Reviews Ford Super Duty Front Axle Dust Seals

For 10-22 Ford F250 17 Inch Silver Steel Rim - OE Direct Replacement - Road Ready Truck Wheel

  • Replacement for 1999-2004 Ford F-250 / Ford F-350 Super Duty (4x4.
  • Both (2) Brand New Front Driver & Passenger Side Axle w/U-Joint for 1999-2004 F-250/F-350 35 Spline Dana 60 Axle.
  • Both (2) Front Wheel Bearing And Hub Assembly Set "Coarse Threads" - 515020.
  • FITS DANA 60 4x4 Single Rear Wheel Models Only - Coarse Hub Threads and ABS.
Check Stock

Timken 710596 Axle Shaft Seal

  • APPLICATION: Compatible with 1998-2004 Ford F-250 F-350 F-450 and F-550 4X4s having the vacuum-operated front axle..
  • FUNCTION: This tool is necessarily if you want your vacuum locking hubs to work after replacing the axle seals since it prevents front hub vacuum leaks that would cause the 4WD not engage and covers in oil to prevent corrosion..
  • EASY TO USE: This tool allows you to install and insert the axle shaft seal of your vehicle in its proper depth, distance and position by driving it in with a rubber mallet or hammer onto the wheel knuckle assembly..
  • MATERIAL: Made of high quality steel, the surface with black oxide finish ensures great strength and durability while resisting rust and corrosion( It is normal that there are iron filings in the groove, if you mind, please buy it carefully )..
  • REPLACES PART# 6695: Vacuum seals delicately works with the axle shaft and this axle shaft seal tool is produced to ensure proper installation to the wheel knuckle assembly, prevents damages on the new seal, saves time and a lot easier..
Check Stock

Auto Locking 4WD Hub Link - Fits Front Left or Right - Replaces 1C3Z-3B396-CB - Compatible with Ford, Lincoln Vehicles - 1999-2004 F250, F350, F450, F550, Expedition, Navigator - 1C3Z3B396CB

  • Replacement 4X4 4WD Auto Locking Hubs - Located on the front wheel hubs the 4WD actuators control power transferred from the axle assembly to the front wheels. This 4x4 locking hub fits both right and left front axles on your F250, F350, F450, F550 Super Duty and Expedition, Excursion, and Navigator..
  • Compatible Replacement for Ford & Lincoln - Fits both front left or front right wheel locking hubs on F250, F350, F450, F550 Super Duty 1999, 2000, 2001, 2002, 2003, 2004 - Excursion 2000 -2005 - Expedition and Navigator 2001-2002 - Includes model years 99, 00, 01, 02, 03, 04, 05.
  • Replaces Part# - Replaces part number 1C3Z-3B396-CB and 1C3Z3B396CB - While this is a not a genuine OEM part, it is a direct replacement for the factory 4WD locking hubs on the driver or passenger side of your F250, F350, F450, F550 Super Duty and Expedition, Excursion, and Navigator..
  • OEM Fit, Quality, Finish - This 4x4 front axle actuator is a direct replacement for the factory actuator. Each actuator comes pre-lubed for easy installation on the wheel hub and axle assembly. Save hundreds off dealer prices and restore the function of your 4x4 system with a new locking hub..
  • Lifetime Warranty - The 4WD Auto Locking Hubs comes complete with a lifetime warranty. If the locking ....
Check Stock

Bosch Automotive BSD1680 SevereDuty 1680 Severe Duty Disc Brake Pad

  • Bosch Severe Duty Semi-Metallic brake pads use the latest technology in friction for best in class performance, quiet operation, and long life.
  • Severe Duty pads are made for vehicles subject to constant stop-and-go operation or that carry heavy payloads.
  • OE-style multilayer shims, slots, and chamfers where specified.
  • Engineered, tested, and manufactured in North America.
  • Set includes pads for 1 axle 2 wheels, synthetic lube, and hardware as applicable.
  • pads come boxed with a paper inner wrap for added protection.
  • FRONT: FORD:2013-16 F-250 Super Duty, 2013-16 F-350 Super Duty, 2013-16 F-450 Super Duty.
Check Stock

