Reviews Front Camera Flex Cable

Afeax OEM iPhone Face Front Camera with Sensor Proximity Light Replacement for iPhone 8 4.7 inch

  • Brand New and original iPhone 8 front camera replacement.Tested before shipping and is 100% working.
  • Part includes the front camera, secondary microphone,and ambient light and proximity sensors.
  • Best replacement for damaged front face camera proximity light sensor flex cable for iPhone 8 4.7inch.
  • We may use little ink to block the apple logo due to some sensitive law requirement.
  • We are confident with our product,you will get a full refund if you aren't pleased with this product or have any problem with 1 year warranty.
Check Stock

Afeax OEM Compatible with iPhone Face Front Camera with Sensor Proximity Light and Microphone Flex Cable Replacement for iPhone 7 4.7

  • 100% brand new and OEM iphone front camera,all of the item tested one by one.
  • Best replacement for your defective or damaged 7 front facing camera proximity sensor flex cable,if your iphone 7 front camera Mic Sensor Light Motion....
  • Compatible: Iphone 7 4.7" A1660(GSM,CDMA), A1778, A1779 (ALL CARRIERS),we may use ink to block the apple logo because of some sensitive law....
  • 100% MONEY-BACK GUARANTEE: Fast shipping with 12 months quality warranty, you will get refund or guarantee a new replacement if there are any quality....
Check Stock

Afeax Compatible with Apple iPhone Front Facing Camera Flex Cable with Sensor Proximity Light and Microphone Flex Cable Replacement for iPhone 6s Plus 5.5 inch

  • 100% brand new and original,we test every item before shipping to make sure 100% working.
  • Great replacement for Iphone 6s Plus 5.5" for defective front facing camera proximity sensor flex cable,if your iphone 6s Plus front camera Mic Sensor Light Motion defect or none-working.
  • We are care deeply about customer satisfaction,provide 1 year warranty for any quality problem..
  • Since camera replacement installment is not easy job,so remember to check instruction video on youtube.
Check Stock

Afeax Compatible with OEM Apple iPhone Face Front Camera Flex Cable with Sensor Proximity Light and Microphone Flex Cable Replacement for iPhone 8 Plus 5.5inch

  • 100% Brand New and Original.Tested one by one and is 100% working.
  • OEM Part includes the front camera,secondary microphone, and ambient light and proximity sensors..
  • Best replacement for damaged front face camera proximity light sensor flex cable for iphone 8 plus 5.5 inch.
  • We are confident with our product,and you will get a full refund if you aren't pleased with this product or have any problem.
Check Stock

Xmipbs Disassemble Original Gimbal Camera Arm with Signal Canble and Flex Cables for DJI Mavic Pro Replacement Drone Repair Parts

  • Original Refurbished Repair Parts for DJI Mavic Pro Drone..
  • Mavic Pro Gimbal camera arm with flex cable and signal cable.
  • Compact and lightweight, portable to carry and easy..
  • With flex cable and signal cable for repairing the damaged ones..
Check Stock

Hjá Tær

  • √【Newest Upgrade】10 Inch Mirror Dash Cam Streaming Media Full Touch Screen dash cam, Both 1080P front and 1080P rear camera, Super night vision,....
  • √【Dual 1080P+10 meters long camera cable】Upgrade both 1080P backup camera and long camera cable, our unique 10 meters back camera cable(32.8ft),....
  • √【Super Night Vision & Safe Parking】 Analogy High Definition of backup camera, both 1080P front and 1080p backup camera presents super night....
  • √【Thoughtful User Interface & Powerful Functions】Thoughtful and friendly user interface for you to operate. The brightness can be adjusted by....
  • √【Easy Installation & Professional Team】With unique long 10 meters backup camera cable(32.8ft), it’s easy for you to install the cameras even....
Check Stock

2 Pairs OEM DJI 9450 Self-Tightening Propellers(Metal Hub), Use for Phantom 3 Pro/Adv/Sta, Phantom 2/2 Vision/2 Vision Plus

  • Replacement Flex Ribbon Cable Compatible for DJI Phantom 2 Vision Plus Gimbal Camera.
  • High Quality, Tear Resistant Polyimide (PI) with immersion Gold Finger contacts.
  • DJI Phantom 2 Vision+ OEM Gimbal Replacement Flex Ribbon Cable.
  • Same cable thickness as original DJI ribbon cable.
  • Engineered 100% DJI compatible with extra heavy power traces for higher performance.
Check Stock

BIGTREETECH Upgrade PI TFT70 TFT LCD Display DSI 800x480 for Raspberry Pi Model 3D Printer Controller 7in Capacitive Touch Screen 165X100mm

  • The high-quality ribbon flex cable is soft and compact, easy to install, perfect show video..
  • Feature: the fit for Raspberry Pi camera cable each end is reinforced with a stiffener to make insertion easier. Work fine with your need and would be....
  • Easy to use: directly-pluggable, one end of the cable is 15 Pin 1.0mm Pitch interface to for Raspberry Pi camera and another end with 15 Pin 1.0mm....
  • Compatible: the cable fit for Raspberry Pi Model A/B/B+, Pi 2B, Raspberry Pi 3B, 3B+, Pi 4B, camera module and display.
  • If you have any issues for Raspberry Pi Camera Cable, please contact us, we will do our best for you..
Check Stock

Tailgate Emblem W/Reverse Backup Camera Replacement for 2004-2016 Ford F150 F250 F350 F450 F550 Flex (2009-2012) Rear Backup Camera W/Guideline | Night Vision | IP69 Waterproof

