Reviews Frsky Drone Transmitter

FrSky XM Plus Mini Receiver up to 16CH 1.6g Full Range fit for Micro Drone XM

  • Notes： Flash the internal RF module of the ACCST transmitter to V2 version, and then bind the XM+ RXSR receiver.This insanely tiny 2.4GHz diversity....
  • XM Plus Receiver supports failsage function for all channels. Protect your perfectly henever the control signal is lost for a period of time.
  • Up to 16CH from SBUS ( CH1-CH15 for PWM, CH16 RSSI for FC,such as F3, Naze32 flight controller ). Compatible ------ Compatible with Frsky X9D Plus X9E....
  • weight:1.6g, Dimension: 21.5*12*3.5mm(L x W x H).Frsky XM Plus mini receiver is perfect for those racers who are looking to lower their AUW,....
  • FrSky XM Plus is dual antenna ( Frsky XM is only one), with dual antenna, it has strong anti-interference, make sure you can control your drone....
Check Stock

ARRIS Dazzle 5 Inch FPV Racing Drone RC Quadcopter RTF withFrsky Q X7 Transmitter

  • ARRIS Dazzle is a 5" fpv racing drone specially designed for freestyle flying.With the low gravity center design, 4mm double lower plate, 5mm arm design, it is super durable and agile for freestyle..
  • The RTF drone includeds ARRIS X2206 2450KV high efficiency brushless motor, Diatone Mamba F405 with 30A 4in1 ESC Stack, T-motor T5143S 5" propeller, Rush Tank racing edition video transmitter,Arris 2.1mm 1200TVLcamera and Foxeer lollipop antenna, Frsky Q X7 radio and receiver..
  • Classic True "X" symmetrical design, great flight feel for freestyle, High strength carbon fiber frame, 5mm thickness arms, super stable and durable.
  • Comaptible with 19x19mm and 16x16mm camera, Rush Tank VTX with Foxeer lollipop antenna gives you long fpv range..
  • The drone is fully asembled and tuned by our professional technician team and bind and fly..
Check Stock

The Drone Racing League

  • 2.Built  with the Frsky R-XSR receiver,so you can bind this drone to your Frsky radio controller.
  • 3.Pre-tuned and freestyle setup, everything you need is just bind-and-fly.
  • 4.This 5inch analog fpv drone design for professional pilot,Recommended: 1300mah 6s lipo battery..
  • 5.When you have any question,just write to us at first time,we will provide best customer service..
Check Stock

SAUJNN Jumper T8SG Hall Gimbal Multi-Protocol Advanced OLED Transmitter for Flysky for Frsky RC Models Transmitter Part

  • 【FPV Simulator】Compared with other remote controllers, LiteRadios 2SE has the function of FPV simulator which can acts as a USB Joystick when connected to a personal computer. So you could use it to play FPV simulators like EREADRONE..
  • 【Multi-Protocol Mode】LiteRadio 2 SE Supports the Frsky / Futaba, pilots can easily change Futaba, Frsky D8, Frsky D16 and Frsky LBT D16 mode via the radio transmitter. Please kindly note: D16 protocol currently does not support the Frsky receivers with ACCST 2.0 firmware or higher, and it can only bind with ACCST 1.X firmware version XM+ receivers..
  • 【System Upgrade】Updates with BETAFPV self-developed LiteRadio System. The pilot can directly operate the Joystick Calibration and Upgrade Firmware on the radio transmitter，which is more convenient for the beginner racer to operate..
  • 【Ergonomic design】 LiteRadio 2 SE is ergonomic and has the shape of a gaming controller. It's comfortable to hold, and the anti-slip texture on the handles allows for a solid grip..
  • 【Enjoy Control】Equipped with a built-in 1000 mAh 1S battery, LiteRadio 2 SE can use up to 8 hours, bringing an excellent endurance performance and and enjoy control..
Check Stock

BETAFPV LiteRadio 1 Radio Transmitter with CC2500 System 8CH Remote Controller Support FPV Simulator Compatible for FPV Racing Drone Fly and FPV Beginners Teenagers - Frsky D8 Mode 2

