Reviews Ford Camber Plates

YLDEE Magnetic Camber Caster and King Pin Gauge (Red)

  • Robust magnetic gauge mounts onto wheel/hub for quick accurate measurement of camber,castor angle kingpin inclination.
  • Camber gauge with fixed graduation from +5 to -5.
  • Adjustable caster gauge graduated +11 to -3.
  • Kingpin gauge graduated from 0 to 14 left to right.
  • Very solid, well made. Magnets are very strong, reliable and accurate! Suitable for vehicles fitted with steel wheels. To be used in conjunction with steering turntables and rear wheel level plates..
  • Supplied in tough composite carry-case. Suitable case with enough padding will protect the Camber Castor Gauge very well..
Check Stock

Yonaka Compatible with Honda Accord 2013-2017 Spec 2 Full Coilovers Suspension Shocks Springs Struts

  • Fully threaded dual tube advanced shock absorber.
  • Adjustable camber plates (3 degrees camber adjustment).
Check Stock

Tenhulzen Automotive - Digital Hands Free Camber/Caster Gauge, 0.1 Degrees Accuracy, No Turn Plates Needed!

  • Measure Camber and Caster at the track or in your garage..
  • Camber measurements accurate to within 0.1 degrees..
  • Measures Caster WITHOUT the need for expensive turn plates..
  • Digital readout can be calibrated for non-level surfaces in a matter of seconds..
Check Stock

Tenhulzen Automotive 2-Wheel Alignment Tool - All-in-one Camber/Caster/Toe Plates - Made in USA

  • All-In-One Tool Measures Camber, Caster, AND Toe!.
  • Patent Pending wheel stand-offs provide unparalleled accuracy..
  • Camber Accurate to Within 0.1 Degrees (much better than a bubble gauge)..
  • Expensive Turn Plates Are NOT Needed for Caster Measurment..
  • Detailed, Step by Step Video Instructions..
Check Stock

Longacre® 52-79505 Deluxe Toe Plates (pair)

  • Consistent results - the thicker material and deeper bend gives you more rigid plates for better accuracy with your toe measurements.
  • The Longacre deluxe toe-in plates feature a higher kick-out bottom that holds the plate against the wheel better, making them even easier to use.
  • Get the job done fast and with less stress - the built in magnets hold the tapes in place while you work, making the job easy for one person.
  • The Longacre deluxe toe-in plates are perfect for cars with high camber left front wheels, such as bump stop cars.
  • Longacre deluxe toe-in plates will help keep your race car at the front of the pack – this set includes two deluxe toe-in plates and two tire tapes.
Check Stock

Specialty Products Company 77880 Ford OE Sleeve Puller

  • Will pull both O.E. and most aftermarket camber/caster sleeves quickly and efficiently.
  • Applications: Ford: Twin I-Beam with upper and lower ball joints.
  • CAUTION: Not for use with impact wrenches (air tools).
Check Stock

Longacre® Racing 79501 Aluminum Toe-In Plates w/Magnets

  • These plates are the quickest and simplest way to check toe-in - any contact with other cars or retaining walls is likely to change the toe setting.
  • Easy to use - rest one of these plates against the tire on each side and measure toe directly using the 2 tape measures (included).
  • Get the most accurate reading - always remember to turn wheels so they are facing straight ahead on level ground and set caster and camber first.
  • The Longacre toe-in plates formed design is rigid for accuracy and stays put against the tire while the magnets hold the tape in place.
  • The dimensions of the Longacre toe-in plates are 23-1/2" x 9" and are sold as a pair with two 3/4" tapes that feature 1/32" increments.
Check Stock

Camber Gauge Digital Wheel Alignment Tool -90° to +90° Wide Range Wheel Alignment & Balancing Tools Accurate Caster Camber Gauge with Digital Display & Powerful Magnet & Positioning Bubble & Reset Key

  • 【Professional Digital Caster Camber Gauge】The camber gauge is used to measure the camber and caster angles of wheels or brake discs.Camber gauge allows you to restore the strut to original camber position after disassembling and reassembling the suspension,or to check the camber change before reinstalling. It can help you adjust camber and caster to maintain correct wheel alignment, reduce tire wear, and increase the speed of your car. It can also be used to adjust the levers of the rear wheels..
  • 【Easy-to-read Digital LCD Display & ±90° Wide Range Measurement】Wheel alignment & balancing tool is equipped with a clear digital display,allowing you to quickly read the caster and camber angles.You can check and adjust the castor and camber angles at a glance.This camber gauge also has a backlight for use in dark areas.The camber gauge has an ultra-wide measuring angle range from -90 to +90 degrees.It is suitable for wheel alignment of all vehicles,such as cars, motorcycles, trucks, vans, etc..
  • 【Powerful Magnet&Positioning Bubble Design for Accurate Measurement】There is a magnet with strong magnetic attraction at the bottom of the camber gauge,which can be easily attached to various magnetic surfaces.The magnet attached area of the ....
Check Stock

