Reviews Fuel Line Connectors

Attwood 93038AI7 Primer Bulb for 3.8 inch ID Fuel Line - Not for use in The U.S.A

  • Fuel line primer bulb is alcohol resistant and suitable for use with leaded or non-leaded fuels. (NOT FOR USE in U.S.A).
  • Double check valve assures correct fuel flow direction and unrestricted flow..
  • Barb end fuel hose connectors included and attached with stainless steel hose clamps..
  • Easy to replace old primer bulbs with common tools. Hose clamps for fuel line on barb connectors required..
  • Check primer bulb and fuel line periodically for leaks, wear or loss of flexibility. Replace as needed..
Check Stock

Dorman 801-600 Fuel Line Repair Tech Tray

  • Cost-effective replacement - saves time and money by replacing only the damaged section. No more difficult manipulation of entire fuel lines.
  • Steel line to nylon line adapters - allows an old steel fuel line to be repaired with updated nylon line.
  • Complete tech tray - straight and elbow connectors included to tackle the most popularapplications.
  • Exclusive features - includes updated tool included for 45°, 90° and 180° connectors.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Lisle 37160 Disconnect Pliers

  • Disconnects Fuel Line and EVAP Line Fittings with Tabs that Must be Depressed to Disengage..
  • Low-profile design with 85° bend allows the tool to fit between the top of the fuel tank and vehicle..
  • Works great on Delphi two tab connectors and some import vehicles..
  • Can also be used on some electrical connectors..
Check Stock

Lisle 35070 Button Connector Pliers

  • Disconnects fuel line, EVAP line and DEF fittings with tabs that must be depressed to disengage..
  • Works great on Delphi two tab connectors and some import vehicles.
  • Can also be used on some electrical connectors.
  • Ratcheting pliers lock in place so two hands can be used to separate connectors.
Check Stock

NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case

  • NexADD 4Pcs Fuel Line Pliers Set Does It All★- Eliminate the problems associated with removing fuel line connectors or undo fuel lines.This set includes 4 Pcs fuel line hose pliers,a hose remover pliers, a 9'' fuel filter caliper, a hose pipe clamp clip and 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!.
  • Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
  • Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum openin....
Check Stock

Sierra International Moeller Marine 053701-10, Six Gallon All-in-1 Fuel Tank Combo Package

  • Industy's first all in one fuel tank combo package.
  • Applications with 2 prong barb engine fitting: 1998 and up Mercury, All J/E, most Yamaha O/B engines.
  • Includes: one Universal fuel line, one quick disconnct to fuel connector, three fuel line connectors (Johnson/Evinrude, Mercury, Yamaha), tank connector with sealant and hose clamp.
Check Stock

Fuel Line Pliers Quick Release Remover Set, 9 inch Fuel Filter Calipers Tools for Auto Removal Fuel Filter Line & 7PCS Air Conditioning Cooling Pipe Hose Circlip Pliers Kit

  • ...asy to grasp, and the jaw has a variety of angles such as 45º/ 90º/ 180º, allowing access to small areas that are difficult to reach. Clamp the jaw on the fuel pipe and remove it easily..
  • 【Wide Application】Fuel Line Disconnect Tool Set used to remove and replace the connectors on the in-line fuel filter. They are suitable for cars of various common brands in daily life,such as Ford/GM /Chrysler/Mazda/Benz/VW/BMW/Audi and can also be used for the connectors of some electrical air conditioning hoses..
  • 【Package Includes】This set includes 3 fuel line hose pliers and 7 different sizes tool to remove/disconnect fittings on fuel lines of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch, a 9 inch fuel filter caliper, a hose pipe clamp clip, 4-in-1 pliers with 45º/ 90º/ 180º, a tool storage bag. It can meet the disassembly and assembly of your daily automobile fuel pipe and air conditioning cooling pipe..
Check Stock

ABN Automotive SAE Air Conditioner & Fuel Line Quick Disconnect 7pc Tool Kit – Plastic Auto AC/Gas Set 1/4 – 7/8in

  • ...ONNECTION: Use the ABN Automotive SAE Air Conditioner & Fuel Line Quick Disconnect 7pc Tool Kit – Plastic Auto AC / Gas Set 1/4 – 7/8” Inch to quickly and easily disconnect air conditioning lines and quick connect fuel lines.
  • If you are replacing or repairing the A/C or fuel line on your car or truck, the connectors require these tools.
  • VARIOUS SIZES: Variety of sizes to disconnect most any automotive AC or fuel line inner retaining tabs.
  • The 7 included tools are SAE standard 1/4-inch, 5/16-inch, 3/8-inch, 1/2-inch, 5/8-inch, 3/4-inch, and 7/8-inch in size.
  • These SAE sizes will also work on metric applications.
  • FITMENT: Disconnects air conditioning line spring lock couplings on Ford, Dodge, and Chrysler cars and pickup trucks.
  • Also works on fuel line quick connect couplings on GM, Ford, Dodge, and Chrysler cars and pickup trucks.
  • EASY STORAGE: Storage plate with simple transportation, safe storage, and quick organization.
  • Each holder peg on plate includes easy-to-read size markings for fast identification.
Check Stock

