Reviews Four Jaw Chucks

SUNJOYCO Drill Chuck for Impact Driver, 1/4\ Hex Shank Power Drill Chuck Adapter Drill Converter Adapter (0.3-6.5mm,0.3-6.5mm, 2pcs)

  • SPECIFICATION: 2 pieces 3 jaw drill chucks with 1/4" hex shank (0.3-6.5mm,0.3-6.5mm).
  • QUICK CHANGE DRILL CHUCKS: The drill chucks converter could easily concert from fastening to drilling with a 1/4-inch hex shank, allowing you to quickly change tools with one hand..
  • BENEFITS: SUNJOYCO drill chucks for impact drivers eliminate the need for carrying two separate drills during lighter drilling jobs, and allow the use of straight shank and standard drill bits. These handy accessories are easily stored in any toolbox or tool bag..
  • APPLICATIONS: The SUNJOYCO power drill chuck is ideal for starting screw holes in hard-to-reach spaces, and good for light-duty accessories including drill bits, sanding drums, polishing wheels, wire & bristle brushes, and cut-off wheels..
  • WARRANTY: We provide a 2-year warranty policy for these diamond grinding wheels. Buy with confidence. If you have any concerns or questions about our cement grinding wheel, please feel free to contact us..
Check Stock

Hymnorq 1/2-20UNF Keyless Drill Chuck 2-13mm Clamping Range with SDS-plus Shank, 1/2 Socket Square Converter and 1/4 Inch Hex Shank, Fit Impact Hammer, Electric Wrench and Air Screwdriver

  • ...an easily convert your tool to a drill, suitable for multiple connecting needs.
  • The 1/4" hex adapter is for screwdriver, the 1/2" square socket adapter for impact wrench and the SDS-plus adapter for hammer drill / rotary hammer..
  • CONVINIENCE - Compared with keyed chucks, the keyless chucks can hold bits without additional tool, advoiding the inconvinience of keeping and finding a small chuck key.
  • DURABILITY - The chuck is high-precision threaded and tapered tightly with hard rust-resistant pp plastic body. The jaws, spings are made of premium steel alloy. All the extensions are applied with rust-proof finishing for extended service life..
  • WIDE COMPATIBILITY - This drill chuck adapter tool kit is suitable for gyro-screwdriver, wireless screwdriver, impact screwdriver, impact wrench, hammer drill and some angular polishing machines of most brands on the market like Dewalt, Bosch, Dremel, Kobalt, Milwaukee, etc..
Check Stock

Dynarex Disposable Underpad, 17 inches X 24 inches, 100 Count

  • FOR MEDICAL AND HOMECARE USE: The Dynarex Underpads are disposable bed pads for use during medical procedures and care for adult incontinence. These waterproof bed pads, sometimes called chux or chucks, protect sheets, mattresses, and furniture.
  • HIGHLY ABSORBENT AND PREVENTS LEAKAGE: Our disposable bed pads for incontinence are filled with highly absorbent, soft fill. These underpads are sealed on four sides with polymer to provide ultimate absorption and prevent accidental leaks.
  • NON-SKID AND WATERPROOF: The waterproof construction and non-skid blue backing of these chucks pads disposable assure that the pad stays in place and its underside stays dry. These are ideal bed pads disposable for a wide range of applications.
  • MULTIPLE APPLICATIONS: Dynarex Underpads or chucks pads are suitable not only for homecare and medical operations but also for your pets. Our disposable chucks pads for adults and pets secure for you a clean and protected floor or furniture.
  • IDEAL PACKAGING: Each box contains 100 disposable incontinence bed pads, 17” x 24” (22g), for convenient hospital, clinic, and homecare supply. Dynarex provides Best in Class alternative to other leading brands.
Check Stock

Rockwell RW9275 3/8-inch keyless drill chuck for ¼” Hex Drives

  • This light-duty keyless chuck attaches to ¼” hex drives.
  • Allows screwdrivers with ¼” Hex quick-change chucks to use round-shank drill bits.
  • Traditional 3-jaw design with 3/8 maximum shank capacity.
  • Not suitable for impact drivers or applications involving high torque load.
Check Stock

