Reviews Forced Induction

Moroso 37900 0.030\ Offset Cylinder Head Dowel for Big Block Chevy

  • Fits all years Honda Civic B16, B17, B18, B20 & Acura Integra B16, B18, B20..
  • Protects your low end for High Reving VTEC or forced induction engines from deflection and distortion.
  • Includes: 1x Honda - Acura engine block girdle and 6x VTEC head adapter dowels.
  • CNC machined from aerospace-grade billet aluminum and anodized black for maximum durability.
  • Comes with detailed Installation Instructions.
Check Stock

Holley 12-170 Elec Pump, 400 Lph

  • designed for high output naturally aspirated and forced induction efi and carbureted vehicles.
  • the roller vane design pump provides fuel pressure and volume to support up to 900 efi n/a or 700 efi boosted horsepower.
  • compatible with flex fuel (e85/e90) and all types of gasoline (100% alcohol fuels may diminish fuel pump life).
  • the inlet thread is a -8 an female orb (o-ring port fitting) and the discharge is a female -6 an orb (o-ring port fitting).
  • includes fuel pump, -6 to -8 male an discharge fitting with check valve, terminal nuts & boots, instructions.
Check Stock

Innovate Motorsports 3924 MTX-L Plus (3ft. Cable) Wideband O2 Gauge Kit 39240

  • FASTER Sensor Frequency for faster O2 sensor feedback.
  • FASTER Analog Output Speed helps ensure that your ECU sees changes in air/fuel ratio as they happen.
  • ENHANCED Heater Control for superior sensor performance in forced induction and other high performance applications.
  • Large digital readout and programmable “Digital Needle” provides the functionality of a needle gauge with the pinpoint accuracy of a digital display.
Check Stock

Everlasting Comfort Deodorizing Boot Dryer - Dries in Under 80 Minutes - Shoes, Gloves, & Hats

  • Dries Most Garments in 80 Minutes or Less: Boot dryers that only use convection can take anywhere between 12 to 24 hours to dry. With ours, it uses a hybrid forced air speed drying system. Using forced air induction and a fan, it not only draws in air, it warms, then circulates it throughout your garments, resulting in dry shoes, boots, gloves, and helmets in under 80 minutes.
  • Dries Multiple Garments Simultaneously by Emitting a Steady Stream of Warm Air: Synchronize drying your ski boots, work boots, and gloves easily with our boot and glove dryer. 2 extendable and customizable back dryers are ideal for boots, helmets, and larger garments, while the 2 smaller front dryers fit gloves, soccer cleats, socks, kids footwear and clothing. Please note: Air will feel warm rather than hot to the touch.
  • Comes with Shoe and Helmet Attachments: Not all shoes are shaped or sized the same.
  • that's why we've included both shoe and helmet attachments to help you customize our drying rack to fit your needs. They're easy to attach and can be positioned in different angles to accommodate your boots, tennis shoes, and helmets simultaneously.
  • Helps Eliminate Odors: Wet, soggy footwear is a breeding ground for unwanted odors. With our shoe dryer and deodorizer, it warms....
Check Stock

Aeromotive 11186 In-Line Brushless 5.0 Gear External Fuel Pump with Mounting Feet, 1 Pack

  • Integral, external brushless controller for clean installation, cooler fuel and enhanced reliability.
  • Supports naturally aspirated engines up to 3400 HP with EFI, up to 3600 HP carbureted and forced induction up to 2600 HP with EFI and up to 2700 HP carbureted.
  • Capable of 90-psi continuous operating pressure, 150 psi peak, base plus boost.
  • EFI rated flow of 1, 700 lbs./hour at 40 psi, 13.5 Volts.
  • carb rated flow of 1, 850 lbs./hour at 9 psi, 13.5 Volts.
  • Reduced current draw at higher, EFI pressures.
  • lighter than the traditional external mount pumps.
  • extended service life in methanol and ethanol.
  • Pressure regulator not included (sold separately) - for EFI applications use regulator P/N 13134 or P/N 13110, for carbureted applications use regulator P/N 13202 or P/N 13212.
Check Stock

Honeywell TH6210U2001 T6 Pro Programmable Thermostat (Pack of 2)

  • System Application: Standard Efficient Gas Forced Air, High Efficacy Gas Forced Air, Oil Forced Air, Electric Forced Air, Hot water Fan Coil.
Check Stock

ADPOW K03 Turbo Turbocharger Compatible with Audi A4 Quattro Volkswagen Passat 1.8T B5 B6 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006