Lisle 37000 Air Conditioning/Fuel Line Disconnect Tool Set

  • Easily Disconnects Air Conditioning Lines and Quick Connect Fuel Lines. Set of six tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning line. Also works on fuel line quick connect couplings found on GM, Ford, and Chrysler. The 5/16" size fits on push lock connectors found on Ford radiators and transmission lines. Easy to use in confined spaces. Set includes six sizes: 5/16.
Check Stock

Five Oceans FO4281 Reinforced EPA/CARB Fuel Line with Primer Bulb for OMC, Johnson & Evinrude, 6 Feet x 3/8 inches Hose, Compatible with Ethanol Blended Fuels

  • Compatible with OMC, Johnson, and Evinrude engines and tank connectors.
  • 3/8 inches hose with a 6 feet long line. Includes (2) OMC, Johnson, and Evinrude female barb connectors.
  • Premium primer bulb with a 3/8 inches OMC, Johnson and Evinrude Hose Connector.
  • Compatible with ethanol blended fuels & pre-assembled using low permeation fuel line and bulb.
  • Exceeds fuel flow requirements for OMC outboards. Meets current Environmental Protection Agency (EPA) & CARB regulations . FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

Five Oceans FO3100-C1 Reinforced EPA/CARB Fuel Line with Primer Bulb (Kit to Assemble) for OMC, Johnson & Evinrude, 6 ft x 5/16 inches Hose, Compatible with Ethanol Blended Fuels

  • FIVE OCEANS KIT includes: Primer Bulb Fuel Line with 5/16 inches Hose, two (2) OMC, Johnson and Evinrude 5/16 inches barb female connectors (FO-2885) and two (2) Stainless Steel Hose Clamps (FO-2324)..
  • Approved by Environmental Protection Agency (EPA) and CARB regulations..
  • Universal Fuel Line: 5/16 inches Hose with a 6-feet long fuel line (FO-3100). Made of Molded acetal plastic. Meets and exceeds fuel flow requirements for OMC outboards..
  • Compatible with Ethanol Blended Fuels. Engineered low permeation material which prevents fuel evaporation. Not mention, suitable for Boats, RVs, Tractors, and Caravans..
  • FIVE OCEANS with more than 40 years of experience manufactures the best quality products at the most competitive price.. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

Five Oceans 3/8 Marine Fuel Line Yamaha Mercury Outboard Fuel Line Boat Fuel Line Hose EPA/CARB Replaces 22-13563A3 22-13563Q3 22-14213M 2214213Q 22-13563Q7 22-13563A7 22-13563A6 22-13563T7

  • COMPATIBILITY: Fuel line hose connector, female, with 3/8 Inch hose barb for use on Force 40 hp & larger (1993 & newer), 9.9/15/25 hp (1998), and all Mercury/Mariner outboards using clip-on type disconnect at engine end & 3/8 Inch I.D. fuel line. All Yamaha/Mercury Outboards and Mercury Fuel Tank Side - 1 End Replaces Original Mercury (OE) Part #: 22-13563A3, 22-13563Q3, 22-14213M, 2214213Q and 1 End Replaces Original Mercury (OE) Part #: 22-13563Q7, 22-13563A7, 22-13563A6, 22-13563T7.
  • PACKAGE INCLUDES: Fuel Line Assembly 3/8 Inch Hose 6 Feet Long, a Premium Primer Bulb, 2 Mercury Female Quick Connectors, and 2 Stainless Steel Hose Clamps.
  • MULTI-LAYER: Low-permeation Primer Bulb 3/8 Inch Hose that provides reliable and efficient priming to help start your boat engine.
  • FUEL COMPATIBILITY: Primarily used for fuel feed. Compatible with gasoline up to 85% ethanol-blended fuels, diesel, and all bio-diesel blends.
  • DURABLE MATERIAL: Engineered and designed with marine-grade material. This Fuel line is weather and UV Resistant. Meets USCG type B1-15 SAE J1527 and ABYC Accepted Standards. Reinforce Hose Approved by Environmental Protection Agency EPA and CARB regulations.
Check Stock

Glarks 3Pcs Fuel Line Pliers Set, 9 Inch Fuel Filter Caliper Hose Pipe Clamp Clip and 80 Degree Disconnect Pliers Set for Auto Maintenance

  • .... The handle is made of PVC material, can provide you with a comfortable grip, and will not slip easily..
  • ♣【Ergonomic Design】: The spring design of the fuel filer caliper can help you save energy during operation, allowing you to complete the work with one hand. The curved jaws are specially used to remove the connectors on the tubing, which is faster and easier than other tools..
  • ♣【80 Degree Bending】: If you have used other tools to handle old hardened plugs before, then this 80 degree disconnect pliers will allow you to experience its professionalism. Compared with needle-nose pliers, the curved jaws are more suitable for operation in narrow spaces and can also protect your hands from injury..
  • ♣【Widely Application】: These pliers are produced for removing and replacing the connections on the in-line fuel filter, applicable to various common brands of cars on the daily life, can also be used on some electrical connectors..
Check Stock