Reviews Fuel Pump Gasket Set

JDMSPEED New Universal Inline High Pressure Fuel Pump 12V Gasoline Fuel Injection Pump Replacement 0580464070 0580453911 0580463017 0580464023

  • External Fuel Pump is made of high-density brass and steel alloy, with high hardness, not easy to wear, not easy to corrode, and has a long service life.
  • Package Include: 1 x External Fuel Pump, 2 x Rubber Connection Cover, 2 x Terminal, 1 x Large Gasket, 1 x Small Gasket, 1 x Large Nut, 1 x Small Nut.
  • This is a universal fit pump and depending on your application some adapting will be required, Installation may require skill and knowledge, no instructions are included.
  • Support high power application: 300-800 H，Comes with a 1-3/4'' | 45mm gauge & 1/8'' NPT gauge port, adjustable from 0 to 100 psi to maximum fuel pump capacity.
  • Technical Data: Inlet - ½” (12mm) push on.
  • Flow rate - 135ltr/hr @ 3bar (35 gal/hr @ 45 psi).
  • Interchange Part Number: 0580453911, 0580463017, 0580464023, 0580463010, 0580464008, 0580464032, 0580463011, 0580464013, 0580464033, 0580463012, 0580464014, 0580464038, 0580463013, 0580464015, 0580464048, 0580463014, 0580464016, 0580464050, 0580463015, 0580464019, 0580464051, 0580463016, 0580464020, 0580464055, 0580464056, 0580464070, 0580810046.
  • Universal external in line fuel pump. Does not need to be mounted inside the tank.
  • Use this pump for turbo/non turbo gas fuel in....
Check Stock

Small Block Chevy Overhaul Gasket Set, 350 Chevy, 67-'85

  • Application Range: It fits 1957-1979 small block 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Application Range: It fits 1957-1979 small block Chevy 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Premium Quality: Gaskets provide a reliable means of repairng your engine for your daily street cruiser, tow vehicle, street rod, circle track, dirt track, and drag strip performance racing engines.
  • Gasket set includes the following pieces: Cylinder head gaskets, intake manifold gaskets, valve cover gaskets, exhaust manifold gaskets, timing cover gasket, timing cover seal, oil pan gaskets, water pump gaskets, fuel pump gasket, thermostat water outlet housing gaskets, distributor gasket, o ring valve stem seals, and rear main seal..
Check Stock

CarBole External In Line Fuel Pump: 116 PSI High Pressure Unversal 12V Electric Pump Injection Systems Replacement for 0580464070 With Mounting Bracket Clamp (Red)

  • 100% brand new and high quality. Universal external in line fuel pump. Does not need to be mounted inside the tank.
  • Operation Pressure: 5-8bar (72.5-116 psi).
  • Flow Rate-120LPH at 6.0bar (about 31.7GPH at 87PSI).
  • Flow Rate-100LPH at 7.0bar (26.4GPH at 101.5psi).
  • Replaces 0580464070 and others but not OEM. Great for use with Mega Squirt and other aftermarket systems.
  • This pump is used for turbo/non turbo gas fuel injection systems up to 250bhp.
  • this is a universal fit pump and depending on your application some adapting will be required, installation may require skill and knowledge, no instructions are included.
  • Adopted Fuel Injection Molding Technology to upgrade the plastic parts of the product, which makes the fuel pump more durable, corrosion resistance and improve the service life of the pump.
  • Package including: 1pc high flow external fuel pump, 1pc Mounting Clamp, 2pcs rubber connection covers, 2pcs insulated terminals, 2pcs nuts, 2pcs gasket, 1pc bolt for bracket.
  • NOTE: It can only be used for gasoline and diesel, and CAN NOT be used for fuel containing methanol or ethanol, nor is it suitable for pumping water or oil..
Check Stock

Arko Tractor Parts Kubota V2203 Fuel Pump

  • 100% New Fuel Lift Pump meets OEM quality.
  • Replaces OEM Numbers: 17121-52030, 6655216.
  • The package includes: 1* Fuel Pump and 1* Gasket.
  • If you are not 100% satisfied with your purchase, you can return for exchange or refund within 30 days from the date you receive it..
Check Stock

Viewer Questions: Fuel System Requirements When Converting From Gas to Diesel

  • ... 【Wide Range of Application】Heavy duty single cylinder air- cooled diesel motor engine is suitable for road cutting machine, grinder, water pump, microtiller, air conditioner compressor, microtiller, etc. Packing list:Screw driver + 14-17mm wrench + connecting plate set screw + fixed key + screw gasket + and a 10-12mm wrench+Diesel engine..
Check Stock

