Reviews Forged Fitting

SÜA Oxygen Regulator Welding Gas Gauges

  • CGA-540 Inlet Fitting, (Connection to Tank).
  • 9/16" - 18 RH Type B-B Outlet Fitting, (Connection to Hose).
  • Max Inlet Pressure: 3000 psi - Delivery Pressure Range: 0-145 psi.
  • Medium to Heavy Duty Regulators - Body: Forged brass, Bonnet: Powder Coated, UV resistant Code Color Composite Knob.
  • ***READ THIS BEFORE YOU BUY*** Please check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and Hoses..
Check Stock

findmall CGA 540 Oxygen Regulator for Welding Gas Gauge 145PSI Delivery Range

  • Durable Material: The regulator is made of Forged brass, durable and reliable to use. (Random delivery in blue and green).
  • Dimension: 9/16Inch - 18 LH type B-B outlet fitting connect to hose..
  • Parameter: Max inlet pressure 3000psi, delivery pressure 0-145psi..
  • Safety: It can accurately debug pressure, safe and practical..
  • Application: 9/16Inch - 18 LH type B-B outlet fitting connect to hose, accurate control of oxygen flow during gas welding..
Check Stock

Brute Force U-Joint

  • Forged high quality alloy steel cross is case hardened to provide good wear resistance and maximum service life. Pre-installed grease fitting in the cross saves time, prevents installation damage and allows for easy U-Joint maintenance..
  • Forged high strength steel cups are case hardened for strength and durability. Cup face and outer diameter are precision ground to provide precise fit, lock up and balance ability..
  • High carbon steel needle bearings are through hardened and precision ground using a optimized crowning profile for maximum life and load carrying capacity..
  • Seals are made out of high quality nitrile rubber for optimal grease retention and contaminant exclusion. Multi-lip seal is pliable, yet tough and tear resistant..
  • All U-Joints are pre-lubricated with a premium, high temperature grease that performs well in a wide temperature range and provides a long service life..
Check Stock

Brute Force U-Joint

  • Forged high quality alloy steel cross is case hardened to provide good wear resistance and maximum service life. Pre-installed grease fitting in the cross saves time, prevents installation damage and allows for easy U-Joint maintenance..
  • Forged high strength steel cups are case hardened for strength and durability. Cup face and outer diameter are precision ground to provide precise fit, lock up and balance ability..
  • High carbon steel needle bearings are through hardened and precision ground using a optimized crowning profile for maximum life and load carrying capacity..
  • Seals are made out of high quality nitrile rubber for optimal grease retention and contaminant exclusion. Multi-lip seal is pliable, yet tough and tear resistant..
  • All U-Joints are pre-lubricated with a premium, high temperature grease that performs well in a wide temperature range and provides a long service life..
Check Stock

Shark Industrial Premium No-lead brass dishwasher swivel connector elbow fitting 3/8" comp x 3/4" FHT

  • One lead-free brass swivel connector elbow fitting servering as adapter to attach to dishwasher hose with 3/8" comp connection and connect to dishwasher that has 3/4" female garden hose thread connection.
  • BURST PROOF - Designed to last, our connector fitting is made of solid forged lead-free brass with rubber washer for seamless connection to dishwasher.
  • CERTIFICATIONS - Our fitting is certified by UPC,WRAS,IAPMO Lead Free, RoHS.
  • EASY FIT - the elbow fits dishwasher with 3/4" FGH(Female Garden Hose) connection.
  • MONEY BACK GUARANTEE - We offer 100% money back gurrantee with no questions asked. This great product also comes with 10-year warranty for quality related issues because we are so confident about our product quality. Rest assured for your purchases..
Check Stock

MASTERCOOL HVAC Digital Manifold Complete Kit with 72 Standard Hoses MSC-99772-A

  • HIGH QUALITY: High quality rubber make the AC Diagnostic Manifold Gauge Sets Shockproof and shatter-resistant. Aluminum forged MANIFOLD body with (3)....
  • GAUGE PRESSURE RANGE: Burst pressure: 600-3000Psi working/bursting pressure. Blue gauge (low): 0-350 PSI.
  • QUICK DISCONNECT COUPLERS: High & Low pressure fittings included.
  • Each coupler have a shut off valve to prevent loss of refrigerant.
  • CONTENTS: Include 3-Colored 5 Ft/60 Inch Red/blue Charging Hoses, 1/4 Sae fitting on both sides for Red & blue, 1/2 Acme fitting on both sides for....
  • APPLICATION: R134A Professional Manifold Gauge Set. Ideal for R134A, R404A, R407 refrigerants.
  • Designed for AC Freon charging, evacuation (vacuum),....
Check Stock