  • 【Application Scenarios】LiteRadio 1 Radio Transmitter features a small size with an ergonomics design and anti-slip texture for adolescents or those who prefer to use mini radio transmitter. Also suitable for beginners to learn to fly drones, and a good choice as a gift to kids or friends. What is more, a more affordable opportunity for schools or training centers..
  • 【Support Simulator】Not only can bind quadcopters that are built in Frsky or Futaba receiver but also support USB joysticks mode, which means that beginners can learn and practice through simulators before they start a real flight. Support majority flying simulators like Liftoff, DRL/DCL, Uncreashed, Orqa FPV. More convenient for practicing and charging at the same time..
  • 【CC2500 System】Build in CC2500 2.4G system, it supports Futaba S-FHSS/Frsky FCC D16/Frsky LBT D16/Frsky D8 protocols, which are mainly used in the market. LiteRadio 1 Radio Transmitter is compatible with many BNF quadcopters with such receivers..
  • 【Spare Gimbals】Two grip styles for pilots, LiteRadio 1 Radio Transmitter comes with thumb stick ends out of the factory, which features a flat surface and larger space to be able to roll thumbs around. Besides, we prepare two pinch stick ends in the package for those ....
Check Stock

HAPPYMODEL Mobula6 HD 1S 65mm Brushless Quadcopter Mobula 6 HD FPV Racing Drone RTF Frsky Version with LiteRadio 2 Radio Transmitter Mode 2

  • Receiver option: Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode).
  • Mobula6 HD Come with Runcam Split3-lite 1080P HD DVR , Extreme light 1S 65mm Brushless HD only 27g.
  • LiteRadio 2 Radio Transmitter System: Bayang Protocol / Frsky Protocol.
  • Transmitter LED Light: Green-Power On / Red-Warning / Blue-Normal.
  • Package include: Mobula6 HD + LiteRadio 2 Radio Transmitter ( Mode 2 ).
Check Stock

SAUJNN Jumper T8SG Plus V2.0 Hall Gimbal OLED Display Advanced Multi-protocal Transmitter JR/FrSKY Compatible Module

  • High Quality Universal RC Controller Carrying Case Bag for Jumper WFLY RadioLink FrSky Transmitter.
  • Durable, portable and lightweight, fit for most RC radio transmitter, like Jumper T8SG Plus V3, T12 Pro,T16 Pro Hall V2, T18 T18 Pro, T18 Lite, WFLY WFT07, WFT09, ET07, WFT07, RadioLink AT9, AT9S, AT10 and FrSky X9D.
  • Two-way z1pper design and rubber handle , well protect your device from bumps dents and scratches.
  • High-density foam interior with pre-cut compartments for the transmitter and accessories.
  • Note: Some transmitter might require trimming of the foam insert to fit properly.
Check Stock

HAPPYMODEL Mobula6 1S 65mm Brushless Whoop Drone Mobula 6 BNF AIO 4IN1 Crazybee F4 Lite Flight Controller Built-in 5.8G VTX RC Toy Gift (25000KV Frsky)

  • Flight Controller: (Frsky SPI RX Version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR.
  • (Flysky SPI RX Version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS.
  • Receiver Option: Internal SPI Frsky Version (Compatible with ACCST D8/D16, Recommend Non EU transmitter D8 mode).
  • Internal SPI Flysky version(Compatible with AFHDS 8CH and AFHDS-2A 14CH Flysky transmitter).
  • Motor Speed Option: SE0802 KV25000(Race Edition).
  • Onboard 4in1 ESC : Support BLHeliSuite Programmable.
  • AIO 4IN1 Crazybee F4 Lite Flight Controller built-in 5.8G VTX.
  • Extreme Light 1S 65mm Brushless Whoop only 20g.
  • Runcam Nano3 The Lightest 1/3 CMOS 800TVL Camera.
Check Stock

Happymodel Mobula6 Quadcopter Indoor Four-axis 1S 65mm Brushless Bwhoop Drone BNF AIO 4IN1 Crazybee F4 Lite Flight Controll Built-in 5.8G VTX Parts Without Remote Controller (25000KV Frsky RX)

  • Flight controller: (Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR.
  • (Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS.
  • Onboard 4in1 ESC: MCU upgraded to EFM8BB21.
  • Current: 5A continuous peak 6A (3 seconds).
  • OnboardFrsky SPI D8 receiver Version: SPI BUS receiver Frsky D8 compatible.
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m.
  • OnboardFlysky SPIreceiver Version: SPI BUS receiver.
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m.
Check Stock

BETAFPV F4 1S Brushed Flight Controller with SPI Frsky D8 Receiver Support OSD Customized RGB Lights with 55mm BT2.0 Connector Power Cable Compatible for 1S Brushed Drone Like Beta65S

