Reviews Forged Trunnion Ball

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life. Includes two stands - enough for both heads.
Check Stock

JET JWBS-15 15-Inch Woodworking Bandsaw 1-3/4HP 1Ph 115/230V 714600

  • Toolless Adjustments: Independently adjustable, upper and lower ball bearing guides.
  • Optimum Blade Support: Rigid, four-sided guide post with rack and pinion adjustment.
  • Three Heavy-Duty Tensioning Settings: Full tension, partial tension, and full release.
  • Maximum Support and Stability: Cast iron trunnion and precision-ground cast iron table.
  • Smooth and Easy Adjusments: Cast iron handwheels and ergonomically-designed knobs.
Check Stock

Brian Tooley BTR Trunnion Kit V2 Rocker Arm Trunion LS1 LS3 4.8 5.3 5.7 6.0 6.2

  • BTR Trunnion Kit V2 Rocker Arm Trunion Kit. The all new Trunnion Kit V2 features a Trunnion with pre-installed inner race bearings..
  • The V1 kits have stood up to an enormous amount of abuse, but BTR decided to upgrade the to a pressed inner race comprised of 52100 Heat Treated Bearing Steel, over the more commonly used 8620 Carburized Steel found in our V1 kits and many OEM applications..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • Additionally, these feature a self oiling axle with priority feeding to the Trunnion itself..
  • FOR LS1/LS3/99-13 LS TRUCK STYLE ROCKERS. Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

Curt 13591 56094 40004 45030 23504 Class 3 Trailer Hitch Tow Package with 2 Inch Ball for Equinox and Terrain

  • DEPENDABLE STRENGTH. This heavy-duty ball hitch is constructed from high-strength forged steel and is rated to tow up to 17,000 pounds gross trailer....
  • VERSATILE USE. This forged trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The....
  • READY TO TOW. Hitching up your trailer is easy with this 2-inch ball mount. It features a 1-1/4-inch hole to accept a trailer hitch ball with a....
  • CORROSION-RESISTANT. For long-lasting use, this forged ball hitch is protected with a highly durable carbide black powder coat finish, easily....
  • EASY TO INSTALL. To install this class 5 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The....
Check Stock

CURT 45341 Forged Trailer Hitch Ball Mount Fits 2-Inch Receiver 17,000 lbs 1-1/4-Inch Hole 4-Inch Drop 3-Inch Rise

  • DEPENDABLE STRENGTH. This heavy-duty ball hitch is constructed from high-strength forged steel and is rated to tow up to 17,000 pounds gross trailer weight and 2,550 pounds tongue weight (limited to lowest-rated towing component).
  • VERSATILE USE. This forged trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 4-inch drop and 3-inch rise to promote level towing.
  • READY TO TOW. Hitching up your trailer is easy with this 2-inch ball mount. It features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank (trailer ball sold separately).
  • CORROSION-RESISTANT. For long-lasting use, this forged ball hitch is protected with a highly durable carbide black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this class 5 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

CURT 45340 Forged Trailer Hitch Ball Mount Fits 2-Inch Receiver 17,000 lbs 1-1/4-Inch Hole 2-In Drop 1-Inch Rise Carbide Black Powder Coat

  • DEPENDABLE STRENGTH. This heavy-duty ball hitch is constructed from high-strength forged steel and is rated to tow up to 17,000 pounds gross trailer weight and 2,550 pounds tongue weight (limited to lowest-rated towing component).
  • VERSATILE USE. This forged trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch drop and 1-inch rise to promote level towing.
  • READY TO TOW. Hitching up your trailer is easy with this 2-inch ball mount. It features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank (trailer ball sold separately).
  • CORROSION-RESISTANT. For long-lasting use, this forged ball hitch is protected with a highly durable carbide black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this class 5 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

CURT 45342 Forged Trailer Hitch Ball Mount Fits 2-Inch Receiver 17,000 lbs 1-1/4-Inch Hole 6-Inch Drop 5-Inch Rise Carbide Black Powder Coat

  • DEPENDABLE STRENGTH. This heavy-duty ball hitch is constructed from high-strength forged steel and is rated to tow up to 17,000 pounds gross trailer weight and 2,550 pounds tongue weight (limited to lowest-rated towing component).
  • VERSATILE USE. This forged trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 6-inch drop and 5-inch rise to promote level towing.
  • READY TO TOW. Hitching up your trailer is easy with this 2-inch ball mount. It features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank (trailer ball sold separately).
  • CORROSION-RESISTANT. For long-lasting use, this forged ball hitch is protected with a highly durable carbide black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this class 5 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

MYCAN Trailer Hitch Ball Mount Forged Solid Steel Fits 2 1/2' Receiver Hitch Class 5 Hitch Ball Mount Towing 2' Drop, 1/2' Rise 20,000 lbs 1-1/4' Hole Commercial Duty MCFT252