3/16\ Cable x 1-1/2\ Diameter Stainless Steel Swivel Eye Block

  • ✓ Durable Corrosion-Resistant E-coat Finish.
  • ✓ Accept Both Wire and Synthetic Ropes.
  • ✓ BREAK POINT IS 8 Tons 17,600 LBs, UNMATCHABLE QUALITY BY ULTRANGER.
Check Stock

Satco 92-406 Reducer, Color

  • Boss fitting hammer union threaded 206 series.
  • Runs air, water, oil or gas up to 2,000 psi NSCWP (nonshock cold working pressure).
Check Stock

uxcell M15 0.035T Capacity Single Swivel Rope Pulley Roller Block 2 Pcs

  • Available with bronze self-lubricating bushings.
Check Stock

TRX 400EX (1999-2014) FORGED BILLET ATV REAR AXLE BEARING CARRIER

  • Application: (99-2014)TRX 400EX, (1986-1989) TRX 250R.
  • 6061-T6 AIRCRAFT GRADE FORGED BILLET ALUMINUM.
  • Fully assembled including the axle carrier.
  • Double wide bearings, spacer and two new seals and a grease fitting..
  • Direct OEM replacement part that is beautifully machined to spec and ready to install.
Check Stock

Ranger (10 Tons 22,000 LBs) Commercial Reliability Snatch Block with Grease Fitting by Ultranger

  • ✓ Durable Corrosion-Resistant E-coat Finish.
  • ✓ Accept Both Wire and Synthetic Ropes.
  • ✓ BREAK POINT IS 10 Tons 22,000 LBs, WLL 8 Tons 17,636 LBs.
Check Stock

WISEPRO Drop Forged MIG Welding Pliers,8 Inch Multi-Purpose Welding Plier for Cutting Welding Wires,Hammering and Removing Spatters

  • Durable Forged Carbon Steel-the MIG pliers are made from premium forged carbon steel which promotes hardness,toughness and long-lasting performance..
  • Extra Sharp Cutting Edge-we use CNC machines to guarantee the precision of welding pliers in manufacturing processes and this is the reason why our welding tools are sharp and durable..
  • Comfortable Grip Handles-designed with a soft handle and a loading spring can distribute the fatique generating from long period use and improve fit with hands..
  • Multifunction-the welding tools can be used for cutting wires,removing and installing tips and nozzles, cleaning splatter,drawing out wires and hammering nails..
  • Suitable Crowd and Applicable Place-the MIG welding tools are fitting for professional welders and amateurs.Ideal for workshop,factory,garage,farm and home..
Check Stock

Goldblatt - G06993 GOLDBLATT Brick Hammer, 20 Oz Bricklayers Masonry Hammer, 12-Inch Hickory Wood Handle

  • 【FORGED STEEL HEAD】- Made of high grade forged steel, the brick hammer features strong wear-resistant, great hardness and strength to ensure durability. Polished finish and sand blasting treatment on the surface, balances the function and good-looking.
  • 【HAMMER FEATURE】Larger hammer face and wider blade are perfect for tackling tough jobs.
  • 【GENUINE HICKORY HANDLE】12 inch wood handle, features large contoured fitting well in hand, ensures comfort and easy control, reduce the force during use. The hardness on striking face and flat tip is 45-60HRC, meet your most job needs.
  • 【WIDE APPLICATION】Perfect for striking, shaping, breaking or chipping brick, concrete or stone in masonry construction, prospecting, mining and geological research. Suitable for stone masons, brick layers, geologists, quarry workers, carpenters and DIYers.
  • 【BRAND STORY】Goldblatt delivers high quality tools since 1885. Goldblatt designs and distributes trendy tools in the masonry, concrete, drywall, tile and paint tool around the world. If you have any request, we are always here to help you.
Check Stock