Reviews Four Jaw Puller

ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel

  • [Perform Maintenance with Ease]: Remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool.
  • Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles.
  • [Built to Last]: No need to worry about this hub puller tool falling apart when you need it most.
  • Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • [Optimal Reach]: Struggling to access tight, cramped spaces is a thing of the past.
  • Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application.
  • [Adjustable Performance]: Whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • [Perfect Size]: 2-jaw transmission gear puller measures 6.25 inches (22.2cm) with jaw spread.
  • Universal pulley puller has 4.75-inch (12.1cm) jaw reach for your vehicle maintenance projects.
  • Use any 17mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack.
Check Stock

ABN Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller 5 Piece

  • Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller, Constructed from high strength steel for extra durability and longevity.
  • Allows users to easily service all types of front end issues, everything from tie rods, u joints, ball joints, pitman arms, and others.
  • Includes: 1x Pitman Arm/Tie Rod End Puller, 1x Ball Joint Separator, 1x Pitman Arm Puller, 1x Ball Joint/Tie Rod End Remover, 1x Tie Rod/Inner Bearing Race Puller.
  • Specifications: Large C-shape puller: (1) 1-11/32" Jaw Spread 2-1/2" Throat Depth, (1) Small C-shape puller 1-1/8" Jaw Spread, 2-1/8" Throat Depth, (1) Large swing arm puller 0 to 2-1/2" Jaw Spread 3-1/4" Throat Depth, (1) Small L-shape puller: 3/4" Jaw Spread, 1-3/4" Throat Depth, (1) Large rocker arm puller: 7/8" Jaw Spread, 2-1/4" Throat Depth.
  • This is a must have for anyone servicing vehicles.
Check Stock

MOFEEZ 3\ 4\ 6\ inch 3-Jaw Gear Puller ¨C Gear Removal Tool for Slide Gears, Pulley, and Flywheel

  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6"8" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free.
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity.
  • Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application.
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • The 3-inch and 4-inch gear puller has 3 positions and 6-inch and 8-inch gear pullers both have 6 positions..
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach,and a 8-inch gear puller with a 10.75-inch jaw spread and 8.75-inch jaw reach.
Check Stock

MOFEEZ 3\ 4\ 6\ inch 3-Jaw Gear Puller ¨C Gear Removal Tool for Slide Gears, Pulley, and Flywheel

  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free.
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity.
  • Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application.
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • The 3-inch and 4-inch gear puller has 3 positions and the 6-inch gear pullers have 6 positions.
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach.
Check Stock

DURATECH 3-Piece 3-Jaw Gear Puller, 3\

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free....
Check Stock

DURATECH 8-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

CMTOOL Bearing Puller 3 Jaw Pilot Bearing Puller Blind Bearing Puller Set Bearing Pullers Bushing Gear Puller Small Inner Internal Bearing Puller Kit Car Motorcycle Wheel Pilot Bearing Removal Tool

  • 【Widely Used 3 Jaw Bearing Puller】This 3 jaw pilot bearing puller is widely used in automobile bearings, motorcycle electric car bearings, mechanical bearings, agricultural machinery etc. This bearing puller is easy to operate, easy to use and durable..
  • 【Excellent Design】The bearing puller group adopts a three-jaw design. The three-jaw design can apply uniform pressure, which can effectively prevent slippage and bearing damage, and ensure the bearing puller stability during use. The forged and heat-treated steel jaws in the bearing puller are coated with a corrosion-resistant coating to make them more durable..
  • 【High-Quality Pilot Bearing Puller】 The inner bearing puller is made of high-quality carbon steel through forging and special heat treatment process, so that our bearing puller has high strength, toughness and longer service life..
  • 【Strong 3 Jaw Bearing Puller】 The internal bearing puller has a sturdy structure, high-strength torque and high toughness. As long as the small wrench is turned slightly, it will generate a large pulling force, which can be slip-resistant and firmly grasped, saving time and saving when using (claw length 80 mm).
  • 【Precautions】 The claws of the bearing puller have positive and negative installation met....
Check Stock

DURATECH 6-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 6in, Jaw Reach: 2-9/16in, Puller: 5.7T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

NEIKO 02236A Slide Hammer | 17 Pc Automotive Bearing Hub Puller Kit | Axle Seal Pulling

  • [APPLICATION]: Easily remove mechanical, press-fit parts (bearings, bushings, gears, pulleys, etc.) from a shaft.
  • [QUALITY]: 5-pound steel slide hammer constructed of chrome vanadium steel for smooth operation, improved durability, corrosion resistance..
  • [VERSATILE]: Full hammer kit, ideal for use on a wide variety of pulling applications, including pulling dents.
  • Fits many sizes of bearings, gears and....
  • [PERFECT FOR MECHANICS]: Includes an external 3-jaw puller, internal 3-jaw puller, external 2-jaw puller, internal 2-jaw puller..
  • [INCLUDES]: 5-lb hammer, shank, T-bar assembly, grip wrench adapter, dent puller, pulling (cone) adapter, seal hook in a Hard plastic blow-molded....
Check Stock

Bonvoisin 5T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

OMT Bearing Puller Set 5 Ton Capacity Bearing Separator Pinion Wheel Bearing Removal Kit with 2 and 3 Jaws Wheel Hub Axle Puller Set Heavy Duty Bearing Splitter Tool Kit with Case

  • VERSATILE BEARING PULLER: This Orion Motor Tech bearing puller set enables you to complete a wide range of pulling jobs, ideal for removing large or small bearings on front and rear wheel hub axle shafts, as well as gears, pulleys, and steering wheels.
  • ALL-IN-ONE TOOL KIT: Our bearing separator set includes a 3" bearing separator jaw, 2" bearing separator jaw, 6" yoke, 6-1/4" forcing screw, four 4" extension screws, four 5" extension screws, and two 4-1/2" L-type legs.
  • WIDE APPLICATION: The 2 bearing splitter jaws’ 5 ton capacity ensures they stand up to punishing use.
  • suitable for professionals and home mechanics and compatible with most vehicles, ATVs, and light trucks.
  • EFFECTIVE OPERATION: The knife like taper feature allows the jaws to get behind bearings to securely grip any bearing.
  • the included tools enable you to reach and remove bearings in tight spaces effectively.
  • DURABLE CONSTRUCTION: Constructed from heat treated Cr-V steel with black oxide finish, this pinion bearing puller set ensures corrosion resistance and long-term durability under even punishing use.
Check Stock

Slide Hammer, Orion Motor Tech 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

  • VERSATILE PULLER SET: The Orion Motor Tech 9-Way Slide Hammer Puller Set with 5 lb slide hammer is ideal for many pulling applications like flange-type rear axles, most front-wheel drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.)..
  • INTERNAL & EXTERNAL JAWS: Includes 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals. 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs..
  • MULTI-FUNCTION: Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. All the tools are contained in a heavy-duty organizer case to extend the life of your tools..
  • ULTIMATE DURABILITY: Built to last with rugged carbon steel alloy and chrome vanadium steel components, our tool kit can withstand accidental drops and years of heavy use without cracking or rusting..
  • ALL-IN-ONE TOOL SET: Complete 15 piece set for a wide range of pulling applications, including: Slide Hammer, Puller Head, Pulling Adapter, Cross Block, Internal/External Puller Jaw, Hex Jaw Nuts & Screws (3), Vise-Grip Adapter (single-lead thread), Seal Hook, 3-Way Puller Head, Cone, Self-Tapping Screw and....
Check Stock

DURATECH 4-Piece 3-Jaw Gear Puller, 3', 4', 6', 8', Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CRV

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6, and 8-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaf....
Check Stock