  • Heavy Duty Forged Steel: MYCAN trailer hitch ball mount is constructed from high-strength solid forged steel and this hitch ball mount is rated to tow up to 20,000 pounds gross trailer weight and 2,700 pounds tongue weight (limited to lowest-rated towing component).
  • 2 Inch Drop and 1/2 Inch Rise: MYCAN Towing ball mounts comes with a 2-1/2-inch x 2-1/2-inch shank to fit virtually any industry-standard 2-1/2-inch trailer hitch receiver. The tow ball mount also has a 4-inch drop and 2-1/2-inch rise to promote level towing.
  • 2 1/2 Receiver Hitch: Hitching up your trailer is easy with this 2 1/2 inch ball mount. MYCAN forged trailer hitch ball mount features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank.
  • Corrosion-Resistant: For long-lasting use, this trailer hitch ball mount 2 1/2 inch is with highly durable carbide black powder coat finish, solid trailer hitch ball mount easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • Easy to Install: To install this class 5 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2 1/2 inch trialer hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin.
Check Stock

Iron Cross (COBRA Securities Book 20)

  • Forged Construction-A new 5-step forged body is crafted to deliver the softest feel while a hollow cavity provides added distance and forgiveness.
  • Pwrshell Face Design-A forged face cup design increases ball speed across a wider area on the face.
  • Hollow Body with Foam Insert-The Hollow body is injected with a flexible foam that promotes an elastic rebound effect for powerful ball speed.
  • Tungsten Weighting-A heavy tungsten toe weight perfectly positions the CG behind the hitting zone for pure feel with added forgiveness.
  • CNC Milled Face and Grooves-CNC Milling produces more accurate groove shapes to optimize spin and control for improved stopping power into the green.
Check Stock

Callaway Epic Forged Iron (Left Hand, Sand Wedge , 56 Degrees, Graphite - SteelFiber, Regular Flex)

  • Epic Forged Irons are an ultra-premium, stunningly beautiful iron, developed from precision engineering and meticulous craftsmanship for incredible forged performance..
  • For the first time ever in a forged iron, we've implemented our Suspended Tungsten Core. We've suspended the tungsten weight using our Urethane Microspheres for controlled launch and distance..
  • Our renowned 360 Face Cup employs a shallow, flexible rim around the perimeter of the face that flexes and releases at impact to promote fast ball speed..
  • To provide spin and control in the mid and long irons, we've applied a new VFT pattern which promotes consistent ball speed and spin rates..
  • To complete the performance package, Epic Forged is available in stock Aerotech Steelfiber FC and Mitsubishi Tensei AV Silver Shaft options, and Golf Pride Tour Velvet Grips..
Check Stock

Cobra Golf 2022 King Forged Tec One Length Iron Set (Men's, Right Hand, KBS $ Taper Lite 105-120, Stiff Flex, 5-GW)

  • Forged Construction-A new 5-step forged body is crafted to deliver the softest feel while a hollow cavity provides added distance and forgiveness.
  • Pwrshell Face Design-A forged face cup design increases ball speed across a wider area on the face.
  • Hollow Body with Foam Insert-The Hollow body is injected with a flexible foam that promotes an elastic rebound effect for powerful ball speed.
  • Tungsten Weighting-A heavy tungsten toe weight perfectly positions the CG behind the hitting zone for pure feel with added forgiveness.
  • One Length Reduces as many variables as possible by promoting one consistent setup, ball position and swing through the set.
  • The result is more accuracy, more consistency and improved distance.
Check Stock

Cobra Golf 2022 King Forged Tec One Length Iron Set (Men's, Right Hand, KBS $ Taper Lite 105-120, Reg Flex, 5-GW)

  • Forged Construction-A new 5-step forged body is crafted to deliver the softest feel while a hollow cavity provides added distance and forgiveness.
  • Pwrshell Face Design-A forged face cup design increases ball speed across a wider area on the face.
  • Hollow Body with Foam Insert-The Hollow body is injected with a flexible foam that promotes an elastic rebound effect for powerful ball speed.
  • Tungsten Weighting-A heavy tungsten toe weight perfectly positions the CG behind the hitting zone for pure feel with added forgiveness.
  • One Length Reduces as many variables as possible by promoting one consistent setup, ball position and swing through the set.
  • The result is more accuracy, more consistency and improved distance.
Check Stock

Powerbuilt 648468 Tie Rod and Ball Joint Separator Silver 15/16 in.

  • For separating ball joint from steering knuckle.
  • Drop-forged, heat-treated alloy steel wedge tool.
  • Separates ball joint from steering knuckle.
Check Stock