Powerbuilt Tie Rod and Ball Joint Separator Kit Ford and GM Vehicles Pitman Arms Cars Light Duty Pickup Trucks - 648630

  • Designed For Seperating Ball Joints, Tie Rods, Pitman Arms and More.
  • Complete 5 Pc. Kit Includes A Wide Variety Of Applications Over Many Makes and Models.
  • Includes Adapters For Removing Camber Adjustment Sleeves on Light Duty Ford Trucks.
  • Kit includes usage instruction with photos.
Check Stock

Longacre® 52-78290 Digital Caster Camber Gauge

  • Be confident with your setup - here's an ultra accurate digital caster / camber gauge that reads to .1º (1/10º) camber and caster as high as needed.
  • Protect your investment - the caster camber gauge comes with a magnetic adapter and padded hard carrying case to keep your gauge safe when not in use.
  • Make front-end caster and camber adjustments quickly, easily, and accurately - this digital caster camber gauge is also backlit for use in dark areas.
  • Adjusting camber can have a dramatic effect on the cornering of your car - optimum camber settings will result in more speed and ideal tire wear.
  • Built-to-last, the Longacre digital caster camber gauge is made of strong CNC machined billet aluminum.
Check Stock

Ronin Factory Set of 4 Boxlink Cleats, Tie Down Brackets, & Plates for Ford F150 F250 Raptor Combo Pack - All Hardware Included - 4 Ratchet Strap Anchor Points

  • COMBO Pack – Includes 4 Tie Down Brackets (+ hardware) & 4 Locking Cleats (also known as Ford Boxlink Cleats) – No Need to order separately, everything comes in one box..
  • FITS: Ford Trucks 2015-Present (F150, F250, F350 & Raptor) Includes 4 Steel Plates with fitting Cleats to secure on the Inside of your Truck bed for additional cargo tie-down points.
  • REST ASSURED – Includes anti-tamper, theft resistant hardware with security-drive Torx included for the plates. Extra sets of keys for the cleats included. So less chance of someone trying to remove your valuables..
  • EASY INSTALL: Instructions are included in the packaging as well as video instructions on our website..
  • QUALITY – Meets or Exceeds OEM quality of Ford Parts. Direct replacement of Ford PN FL3Z-9928408-AB & FL3Z-99000A64-B.
Check Stock

BURTON Throwback Snowboard Sz 100cm

  • Camp Seven Roots CRC Snowboard: You asked for it and we delivered. The perennial fan favorite Roots finally has an alternate camber brother! The Roots CRC (camber-rocker-camber) is a new edition to the Roots line and allows riders to choose a board with a more loose and relaxed center of the board while loaded camber in the tip and tail put the pop right where you want it. If you think you know the Roots from years past, wait until you ride the new CRC version!.
  • Profile: Camber Rocker Camber Rocker in the center to free up your contact points for catch free riding and serious float in powder, is then paired with camber in the tip and tail for explosive pop and tons of added control..
  • System APX Bindings: features of this binding are a dream come true. Full length EVA base pad. Either-Or toe strap that can be ridden toe cap style or over the forefoot. Gel insert contoured straps. Inside routed ladder straps, Aluminum 4 tooth ratchets, 15% fiber inclusion in both the baseplate and the highback, anatomically correct footbed, comfy adjustable toe ramps, full dual sided on the fly strap adjustability via cam cleats on both toe and ankle straps..
Check Stock

Traxxas Slash 2WD Chassis Pre-Roller Gray Conversion Chassis 5822

  • This is a brand new Traxxas 2WD Slash chassis..
  • It includes everything seen in the pictures.
  • - chassis, skid plates, nerf bars, battery hold down, steering linkage, fiberglass tie bar, suspension arms, shock towers, camber links, screws, owners manual, parts list, and tools..
  • Turn your Stampede, Rustler, or Bandit into a Slash with this conversion chassis.
  • Pulled from a brand new Traxxas 2WD Slash..
Check Stock