E-cowlboy 6695 Axle Shaft Seal Installer for Ford 1998-2004 F250 F350 F450 F550

  • FITMENT INFORMATION - Works on 1998-2004 Ford F-250 F-350 F-450 and F-550 4X4s having the vacuum-operated front axle..
  • UNDAMAGED AND PREVENT FROM LEAKING - Ensure the seal is installed properly and undamaged, both onto the axle shaft and into the wheel knuckle,....
  • SUPERIOR QUALITY - Solid one piece steel construction with black oxide finish resisting rust and impact, ensures reliable long-term service..
  • A MUST HAVE TOOL - Must have for seal replacement on your Ford Super-duty, makes final assembly simple and quick and accurate..
  • 100% SATISFACTION GUARANTEE - If you're not 100% satisfied with our tool, simply return it for a full refund in 30 days, no questions asked money back....
Check Stock

Ranch Hand FBF115BLR Legend Front Bumper for Ford HD

  • Retains Factory Tow Hooks And Fog Lights.
Check Stock

BOSCH BP1680 QuietCast Premium Semi-Metallic Disc Brake Pad Set - Compatible With Select Ford F-250, F-350 Super Duty, F-450 Super Duty; FRONT

  • The Bosch QuietCast line draws on over 77 years of OE braking excellence.
  • promising the highest quality performance, industry-leading strength and durability, and exclusive innovations including Molded Shim Technology (MST).
  • The industry's best pre-attached OE style multilayer rubber core shims ensure the highest quality bond between rubber and steel, resulting in lower noise, increased strength, and corrosion resistance.
  • Rigorously formulated and tested by Bosch's engineers, the Semi-Metallic friction material in the QuietCast line is meticulously engineered to achieve superior performance, exceptional stopping power, and quiet operation with low dust.
  • Powder-coated backing plate prevents rust and corrosion for increased product life of the brake pad.
  • Slots and chamfers ensure premium quality, fit, and function.
  • Set includes pads for 1 axle (2 wheels), hardware kit (where available), and synthetic lubricant for reduced resistance on sliding contact points.
  • FRONT: Compatible with select vehicles (Note: vehicle trim level may affect fitment - verify specific vehicle fitment details with fit checker above): FORD: 2013-17 F-250 Super Duty, 2013-17 F-350 Super Duty, 2013-16 F-450 Super Duty.
Check Stock

Fuel Pump Assembly for Ford F-150 F-250 F-350 1990-1997 F Super Duty F53 with 18 Gallon Steel Tank

  • YHTAUTO Fuel Pump Module Meets OEM Specifications, Direct Replacement to Original Parts.
  • Ford F-150 5.0L/5.8L 1990-1996, 4.9L 1990-1997---【for 18 Gallon After Axle Steel Tank】.
  • Fits Ford F-250 4.9L/5.0L/5.8L/7.5L 1990-1996.
  • F-250 HD 5.8L/7.5L 1997---【for 18 Gallon After Axle Steel Tank】.
  • Fits Ford F-350 4.9L 1990-1996, 5.0L 1990-1993 1995-1998, 5.8L/7.5L 1990-1997---【for 18 Gallon After Axle Steel Tank】.
  • Reference Number: SP2007H, F6TZ9A407CC, PFB3, F4TZ9A407C, F6TZ9A407CA.
Check Stock

Detroit Axle - 4WD Front Wheel Hub Bearings + Ball Joints + Tie Rods Suspension Kit Replacement for 2000 2001 2002 2003 2004 Ford F-250 F-350 Super Duty - 12pc Set

  • Replacement for 2011-2014 Ford F-250 Super Duty (4x4.
  • Replacement for 2011-2014 Ford F-350 Super Duty (4x4.
  • Built to strict quality control standards.
  • Undergo impact, wear, and fatigue testing to help ensure quality and durability.
Check Stock

