Reviews Front rear Hub Spindles

2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS

  • Brand New Suspension & 12" Wilwood Brake Kit For 1955-1957 Chevys with 2" Drop Spindles (Part # GMB5557X-K72). This specific set features 2" drop spindles, Rotors, and Red Dynalite 4 piston front calipers & Red Dynalite 4 piston rear calipers. Fits: 1955-1957 Chevrolet Bel Air, Delray, 150, & 210. Excludes All Station Wagons, Sedan Deliveries, and Nomads due to their Bowtie shaped gas tank that requires a centered housing rear end, as opposed to a centered pinion rear end..
  • Includes: *Currie 9-Plus Notch-Back rear end with 31 spline axles (#CE-GMB5557X): Currie crate rear ends are designed to be a bolt-in upgrade. Built to the stock 60” width & pinion specs. Heavy-duty 2" wide leaf spring pads are installed in the stock location for easy bolt-in installation *Southwest Speed 9" Ford Rear End Third Member With Posi Trac-Loc (#603-2078): This kit comes with a 3.70 ratio gear, which is a good cruising ratio. We have ratios from 3.50 to 5.00 that can be substituted in.
  • *Southwest Speed 2" Drop Spindles (SWS Part # 103-9760): SWS drop spindles provide a full 2" drop, while not changing the vehicle's steering geome....
Check Stock

NEW 2\ DROP SUSPENSION & WILWOOD BRAKE SET, SPINDLES, CURRIE REAR END & AXLES, POSI, 11\ DRILLED DISCS, BLACK CALIPERS, MASTER, BOOSTER, ARMS, 1968 1969 1970 1971 1972 CHEVELLE EL CAMINO CUTLASS GTO

  • Brand New Suspension and Brake Kit, with 2" Drop Spindles, for 1968-1972 GM A-Body Cars (Part # GMA6872X-K73) 003e This specific set features 2" Drop Spindles, Steering Arms, and Wilwood brakes with Drilled/Slotted Rotors and Black Calipers.
  • Includes: | Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMA6872X) | Southwest Speed 9" Ford Rear End Third Member with Posi Trac-Loc (SWS Part # 603-2078) | Southwest Speed 2" Drop Spindles (SWS Part # 103-9776) | Southwest Speed Steering Arms (SWS Part # 101-9652).
  • Wilwood Disc Brake Kit with Drilled Rotors and Black Calipers (Wilwood Part # 140-10996-D Front and # 140-140-11389-D Rear) | *** These Brake kits require at least 15" diameter wheels ***.
  • Front Brake Kit includes 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors 003e Forged Dynalite 4 Piston Calipers - Black 003e Caliper Mounting Brackets 003e BP-10 Brake Pads 003e Hubs, Bearings, Seals 003e All hardware to install | Rear Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile Dynapro 4 Piston Calipers - Black 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Brake Pads 003e All hardware to install.
Check Stock

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle

  • Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

Dyad Shimano Dynamo Hub 36h 700c Road Cylcocross Gravel Bike Wheelset

  • Velocity Dyad Shimano Dynamo DH-S501 Hub 36h 700c Road Cylcocross Gravel Bike Wheels HD HEAVY DUTY Wheels that will never leave you without power! These are perfect for long road tours, commuting, or just about anything else! They're built with light and strong DT Swiss Competition Double Butted Spokes, Durable Velocity Dyad rims, and Shimano Hubs!.
  • The front hub includes a cover for the centerlock disc mount. New Velocity Black Dyad 36 Hole Rims - 18.6mm Inner Width, 24mm outer width, shaped like their A23 rims but thicker all around. Machined braking surface. The addition of a generator in the front hub allows you to have an always-ready source for lights! Shimano Alfine DH-S501 Dynamo Hub Front Hub Shimano Deore Rear Hub Shimano and SRAM 8, 9, 10 Speed Cassettes Fit This Wheelset 11speed Mountain cassettes fit or the Shimano HG700 HG800.
  • DT Swiss Brass Nipples Includes Shimano Quick Releases 700c Clincher These rims are not designed for tubeless tires 135mm Rear Spacing 100mm Front Spacing Actual Weight: 1372g Front 1171 Rear.
Check Stock