MK Morse 139038-MKM 050326139038, multi, one size

  • Durable, heavy-duty, carbon steel arbors come complete with pilot drills.
  • Adapt Morse hole saws to any power drill used by professionals.
  • Hex arbors with non-slit jaw slots are positive drive.
  • SDS arbors are used in tools having SDS chucks, to drive hole saws in rotary hammers or hammer drills.
Check Stock

Nova TK-48246 Direct Thread 1 Inch Small Wood Turning Chuck Bundle Set with Automatic Jaw Safety Stop and Copper Impregnated Jaw Slides, Reversible

  • SAFE AND SECURE: Anti-release spindle lock (reversible).
  • Ensures chuck will stay securely mounted on the lathe during forward and reverse turning applications.
  • MINIMIZES LOAD: Small size (85-milimeter/3.35-inch) and weight minimizes load on small spindles and bearings.
  • FAST OPERATING ACTION: Ideal for production turning of smaller pieces.
  • ADVANCED FEATURES: Automatic jaw safety stop, copper impregnated jaw slides, and direct thread 1-inch x 8TPI dual thread.
  • SPECIFICATIONS: Up to 350-millimeter/14-inch diameter bowls (using 50-millimeter jaws).
  • Up to 150-millimeter/6-inch length spigots (using 50-millimeter jaws).
  • Takes the same accessory range as all other NOVA chucks.
Check Stock

3-Pack Keyless Chuck 1/32 to 1/8 Replacement 4486 Drill Keyless Bit Chuck Shank Rotary Tool Quick Change Adapter Kit Compatible for Dremel 4486 Model 395 3000 4000 4300 8220 3000 7300 Multipro

  • Quick change keyless chucks holds various accessories with 1/32” to 1/8” shank sizes. Pay attention to measure the contrast size before buying.....
  • 3-jaw chuck compatible for all Dremel cordless and corded rotary tools(including drill bits, sanding drums, polishing wheels and other light-duty....
  • One-piece structure design, alloy material, sturdy and durable, more safer than plastic models. The 3-jaw chuck is well-made, and the built-in spring....
  • This replacement keyless chuck provides a big improvement in precision and holds these tiny bits far more securely and in better alignment with the....
  • Package content: 3 x multipro shank rotary tool accessories keyless chuck..
Check Stock

1/2\ Annular Cutter Round Shank 3/4\ Adapter for Gunsmithing Drilling and Milling Machines to Reduce Barrel OD (Outer Diameter)

  • 1/2” 3-flat to 3/4 Female, for use in 3 Jaw Drill Chucks.
  • Will hold any cutter with a 3/4 inch shank.
  • [Overall Length: 3 inches] [Shaft Length: 1.250 inches] [Shaft Diameter: .375 inches] [Inner Diameter: .752 inches] [Inner Diameter Depth: 1.325].
Check Stock

7-Piece Complete Socket Conversion and Adapter Kit for Ratchet, Extension Bar, Impact Wrench, Impact Driver, Power Drill | Fit All 1/4”, 3/8” and 1/2” Drive Deep and Shallow, Chrome and Impact Sockets

  • Material: chrome vanadium steel. Chrome vanadium steel suitable for heavy duty impact drivers. Spring loaded ball bearings on each square head securely and locks into sockets to avoid slippage during using..
  • This set is perfect for your impact driver or drill, and allows you to replace your ratchet with a power tool. The 1/4" hex shank fits all quick change chucks as well as standard drill chucks..
  • Suitable for a screwdriver or electric screwdriver handle tools (hexagonal hole or three-jaw chuck can) drive sleeve and after use can be installed on the size of the original hexagonal polygons converted to square head size, which can be used to install the sleeve is a good accessory to convert..
  • 8pcs 1/4" 3/8" 1/2" CR-V impact socket adapter Sizes: 4 pieces of 1/4 inch drives, 2 pieces of 3/8 inch drives, 2 pieces of 1/2 inch drives. Compatible with power drills and screwdriver handle tools..
  • Suitable for quick change 1/4" chuck systems or directly into drill chuck. Change your hand socket set into a driven socket set..
Check Stock