Mopar 82208902 Chrome Fuel Filler Door, 1 Pack

  • Please use amazon's part finder filter to confirm if this item will fit your vehicle.
  • Package Included: 1pc New High Performance Fuel Pump + 2pcs Nylon Strainers + Rubber Gasket + Ruber Hose + Stainless Steel Clamps + Universal Connector Wire + Installation Instructions.
  • Installation: This Fuel Pump Can Fit A Large Variety Of Applications. It Comes With Universal Wiring & Strainers. Some Models May Require Modification To Complete Installation.Professional Installation Is Recommended!.
  • Item-condition: 100% Brand New In Factory Original Package. Not refurbished or re-manufactured parts..
  • You can email us if you have any questions.We will reply within 24 hours..
Check Stock

OTOHANS AUTOMOTIVE Outboard Fuel Pump with Gasket for Johnson Evinrude 438556 433387 20-140 hp 48/90/115 18-7352

  • Fuel Pump Compatible with Johnson Evinrude 20hp 25hp 28hp 30hp 33hp 35hp 40hp 45hp 48hp 50hp 55hp 60hp 85hp 88hp 90hp 100hp 112hp 115hp 140hp Replace....
  • A top quality oil pump separator. This oil pump separator may not be the cheapest around, but it is well made, high flow and will handle fluids that....
  • Suitable for virtually all fluids, this will handle kerosene, oils, water etc..
  • Hole Distance: 40mm/1.57inch,Hole Diameter: 5.5mm/0.22inch,Package include: 1 x Fuel Pumpp, 1 x Gasket.
  • Aluminum alloy low pressure casting, high density, not easy to leak oil.
Check Stock

Ruma Carburetor Air Cleaner Air Housing Recoil Starter Kit for Honda GX120 GX160 GX200 Harbor Freight Predator 212cc 173cc Lifan Rato Loncin Engine Power Equipment

  • This kit includes carburetor, air cleaner assembly, recoil starter assembly, on off engine stop switch, spark plug, fuel tube,tube clips fuel joint, gasket set for carburetor, muffler and valve cover,, nuts for carburetor and muffler, bolts for recoil starter. It's a perfect rebuilding kit for your motors. Quality warranty. Full refund if any issue..
  • Fits Honda GX120 GX160 GX200 engine,water pump, pressure washer, compressor and more other equipment with the mentioned engines.
  • Fits Harbor Freight Predator 212CC 173cc 6.5Hp, 7Hp,R210 Lifan, Rato, Loncin engine, cart, pressure washer, water pump, compressor 56174 56172 63079 63080 63089 63090 67561 69676 67560 68121 68120 68527 68528 69727 69729 69730 96838 96898.
  • Harbor Freight Greyhound 196CC 6.5HP LIFAN - 66014 66015.
  • Harbor Freight Central Machinery 96549 96500 94187 and more.
  • Fits Generac 196cc 208cc engine and other equipment.
Check Stock

Arko Tractor Parts New 4.236-4.248 Fuel Lift Transfer Pump for Caterpillar Perkins 416 426 V60C +

  • 100% New Fuel Lift Pump meets OEM quality.
  • Replaces OEM Numbers: 4222108M91, 3637290M91, 3637300M91, 3637444M91, 3640785M1, 3641402M91, 3641408M91, 375839X1, 376522X1, 4222091M91, 4222091V91,....
  • The package includes: 1* Fuel Pump and 1* Gasket.
  • If you are not 100% satisfied with your purchase, you can return for exchange or refund within 30 days from the date you receive it..
Check Stock

Ruma Air Filter Spark Plug Carburetor Kit for Honda GX120 GX160 GX200 5.5Hp 6.5Hp Engine Harbor Freight 212 173 R210 196cc 208cc 212cc Engine and More

  • This tune up kit includes carburetor, air filter, spark plug, insulator, on off stop switch, gasket set, fuel line, fuel joint , fuel line clips, mounting nuts for carburetor and muffler. It's a perfect rebuilding kit..
  • Fits Honda GX120 GX160 GX200 engine and many other equipment with these engines.
  • Fits Harbor Freight Predator 212CC 173cc 6.5Hp, 7Hp,R210 Lifan, Rato, Loncin engine, pressure washer, water pump, compressor 56174 56172 63079 63080 63089 63090 67561 69676 67560 68121 68120 68527 68528 69727 69729 69730 96838 96898.
  • Harbor Freight Greyhound 196CC 6.5HP LIFAN - 66014 66015.
  • Harbor Freight Central Machinery 96549 96500 94187 and more.
Check Stock

BYS No VRO Fuel Pump PreMix Conversion Kit for Johnson/Evinrude/OMC 5007422

  • ➱ Brand new VRO Fuel Pump for Johnson 1991-1998 /Evinrude 1991-2001/OMC.
  • ➱ Replace Part Numbers: 0438402, 0435954, 0435596, 5007422..
  • ➱ Fitment: for Johnson 1991-1998 /Evinrude 1991-2001/OMC..
  • ➱ No oil pump side and no wiring for the oil pump warning system. Pre-mixed fuel oil is required when you use this fuel pump.
  • ➱ Package Includes: 1x Fuel Pump set as images display..
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock