Reviews Focus Calibration Reference Card

RSI Pocket Protocol —Intubation Pocket Reference Card (Double Sided Adult/Peds…

  • INDISPENSABLE PRE-CALCULATED DOSING GUIDE FOR HEALTH CARE PROFESSIONALS | User-friendly Intubation (RSI) Emergency Dosing guide. Standard dosing for adult/peds. Organize the Chaos of an emergency.
  • DOUBLE SIDED SINGLE SLIDE CARD | This essential resource features pre-calculated adult/peds medication doses..
  • POCKET SIZE FOR INSTANT ACCESS AND EASY PORTABILITY | Durable, advanced airway reference card is designed to fit in your pocket or medic bag so it’s always within reach. Don’t worry about an internet connection when you have this card as field notes..
  • LOCKING SLIDE MECHANISM | Pocket medicine reference card features a slide mechanism that locks, decrease medication errors with accurate up to date RSI dosages..
  • A LIFESAVER IN CRITICAL CARE SITUATIONS | Enjoy peace of mind knowing you don’t need to worry about doses or convert pounds to kilograms.
  • the card has them listed for you. Focus on the patient rather than the calculations..
Check Stock

Vello LENS-2020 Lens Calibration Tool

  • This compact ruler allows you to determine if your lens is auto-focusing accurately as it should. It is an essential tool that is particularly useful when shooting with a shallow depth of field, where focusing should ideally be "spot on"..
  • You can use this ruler to determine how "off" the focusing is for a particular camera / lens combination and, on supported cameras, adjust the camera's auto-focus settings to resolve this.
  • On Nikon cameras, this feature is known as "AF Fine Tune". On Canon and Sony cameras, it's known as "AF Micro Adjustment". Please refer to your camera's instructions manual to see if this feature is present..
  • Package Included: Lens Focus Calibration Card X 2.
Check Stock

Traceable Excursion-Trac™ Data Logging Thermometer with Calibration; 1 Bottle Probe

  • ...uration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment for sensor drift and readings in C, F, K and Ohms. The versatile data logging feature can be used to s....
Check Stock

AT4516 16 Channel Digital Thermometer High Temperature Data Logger Temperature Chart Recorder

  • ...uration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment for sensor drift and readings in C, F, K and Ohms. The versatile data logging feature can be used to s....
Check Stock

Traceable Memory-Loc Dual Zone Temperature Monitoring & Data Logger Kit (TM-6441)

  • ...uration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment for sensor drift and readings in C, F, K and Ohms. The versatile data logging feature can be used to s....
Check Stock

ThermoProbe TL2-A Precision Bench-top Laboratory Reference Thermometer – Dual Channel & USB Data Logger

  • ...uration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment for sensor drift and readings in C, F, K and Ohms. The versatile data logging feature can be used to s....
Check Stock

ThermoProbe TL2-A Precision Bench-top Laboratory Reference Thermometer – Dual Channel & USB Data Logger

  • ...uration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment for sensor drift and readings in C, F, K and Ohms. The versatile data logging feature can be used to s....
Check Stock

Arducam Lens Calibration Tool, Field of View (FoV) Test Chart Folding Card, Pack of 2

  • This compact ruler allows you to determine if your lens is auto-focusing accurately as it should. It is an essential tool that is particularly useful when shooting with a shallow depth of field, where focusing should ideally be "spot on"..
  • You can use this ruler to determine how "off" the focusing is for a particular camera / lens combination and, on supported cameras, adjust the camera's auto-focus settings to resolve this.
  • On Nikon cameras, this feature is known as "AF Fine Tune". On Canon and Sony cameras, it's known as "AF Micro Adjustment". Please refer to your camera's instructions manual to see if this feature is present..
  • Package Included: Lens Focus Calibration Card X 2.
Check Stock

MeterTo S220-T8 USB LCD Multi-Channel Thermocouple Thermometer Temperature Data Logger 8 Channels -200~+1800℃ ºC or ºF Supporting K,J,E,T,R,S,N,B Thermo-Hygrometer Recording 36,000

  • ...uration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment for sensor drift and readings in C, F, K and Ohms. The versatile data logging feature can be used to s....
Check Stock

GY-AS3935 Lighting Sensor Module SPI I2C MA5532-AE Lighting Strike Thunder Storm Distance Detector Breakout Board

  • Reference link: https://tinyurl(dot)com/AS3935-light-detector.
  • Video link: https://youtu(dot)be/oXqSIyaHR_I.
  • The splitter uses an inductor (antenna) designed specifically for this application, and the board is fully calibrated.This ensures that you can support low-level IC calibration without having to write a large back-end – focus on your end application!.
  • This sensor cannot drive an LCD display on it own It will need a microcontroller, like ESP8266/ESP32 or Arduino Pro Mini / Pro Micro 3.3V The Microcontroller will control the sensor and control the display as well..
  • What you will get is : 1 X GY-AS3935 Lightning Sensor.
Check Stock

Ambient Weather WS-228TBH 9\ Brushed Aluminum Contemporary Barometer with Temperature and Humidity, Metallic Radiant Blue

  • The USA version of this instrument displays barometric pressure in imperial units (inHg) and includes a reference needle for tracking changes..
  • The 9" brushed aluminum bezel and radiant blue dial is both bold and handsome. It's contemporary design is at home in the office, board room or the modern living room setting..
  • The barometer is equipped with a set screw for easy calibration. The back includes a hook for easy hanging..
  • A reference needle tracks changes in barometric pressure..
  • The barometer allows for sea-level calibration up to 3,000 feet. Do not purchase this barometer is you live above 3,000'..
Check Stock

EZshoot Scope Leveling Kit with High-Precision Bubble Leveling System, Magnetic Universal Leveling Tool, Compact Storage Case for Equipment and Maintenance

  • Easy use – The reference level is equipped with an ultra-strong magnetic bottom, placing steadier on the scopes turret cap with steel inside. Smaller bubbles, more accurate calibration, combine it with the barrel clamp level until the reference level is aligned with the barrel clamp level..
  • Higher Accuracy – We optimized the calibration distance and all the levels are carefully checked at the factory. The integrated bubble is more accurate and sensitive to adjust the crosshair of your scope, effectively enhance precision, especially long-range shooting, even 101 yards away..
  • Premier Craft – Non-marring pads of barrel clamp prevent scratching from your barrel. The scope leveling kit is made of rugged aluminum alloy with an anodized finish..
  • Versatility – This level scope mounting is excellent for leveling various diameter barrel, red dot and other optics..
  • Package Include – 1 x Reference Level, 1 x Barrel Clamp Level, 1 x Allen Key, 1 x Instructions and friendly customer service..
Check Stock

EZshoot Scope Leveling Kit with High-Precision Bubble Leveling System, Magnetic Universal Leveling Tool, Compact Storage Case for Equipment and Maintenance

  • Easy use - The reference level is equipped with an ultra-strong magnetic bottom, placing steadier on the scopes turret cap with steel inside. Smaller bubbles, more accurate calibration, combine it with the barrel clamp level until the reference level is aligned with the barrel clamp level..
  • Higher Accuracy - We optimized the calibration distance and all the levels are carefully checked at the factory. The integrated bubble is more accurate and sensitive to adjust the crosshair of your scope, effectively enhance precision, especially long-range shooting, even 101 yards away..
  • Premier Craft - Non-marring pads of barrel clamp prevent scratching from your barrel. The scope leveling kit is made of rugged aluminum alloy with an anodized finish..
  • Versatility - This level scope mounting is excellent for leveling various diameter barrel, red dot and other optics..
  • Package Include - 1 x Reference Level, 1 x Barrel Clamp Level, 1 x Allen Key, 1 x Instructions and friendly customer service..
Check Stock