Yukon Gear & Axle (YMS8835S) Axle Seal for Differential Bearing, for 1559 OR 6408 bearing, NOT COARSE spline 12T

  • ...atible Replacement for Ford Vehicles - 2000, 2001 , 2002, 2003, 2004 Excursion 4x4 | 98, 99, 00, 01, 02, 03, 04 F250 | 98, 99, 00, 01, 02, 03, 04 F350 | 98, 99, 00, 01, 02, 03, 04 F450 | 1998, 1999, 2000, 2001, 2002, 2003, 2004 F550 |. Replacement of the axle shaft seal is necessary after removal when servicing the front-end parts like the u-joints to avoid having issues when engaging 4WD. Installation can be tricky and with a proper tool like this, it will be perfect everytime..
  • Replaces Part# 6695 commonly found on popular vehicles including year models 1998, 1999, 2000, 2001, 2002, 2003, 2004. This axle shaft seal tool is constructed with high quality steel, black finished and designed with handle and the correct ridges compatible with Ford vehicles. This is applicable to your Excursion 4x4, F-250, F-350, F450 and F-550 vehicles only..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Vacuum seals delicately works with the axle shaft and this axle shaft seal tool is produced to ensure proper installation to the wheel knuckle assembly, prevents damages on the new seal, saves time and a lot easier..
  • Lifetime Warranty - This vacuum seal installer co....
Check Stock

Orion Motor Tech 8x170 Wheel Spacers, 2" Blue Wheel Spacers with M14x2 Studs Compatible with Ford Super Duty F250 F350 & Excursion 1999-2014, 130mm Wheel Spacer Kit, Set of 4

  • SAFE AND SECURE: This Orion Motor Tech 8x6.7 (8x170) automotive wheel spacer kit improves the cornering, stability, handling, and control of your vehicle by adding 4 inches to its axle track.
  • PREMIUM MATERIAL: These wheel adapters are made from solid blocks of T6 aircraft-grade aluminum to keep them lightweight but highly durable and strong.
  • the 32 Dacromet-coated M14x2 bolts included are 7-10 times more corrosion resistant than the competition.
  • SUPERIOR DESIGN: Unique slots on the rear face of these car wheel spacers allow easier removal, reduce damage during use, and give you a longer service life.
  • WIDE COMPATIBILITY: This wheel adapter set is compatible with Ford Excursion and Super Duty F series trucks from 1999 to 2014.
  • see above for the complete fitment list of Ford Excursion, Ford Super Duty F250 & F350, 1999 Ford F250, and more!.
  • 1 YEAR WARRANTY: Increase your axle track and stability today with your peace of mind assured by Orion Motor Tech's strong 2 year warranty and usual friendly customer service.
Check Stock

Power Stop K1906-36 Front & Rear Z36 Truck and Tow Brake Kit

  • Proprietary carbon-fiber ceramic materials enhance the strength of a typical ceramic brake pad compound to handle heavier loads.
  • Low dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE.
  • Drilled & Slotted performance rotors for maximum cooling. Rotor Type: Front: Vented, Rear: Vented.
  • Includes stainless steel installation hardware and high temperature ceramic brake lubricant.
Check Stock

Detroit Axle - 4x4 SRW Front Wheel Hub and Bearings + Ball Joints Outer Tie Rods Kit Replacement for 2005-2010 Ford F-250 F-350 SD - 11pc Set

  • Replacement for 4WD Single Rear Wheel Models w/ ABS (Excludes Extended Axle).
  • Replacement for 2005-2010 Ford F-250 / F-350 Super Duty.
  • Kit Includes: 2x Front Wheel Hub and Bearing Assemblies + 4x Front Ball Joints + 3x Front Outer Tie Rod End Links + 1x Tie Rod Adjusting Sleeve + 1x Front Tie Rod Drag Link.
  • Hub Specifications: Position: Front | Lugs: 8 Bolt| ABS Type: Sensor Wire| Flange Type: 4-Bolt Square.
Check Stock