  • 1.Compatible with Audi A4 1997-2006 1.8T, Compatible with Audi A4 Quattro 1997-2005 1.8T, Compatible with Volkswagen Passat 1998-2005 1.8T. ATTENTION:Please Check fitment information on product description page below.
  • 2.Replace OEM Part number:53039880029,53039880073,53039880005.058145703L,058145703J.058145703K,078145703B,058145703NX.058145703N.058145703LX,058 145 703 J, 058 145 703L,058145703C, 058145703D,058145703E,058145703EX,058145703H,058145703JV,058145703JX.
  • 3.Turbocharger is a turbine-driven forced induction device ,Turbocharged engine can be more powerful and efficient than a naturally aspirated engine,Increase Engine Power and Torque Outpout.
  • Maintain Combustion Chamber Pressure and Fuel/Air Load.
  • 4.Constructed of Reliable Material: Cast housing with durable steel.
  • Boost engine horsepower significantly,Engineered to reduce failures.Quality tested for trouble-free performance.Quick and easy installation.
  • 5.Does NOT FIT VW Golf, Jetta, Beetle or Audi TT, While those vehicles use a similar 1.8L turbocharged engine, But different mounting points.
Check Stock

WYNNsky 10FT Vacuum Tubing Hose, 0.12'' (3MM) ID, 0.27'' (7MM) OD, High Temperature Silicone Material, -76℉ to 374℉, 60PSI Max Working Pressure Automotive Replacement Vacuum Hose

  • Application: WYNNsky vacuum hoses are quite an inexpensive and practical performance modification for most all types of vehicles..
  • Material: Manufactured from a high-grade silicone, these vacuum hoses facilitate superior temperature resistance, will last longer than rubber hoses, and won't deform, even under extreme conditions..
  • High Temperature: WYNNsky silicone vacuum hoses are ideal for cooling/heating and high-power forced induction applications. -76℉ to 374℉..
  • Hose Standard: 0.12'' (3MM) ID, 0.27'' (7MM) OD, 2MM wall thickness, 60 PSI Maximum pressure rating..
  • This silicone vacuum hose applies to general purpose air or water transportation in the engine bay, great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system..
Check Stock

NEW HOLLEY SNIPER EFI STEALTH KIT 4150 4 BBL FUEL INJECTION CONVERSION MASTER KIT,GOLD,870 CFM,COMPATIBLE WITH 4150 FLANGE STYLE MANIFOLDS

  • ...r | Max Horsepower Rating: 650 Naturally Aspirated | Model: 4150 EFI Conversion Throttle Body | Product Type: EFI | Transmission: 700R4/200R4 Ford C4/C6 TH350.
  • The Sniper Stealth 4150 EFI system from Holley features 4, 100LB/HR Fuel Injectors capable of supporting up to 650 HP naturally aspirated or 600 HP on forced induction applications. The Sniper Stealth 4150 ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! Did we mention that the Stealth 4150 also includes transmission kick down provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications..
  • Master Kits include complete fuel system with an external fuel pressure regulator preset to 58.5 PSI, 20 feet of 3/8″ Vapor Guard Fuel Hose, Fuel Pump, Filters, necessary hardware & bulkhead fitting to return fuel into the tank!.
Check Stock

Dual Action Power System Tool, Forced Dual Action Polisher Adapter Detailing Tool with 3Pcs Polishing Pads for Cordless Drill for Car Polishing, Buffing, Waxing and Compounding -DAPSTS3

  • 【Forced Dual Action Tool】Special forced dual action power system tool, combine traditional rotary pattern and dual action orbit pattern, brings you new updated rotating rail. Efficient for removing heavy and light scratches..
  • 【Beginers Friendly】The forced dual action power system tool can be easily attached onto drill tools, so you can polishing your whole car just with a drill tool in less than a half hour! You get the speed, ease and professional finish of machine work in an accessible, easy-to-use home tool..
  • 【Convenient】Just takes you little money, you will have a forced dual action polisher. Attaches to most standard drills. Recommended for use with 3/8″ corded drill that operates between 1,200 and 2,500 RPMs..
  • 【Multipurpose】This rouged, multipurpose tool allows you to safely remove oxidation, scratches, water spots and swirls, and perfectly apply polishes and waxes..
  • 【Good to Use】Whether you need to compound and remove defects, want to boost gloss by polishing, or protect your paint by waxing, this polishing tool delivers amazing results..
Check Stock