  • 【Upgrade】Classical BETAFPV F4 1S brushed flight controller V2.0 comes back with a new cross particular shape, and it adopts BT2.0 connector cable instead of BT2.0. It is compatible with Beta65S 1S brushed whoop drone..
  • 【Protocol】Build-in CC2500 chip, the default protocol is configured to Frsky D8 out of the factory and can be adjusted to  Frsky D16 FCC, Frsky D16 LBT, or Futaba. Pilots could set up the protocol according to their needs in Betaflight Configurator..
  • 【Cable】The power cable applies BT2.0 connector instead of PH2.0, which solves the problem of voltage sag, and the discharge can be more efficient, bringing this board a better performance on function for power and responsiveness..
  • 【RGB】It supports custom RGB lights on the Betaflight configuration, you can DIY it by your hobby, which makes your drone unique from others..
  • 【Support】Firmware and Cli Dump file for F4 Brushed Flight Controller, some basic guidance and typical FAQ, please visit our official website..
Check Stock

BETAFPV Beta65S Lite Frsky D8 1S Tiny Brushed Whoop FPV Drone with Camera V3 Flight Controller Built-in receiver Support Two Modes

  • 【Tiny Drone】 BETAFPV 65S Lite brushed whoop drone is the smaller FPV Drone 25g (without battery), suitable for most controllers on the market..
  • 【Equipment】The Flight time 3-4 minutes (1S 300mAh recommended). This BETAFPV 65S Lite drone is came up with C02 Micro Camera bring you a clearer....
  • 【Upgrade & Sturdiness】Beta65S Lite has been upgraded Brushed FC V3 Frsky D8 with 7x16mm brushed motors， make drone have better flight....
  • 【Small and light】 The tiny drone Beta65S Lite is a perfect indoor drone. It can be easily operated in a small space. It is compact and portable....
  • 【Humanized design】The structured style and four propeller brackets ensure safe flight and protect you from the physical injury of the rotating....
Check Stock

BETAFPV Meteor65 1S Micro FPV Whoop Drone Quadcopter for FPV Racing Freestyle Flight Indoor Outdoor with F4 1S 5A Flight Controller 0802SE 19500KV Motor C03 Camera - Frsky

  • ..., the lightest F4 1S 5A FC (2022), new 0802SE 19500KV motors, and a C03 FPV camera. With the combination of those electronics and parts, it reaches the best balance between performance, weight, durability, and premium build design..
  • 【F4 1S 5A FC】The flight controller of Meteor65 has been upgraded to F4 1S 5A SPI Frsky V3.0. with a high-quality BMI270 gyro and BB51 ESC hardware. Reserve two UART ports, frsky version also can be used as the PNP version. Therefore, pilots can connect the external receiver to it..
  • 【Power System】By using the latest 0802SE 19500KV motors and 31mm 3-blade props, this equipment ensures excellent performance of power and thrust. Makes the perfect dynamic balance, which gives the drone more flexibility and longer flying time..
  • 【Camera&Canopy】Built-in 1.52g ultralight weight C03 camera, offer a high-quality, clear and sharper images to pilots. Adopted with a injection molding canopy which only 1.60g, more durable, anti-ruin, and heat-resitant, gives your whoop drone a good protection..
  • 【BT2.0 Connector】BT2.0 connector has decreased internal resistance of connector effectively allowing more current to be transferred, which means it supports 9A continuous current (15A burst). Pilots can enjoy more flight time without....
Check Stock

Top Race Drone Clip Remote Control Object Launcher - Release and Drop Drones Delivery (180 Feet) - Drone Drop Release

  • PATENTED PRODUCT: The Top Race Drone Clip is a breakthrough in the drone accessories industry which will finally allow you to launch and deliver products with your own drone..
  • PREPARE FOR A LOAD OF FUN: The Release and Drop accessory for drones attaches to any heavy lift drones such as the DJI Phantom, Syma X8W or even Top Race TR-Q511. or Syma X5C The Top Race Drone Clip can hold up to 200 Grams/7 oz.
  • EASY INSTALLATION: The Top Race Drone Clip installs extremely easy, Simply wrap the included strip around your drone, pair transmitter with clip, load your desired object, fly drone and release whenever you are ready..
  • LONG PLAYING TIME: The RC object launcher drone accessory Can operate up to 2 hours on 1 charge and the transmitter works at a distance of 180 feet so you can fly high over your kids and dump over them the included water balloonsable, Remote Transmitter, Parachute and water balloons (to start you off with the fun...).
  • Great Gift - This is a perfect gift to offer to your loved ones!.
Check Stock