GXFWJD MTB Rim 26 Inch Wheelset Bicycle Front Rear Wheel 32 Spoke Mountain Bike Wheelset Disc/Rim Brake 7 8 9 10 11 Speed Cassette QR Sealed Bearing Hubs Delivery from USA

  • 26 inch MTB wheelset, mountain bike front and rear wheels，Disc/Rim/V brake..
  • AL6061 Double wall alloy rim, Weight: 2300g / pair，F/960g， R/1240g, QR:100g。.
  • Compatible Shimano & Sram 7/8/9/10/11s cassette..
  • AL7075 Aluminum alloy hub, front 9x100mm, rear hub 10x135mm, front 2 rear 4 NBK sealed bearing。.
  • Handmade standard, 6-claw base system and Front Hub 32H, rear Hub 32H, high strength Stainless steel round spokes, Withstand 220kg body weight..
Check Stock

GTW EZGO RXV 5 inch Frame Lift Kit (for 08-13 Electric Models)

  • Fits the E-Z-GO RXV 2008-2013 Electric Models Only.
  • Comes with a front frame lift, new spindles, rear risers & all hardware to lift the front and rear of your cart 5".
  • Please note: If your cart features pins in the rear axle (a change made in 2013), this kit will not be compatible.
Check Stock

Professional EZ Travel Collection, Heavy Load Flat Free Wagon Dolly Cart Tire (10\ / 5/8\ Center Hold Shaft)

  • (2) Alcoa Front Hub Covers # 001611 (2) Alcoa Rear Hub Covers.
Check Stock

HOMFLOW （US Stock） Mountain Bike Wheelset 26 Inch Double Wall Aluminum Alloy Disc Brake MTB Wheels 7/8/9/10 Speed Cassette Flywheel QR 32 Holes (Color : Gold, Size : 26IN)

  • RIM: 26-inch Aluminum alloy double-layer disc brake rim, height 21mm, The outer width of the rim is 27 mm, inner width of about 20mm, supporting tires between 26*1.35-2.35.
  • HUB: Quick release, front hub 9 * 100MM, rear hub 9 * 135MM, wheel hub, aluminum alloy shaft, Disc brakes..
  • SPOKES: 32 holes spokes at the front and rear, and No. 45 steel rods (not stainless steel) front wheel 1024G, rear wheel 1243G.
  • SPEED: Compatible with 7/8/9/10-speed cassette flywheel, 7-speed needs to be installed with washer, Standard American valve..
  • PACKING LIST：1 * Wheel Set (Front + Rear)+quick release levers x2, rim tape x2. ★ (Note) We will after you place the order 3-7 working days Delivered to you.
Check Stock

Wheel Bearing Install/Removal Press Tool for Polaris RZR 900 1000 Turbo/Sportsman 1000 850 XP 550 / Scrambler 850 1000 / Ranger 1000 900 800 700 570 500 XP

  • BENIFITS - Using this installation and removal tool,Changing your wheel bearings become fast and correctly.
  • USAGE - This kit includes a holder for the rear hub and then a driver to press the old bearing out of the hub. After removal,flip over the hub and....
  • APPLICATION - Fits the following models and more using hub part number 5136689, 5136690 and wheel bearing part number 3514699 and 3514627:.
  • 2011-18 RZR 900 (All models, front and rear bearings) 2014-18 RZR 1000 (All models including Turbo, front and rear bearings).
  • INCLUDES - (1) Torpedo Installer Tool (1) Holder.
Check Stock

OEM TOOLS 27213 Master Wheel Hub & Bearing Remover & Installer Kit Back & Front Wheel Bearing Puller Kit Back & Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: Remove the need for a shop press with our wheel hub bearing press tool.
  • Save time removing even seized-up wheel hub and bearing....
  • FOR PRO AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing on German....
  • TIME-SAVING BEARING TOOL: No need to remove the strut assembly or knuckle to remove/install the hub and bearing.
  • VARIETY OF ADAPTERS: Service your vehicles easily with our rear and front wheel bearing removal kit.
  • This wheel bearing removal tool features all the....
  • DURABLE STEEL CONSTRUCTION: Our rear and front wheel drive bearing adapter kit's steel design holds up to the torque required to remove hubs and....
Check Stock