BILT HARD 80,000 BTU Forced Air Kerosene Diesel Heater, Portable Torpedo Space Heater with Thermostat Control for Outside, Jobsite, Garage, and Construction Sites, ETL Certified

  • 【High Output Heat】: This multi-fuel forced air heater provides 80,000 BTUs, heating 1,900 sq. ft. for up to 9 hours.
  • Fuel capacity: 5 gallons. Ideal for outdoor/indoor construction, as well as industrial & commercial applications. Included are temperature limit controls, a thermostat, flameout sensor, and run-time fuel gauge.
  • 【Multiple Fuel Options】: Can use different fuels to generate heat, including kerosene, diesel, home heating oil, and jet fuel (WARNING: DO NOT USE GASOLINE).
  • 【Sturdy Steel Construction】: Rugged construction allows kerosene shop heaters to be used in winter and freezing temperatures as cold as -4 F. Typical uses include construction sites, patios, factories, sporting events, utility and outbuildings, and farming functions, (barns, etc.).
  • 【Simple No Tools Assembly】: This forced air diesel heater is shipped completely assembled. multi-fuel forced air heaters to provide immediate relief from cold weather working conditions. Which is easy to convenient maintenance. CAS certification to keep you safe.
  • 【Warranty】: BILT HARD 80,000 BTU forced air kerosene heater is guaranteed for 1 year. We aim for quality followed up with quality customer service directly provided by the manufacturer. We offer free exchange for any qual....
Check Stock

BILT HARD 85,000 BTU Forced Air Kerosene Diesel Heater, Portable Torpedo Space Heater with Thermostat Control for Outside, Jobsite, Garage, and Construction Sites, CSA Certified

  • 【High Output Heat】: 29.6" × 12" × 16.4"(L x W x H). This multi-fuel forced air heater provides 85,000 BTUs, heating 2,200 sq. ft. for up to 8 hours.
  • Fuel capacity: 5 gallons. Ideal for outdoor/indoor construction, as well as industrial & commercial applications. It Includes self-diagnostics, a thermostat, an indicator lamp, and cord wrap..
  • 【Multiple Fuel Options】: Kerosene forced air heaters are CSA certified for multi-fuel use with these fuel types: kerosene, filtered diesel #1 and #2, fuel oil #1 and #2, or even jet A fuel (JP8). However, K1 Kerosene is the manufacturer's recommended fuel for optimal, cleaner burns and long-lasting product life..
  • 【Sturdy Steel Construction】: Rugged construction allows kerosene shop heaters to be used in winter. Typical uses include construction sites, patios, factories, sporting events, utility and outbuildings, and farming functions, (barns, etc)..
  • 【Requires Little to No Assembly】: This torpedo heater diesel is easy to assemble and has convenient maintenance. multi-fuel forced air heaters provide immediate relief from cold weather working conditions. Which is easy to convenient maintenance..
  • 【Warranty】: BILT HARD forced air kerosene heater is guaranteed for 1 year. We aim for quality followed up ....
Check Stock

XXLL Red Kerosene Heaters for Indoor Use, Non Electric Heater, Kerosene Stove Heater with Stove Bag Lightweight Portable Stainless Steel Oil Heater Glass Burner for Indoor Camping - 4.6L

  • 【High Output Heat】: 29.6" × 12" × 16.4"(L x W x H). This multi-fuel forced air heater provides 85,000 BTUs, heating 2,200 sq. ft. for up to 8 hours.
  • Fuel capacity: 5 gallons. Ideal for outdoor/indoor construction, as well as industrial & commercial applications. It Includes self-diagnostics, a thermostat, an indicator lamp, and cord wrap..
  • 【Multiple Fuel Options】: Kerosene forced air heaters are CSA certified for multi-fuel use with these fuel types: kerosene, filtered diesel #1 and #2, fuel oil #1 and #2, or even jet A fuel (JP8). However, K1 Kerosene is the manufacturer's recommended fuel for optimal, cleaner burns and long-lasting product life..
  • 【Sturdy Steel Construction】: Rugged construction allows kerosene shop heaters to be used in winter. Typical uses include construction sites, patios, factories, sporting events, utility and outbuildings, and farming functions, (barns, etc)..
  • 【Requires Little to No Assembly】: This torpedo heater diesel is easy to assemble and has convenient maintenance. multi-fuel forced air heaters provide immediate relief from cold weather working conditions. Which is easy to convenient maintenance..
  • 【Warranty】: BILT HARD forced air kerosene heater is guaranteed for 1 year. We aim for quality followed up ....
Check Stock