  • 【NOTICE】This emblem backup camera is aftermarket and will NOT work for FACTORY & OEM monitor and please measure your space and emblem before purchasing.
  • 【FITS】Replacement for 2004-2016 Ford F150 F250 F350 F450 F550 Flex (2009-2012),the tailgate emblem backup camera fits like OEM..
  • 【INSTALL】This backup camera can be connected to any aftermarket monitor with a Yellow RCA input. There was plenty of cable to reach the front of the truck,On some older models, you may need to drill a small hole in your tailgate to run the wiring through..
  • 【CAMERA】HD wide-angle camera with 0.1Lux sensitivity to enhanced night visibility, it is very useful while reversing your truck and trailer. IP69 Waterproof, work normally even in bad weather..
  • 【WARRANTY】We provide 180 days warranty. During the warranty period, if you have any questions, please contact us first, and we will provide you with a new replacement..
Check Stock

Aokin for Raspberry Pi Camera Cable, FFC Cable Ribbon Flex Extension Cable 15 Pin 1.0mm Pitch for Raspberry Pi, Octoprint Octopi Webcam, Monitor 3D Printer, etc, 50cm/19.68in

  • The high-quality ribbon flex cable is soft and compact, easy to install, perfect show video..
  • Feature: the fit Raspberry Pi camera cable each end is reinforced with a stiffener to make insertion easier. Work fine with your need and would be flexible with camera placement..
  • Easy to use: directly-pluggable, one end of the cable is 15 Pin 1.0mm Pitch interface to Raspberry Pi camera and another end with 15 Pin 1.0mm Pitch interface to Raspberry Pi board..
  • Compatible: the cable fit for Raspberry Pi Model A/B/B+, Pi 2B, Raspberry Pi 3B, 3B+, Pi 4B, camera module and display.
  • also use for LCD, LCD TV, car navigation, car audio, laptop, PC, DVD player, recorder, printer, copy machine, etc. Model: FFC.
  • If you have any issues for Raspberry Pi Camera Cable, please contact us, we will do our best for you..
Check Stock

Upgraded 10'' Mirror Dash Cam Rear View Mirror Camera Front and Rear 1080P Backup Camera FHD Full Touch Screen w Loop Recording, G-Sensor, Parking Monitor 170° Wide Angle

  • √【Newest Upgrade】10 Inch Mirror Dash Cam Streaming Media Full Touch Screen dash cam, Both 1080P front and 1080P rear camera, Super night vision, Long 10 meters backup camera cable, support 128G SD card max (not included)..
  • √【Dual 1080P+10 meters long camera cable】Upgrade both 1080P backup camera and long camera cable, our unique 10 meters back camera cable(32.8ft), help you solve the short camera cable issue when installation. Both 1080P front and 1080P backup camera provide great video quality, No longer worry about not seeing clearly other license plates. Real-time transmission of images, full-screen view, the mirror dash cam with wide angle lens eliminates blind spots..
  • √【Super Night Vision & Safe Parking】 Analogy High Definition of backup camera, both 1080P front and 1080p backup camera presents super night vision in low light conditions, and the backup camera display with guidelines assist you safe parking. It is flexible and convenient for you to adjust the view angle by scrolling up and down on the touchscreen and switch the camera back and forth..
  • √【Thoughtful User Interface & Powerful Functions】Thoughtful and friendly user interface for you to operate. The brightness can be adjusted by slide left and right on the screen.....
Check Stock

Pi Camera Arducam Octoprint Octopi Webcam Monitor 3D Printer 3.28FT/100CM Long Extension Flex Ribbon Cable for Raspberry Pi

  • 5MP camera module for 3D printer projects with Raspberry Pi, natively compatible with the official Raspberry Pi camera modules and motherboards.
  • Used on OctoPi, Raspbian, MotionEye for 3D printer monitoring, surveillance camera or other Pi cam projects.
  • 100cm/3.28ft extension cable included, long enough for mounting the camera, especially useful when you don’t want to place the camera near the....
  • Work on raspicam commands and python scripts as you would expect for a new project or drop-in replacement.
  • Package includes 2 flex ribbon cables (15cm/100cm) for Raspberry Pi A&B series. Cable for Pi zero is not included. Search ASIN B087FDJ2RP to get 100cm....
Check Stock

Aokin for Raspberry Pi Camera Module 5MP 1080p with OV5647 Sensor Video Camera Module for Raspberry Pi Model A/B/B+ Pi 2 Raspberry Pi 3 3B+ Pi 4 and Pi Zero/Zero W with Flex Cable

  • Compatible: camera module fit for Raspberry Pi Model A/B/B+, Pi 2B and Raspberry Pi 3B 3B+, Pi 4B, Pi Zero, Pi Zero W..
  • Ribbon flex cable: 11.81in/30cm golden camera cable specially designed for Raspberry Pi zero/zero w.
  • 5.90in/15cm and 19.68in/50cm white camera cable....
  • Specification: 5 Megapixels sensor with OV5647 webcam sensor in a fixed-focus lens.
  • the high-definition video camera is capable of 2592 x 1944 pixel....
  • Endless creativity: 15-pin MIPI camera serial interface - plugs directly into for the Raspberry Pi board.
  • The camera module size: 25mm×24mm×9mm and....
  • If you have any issues for raspberry pi version 1.3 camera module, please contact us by Amazon message, we will do our best for you..
Check Stock