Black Panther Luxury PU Leather Rear Car Seat Cover Adjustable Length (49-55'') Back Seat Protector Fits 90% Vehicles (Sedan SUV Truck), for Seat Bottom Only, Triangle Quilting Design, Black

  • Soft Healthy Material - Premium PU leather,super soft and comfortable to touch, four seasons applicable. Waterproof and easy to clean..
  • For Different Seat Sizes - This rear seat cover consists of 3 parts with a length adjustment range of 50 to 55 inches, so it fits different sizes back seat..
  • Wrapped Edge Design for Better Protection - This bench car seat cover can match the original leather seats perfectly, protects your original rear seat from wear and tear..
  • Secure - The non-slip bottom, durable chucks and wrapped edge securely fix the back car seat cover stay in place. It reserves the position for seat belt locks..
  • Easy Installation - You can finish it about 5-10 minutes. Please place the chucks into the elastic bands, cover the seat cover on the right and left, insert the chucks into the seat gap, install the middle pad. If you have any questions about the installation, please contact us, we will help you..
Check Stock

LANTRO JS - 4 Jaw Lathe Chuck, Z011A Zinc Alloy Self Centering Lathe Jaw Chuck Clamp Accessory for Mini Metal Lathe Power Lathe Accessories

  • 3" Dovetail Jaw for turning items with a larger foot.
  • Designed for use on Supernova/Supernova2, G3, Midi, Titan, and original Nova chucks.
  • Ideally suited for the Nova G3 and Midi chuck for turning smaller items with a big foot.
  • Pictures shows jaws mounted on chuck for illustrative purposes only - the chuck is not included..
Check Stock

4-Jaw Self-Centering Chuck Set, Z011 Four Jaw Mini Lathe Chucks w/ Connecting Rod & Wrench, Mini Power Lathe Machine Replacement Parts Accessories (Type C)

  • 【3 Jaw or 4 Jaw Self-Centering Chuck Set for Mini Lathe】- Type B comes with 1 x Connecting Rod + 1 x Three Jaw Chuck + 2 pcs x Short Sticks.
  • Type C - 1 x Connecting Rod + 1 x Four Jaw Chuck + 1 x Wrench. This chuck connecting rod is suitable for Z011 Three Jaw or Four Jaw Woodworking Mini Lathe Chuck..
  • 【Mini Lathe Chuck & Connecting Rod Replacement】- You can use it to replace the old or brocken one. The clamping range of this chuck is between 1.8-56mm, which is suitable for clamping a variety of industrial parts..
  • 【Compact Size, Easy to Use】- Mini Lathe Chuck diameter about 48mm, Outer diameter about 12 mm-65 mm, Inner diameter about 1,8mm-56mm.
  • 2. Connecting Rod size about 5.2cm x 6mm/2.05x0.24inch (LxD), Connecting Thread about M12x1mm. Perfect for mini metal and wood lathes..
  • 【Stainless Steel Chuck Connecting Rod】- The Connecting Rod is made of High carbon steel material, anticorrosion, not easy to rust, durable and sturdy, ensure it has high hardness and can be reused..
  • 【Practical Power Lathe Accessories】- Our chuck connecting rod is stable and has great performance while using, it is the ideal choose for you. High accurate connecting rod so that they can better fit with the Mini Lathe Machine Parts..
Check Stock

IRWIN VISE-GRIP Convertible Snap Ring Pliers, 6-1/2-Inch (2078900)

  • For internal and external use, eliminating the need for 2 sets of pliers.
  • Includes four interchangeable tips for ease in moving from one project to the next.
  • ProTouch grips provide extra comfort for less hand fatigue.
  • Durably constructed for a long life.Jaw Length:6.5 inches. Jaw Width 1-7/20 inches. Jaw Thickness: 1 inches.
  • 1 pair of IRWIN VISE-GRIP snap ring pliers replaces 2 for internal or external use.
  • Pliers include 4 interchangeable tips for ease in moving from 1 project to the next.
  • ProTouch grips provide extra comfort and help reduce hand fatigue while using the pliers.
Check Stock