Reviews Forged Steel Check Valves

Stainless Steel SS316 NPT 2 Swing Check Valve WOG 200 PSI PN16 CF8M

  • Body Material:Stainless Steel 316,200PSI/PN16,ANSI B1.20.1.
  • Working Pressure 200 WOG,Port Types:Female x Female threaded.
  • Temperature range: -60 to 450 degree Fahrenheit,Suitable for full range of liquids and gas.
  • Check valves are used to help direct flow in one direction. The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols..
  • Swing check valves are for horizontal use only. When fluid pushes on the stopper in the correct direction, it will "swing" open to allow flow. If flow moves in the opposite direction, it will swing shut. The check valve cannot be used in vertical applications as gravity may affect the function of the swinging motion..
Check Stock

DAN SPEED S316 Stainless Steel Vertical Check Valve,Spring Loaded In-line Low Cracking Pressure 2 inch

  • Body Material:Stainless Steel SUS/SS316,Cracking Pressure:4.5 psi.
  • Working Temperature:-51°C to 232°C (-60°F to 450°F),Seals:NBR.
  • Max Pressure:1000 Psi For Water,Oil,Gas (WOG1000),Port Types:BSPP Female x BSPP Female.
  • Vertical check valves may be used for any application. They utilize a spring system which shuts the Disc closed when there is not enough pressure to hold it open by the operating fluid. Fluid pressure in the backwards direction will cause the valve to close to prevent backflow.
  • Check valves are used to help direct flow in one direction.The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols.
Check Stock

Kohler Part GP876851 (4 PACK)

  • Includes valve body, pressure balance cartridge, rough-in guide and mud guard.
  • 1/2" Universal NPT & direct sweat inlets & outlets, with stops.
  • Service stops include integral check valves.
  • 5. 0 gpm (18. 9 l/min) maximum flow rate at 45 psi.
  • Single lever design cycles from off through cold to hot.
  • Provides temperature regulation and automatic anti-scald protection.
  • One piece cartridge design simplifies installation and maintenance.
  • Adjustable high temperature limit stop to control maximum water temperature.
  • Requires valve trim to complete installation (sold separately).
  • Forged De-zincification Resistant Brass body provides long term reliability and resistance to aggressive water conditions.
Check Stock

Evike All Purpose Silicone Lubricant Oil Spray for Airsoft Firearm - 50ml Small Hand Sized Can - 44040

  • Application: For General Airsoft Maintenance and lubrication for Gears, Seals, O-Rings, Plastic Parts, and more.
  • For ALL Airsoft guns and real-steel hand guns.
  • Prevent Jamming and reduce wear and tear and enables smooth operation.
  • Enhance your gun's performance, longevity, accuracy, and bb feeding.
  • Inflate air seal o-rings on valves with dried o-ring. Check for defective o-ring....
  • For AEG & GBB: Spray into magazine bb chamber periodically to prevent dust build-up == For Valves: Spray into gas-in and gas-out valves to check for....
Check Stock

Invincible Marine Fuel Line Connector, Mercury Female, 3-Piece, Multi, One Size (BR53210)

  • Made using the highest quality components.
  • The most trusted name in marine accessories and equipment.
  • This connector fits 5/16-inch or 3/8-inch fuel lines, includes spring loaded double check valves and has stainless steel hose clamps.
  • BR53210 Mercury Fitting 3-piece Female Tank Cast Aluminum, ¼-inch NPT.
  • This fuel connector has been tested in extreme climates and is alcohol resistant.
Check Stock

Prox Racing Parts 28.2423-1 Titanium Replacement Exhaust Valve

  • Fits: Yamaha YZ 450 F 2003-2009, WR 450 F 2003-2013, YFZ 450 2004-2009, YFZ 450 R 2009-2013.
  • ProX titanium valves are forged in one piece for extra strength and greater durability than OEM Titanium Valves.
  • Uses a special Ti3Al alloy for better performance under high temperatures.
  • CrN coating for extra hardness and less friction between valves and guides.
Check Stock

Victor 0382-0093 315FC 300 Series \VanGuard\ Heavy Duty Torch Handle, 9\ Length

  • Gas Service: Works with all fuel gases (pressure restrictions for different gases).
  • Built in flashback arrestors with no need for accessory flash arrestors.
  • Built in reverse flow check valves with no need for accessory check valves.
  • Features Victor traditional threaded assemblies for economical repair if service is necessary.
Check Stock

KUNTEC Victor Style Cutting Torch CA1350 & 100FC Acetylene Oxygen Welding Cutting Torch Set

  • 90 degree head For use with multiple gas types: Oxy-Acetylene, Propane, Butane, Natural and LP Gases, and Propane.
  • Brass coupling nut & double o-ring tapered seal gives quick gas-tight seal without a tightening wrench..
  • Connection: B fitting (9/16" - 18), 1pc 3#101 cutting nozzle,built in reverse flow check valves no need for accessory check valves.
  • Constructed with high strength alloy, heavy duty stainless steel and durable brass.
  • Package includes: 1 set of torch handle, 1 set of cutting attachment, 1 piece cutting tip.
Check Stock

SÜA Heavy Duty Oxy-Fuel Torch Compatible with Harris with Check Valves + Cutting Tip (Acetylene)

  • Die Forged Brass Heavy Duty Torch Compatible with Harris. Torch handle compatible with E-43, E2-43, E3-43 and B-43-N Mixers..
  • Uses Series 6290 Cutting Tips Compatible with Harris.
  • Included 6290-1 Acetylene Tip can Cut up to 3/4" (Thicker cuts can be achieved with additional higher number tips).
  • Includes Check valves for additional safety - Use of flashback arrestors is always recommended..
  • Assembled Handle + Cutting Attachment Total Length: 18" - Total Weight with Cutting Tip: 3 Lb - 6Oz.
Check Stock

8MILELAKE Cutting Torch Oxy/Acetylene Welding Kit, Medium Duty Oxygen/Acetylene Cutting, Victor Style CA1350 cutting attachment, 100FC torch handle

  • Cutting torch and handle are ready for multiple gas options.
  • Oxy-Acetylene, Propane, Butane, Natural and LP Gases, and Propane.
  • Connection: B fitting (9/16" - 18), 1pc 3#101 cutting nozzle,built in reverse flow check valves no need for accessory check valves.
  • High quality medium duty three piece torch kit, CA1350 cutting attachment, 100FC torch handle..
  • Constructed with high strength alloy, heavy duty stainless steel and durable brass.
  • Package includes: 1 set of torch handle, 1 set of cutting attachment, 1 piece cutting tip..
Check Stock

uxcell Nickel-Plated Copper One Way Air Check Valve G 1/4 Female Threaded Full Port Check Valve 2Pcs

  • Function: the check valves are applicable for fluid systems to prevent countercurrent liquids, or for pneumatic systems to prevent reverse flow of compressed air.
  • Material and size: the one way check valves are made of PVDF, sturdy, wear-resistant and durable for long-term use.
  • Each check valve measures 6.3 mm/ 1/4 inches, the total length is 38 mm/ 1.50 inches.
  • Features: the pipe port of the check valve is designed with a pagoda-shaped card slot, non-slip and non-toxic, with good airtightness and good adsorption performance.
  • Easy to install: the non-return check valve is easy to install, convenient for you to unscrew and replace.
  • Application: the non-return check valves are widely applied for automotive parts, machinery industry, household appliances, agriculture, etc..
Check Stock

SÜA - Medium Duty Oxy-Fuel Torch with Check Valves, Cutting, Heating and Welding Tips (Acetylene) - Compatible with Victor

  • Die Forged Brass Medium Duty Torch Compatible with Victor Series 100 Torches.
  • Uses Series "3" Cutting Tips (Small Tips) and comptible with Victor Series 100 Welding and Heating Tips..
  • Included Size "2" Acetylene or Propane Tip. Can Cut up to 1" (Thicker or Thinner cuts can be achieved with additional number tips - See table in picture Nº: 5).
  • Select from the menu between Acetylene or Propane and Cutting, Welding and Heating Tips options..
  • Includes Check valves for additional safety - Use of flashback arrestors is always recommended. Assembled Handle + Cutting Attachment Total Length: 17" - Total Weight with Cutting Tip: 1 Lb - 14Oz.
Check Stock

PVC True Union Check Valve 1’’ Slip Swing Full Port Utility Check Valve Sch80 Socket Pool Ball Check Valve for Backflow Prevention

  • 【PVC Ball Check Valve】Schedule 80 PVC ball check valves have a spherical ball inside the valve body which works as a check to allow flow in one direction and close off to prevent back-flow..
  • 【INSTALLATION TIP】PVC union check valves are designed for VERTICAL installations, MUST be used in an upflow position to work properly. Check valves MUST be installed with the valve's flow arrow pointing in the direction of the flow. Do not install valve upside down.（NOTE: NO SPRING).
  • 【PVC Union Check Valve】True union check valve, can be taken apart for cleaning, allows for easy removal without breaking down the piping connection..
  • 【Material】1'' Slip check valve made of PVC material, O-ring with EPDM material, low-temperature-resistant, impact-resistance, ultraviolet-resistance, rust-resistance. Fits for Schedule 80 1 Inch Pipe..
  • 【Application】PVC Swing Check Valve 1’’(DN25) - Non-return or "one way" valve is ideal for flow control, such as commercial plumbing, aquariums, irrigation, swimming pools, water parks and OEM applications..
Check Stock