Reviews Foam Sheet Dies

Tim Holtz Ticket Booth - Stampers Anonymous Cling Stamps and Sizzix Framelits Die Set

  • Tim Holtz Designed Cling Stamps by Stampers Anonymous - TICKET BOOTH - 10 deeply etched red rubber cling stamps.
  • These red rubber stamps come mounted on cling foam so you can use them with any acrylic block (sold separately). Stamps come on a 3-hole punched sheet for easy storage..
  • Tim Holtz Designed Framelits Dies - TICKET BOOTH - 6 dies.
  • Coordinating framelit dies cut right up to the stamped edge. Die set includes a handy storage envelope..
  • Approximate sizes: Bus ticket (lower left) measures approximately 3 3/4 x 1 3/8, Admit One ticket (top center) measures approximately 1 3/4 x 15/16 inches.
Check Stock

Bead Roller Round-Over Dies Commplete Set Cr12

  • 1.Material:Cr12, Rockwell Hardness = 40 HRC.
  • 2.Radius Dies Includes 4 piece set: 5/16 inch radius die set 1/2 inch radius die set 1 inch radius die set 1-1/2 inch radius die set.
  • 3.Round-Over Dies can produce smooth, even, large-radius edges in steel and aluminum.
  • 4.The Bead Roller Dies Fits for Most Bead Rollers With 22mm Shafts.
  • 5.For Radius Edges of Sheet Metal,Bead Roller Sheet Metal.
Check Stock

Sizzix Thinlits By Tim Holtz Alterations - Witchcraft - 3 Piece Die Set 662386

  • Thinlits dies allow you to cut intricate designs from a single sheet of paper, card, metallic foil, vellum, shrink plastic and stencil film..
  • Wafer-thin chemically-etched die sets are designed to cut, emboss or stencil a single sheet of cardstock, paper, metallic foil or vellum.
  • Simple to use, compact and portable for cutting at home or on the go. Use them for enhanced intricacy and to add a special touch of inspiration to all....
  • The thinlits dies in this set are compatible with the bigkick, big shot and vagabond machines. To cut, the sandwich requires use of a pair of cutting....
  • Because of their intricacy, thinlits dies may require up to three passes to cut. For easier separation of the die-cut from the design, place wax paper....
Check Stock

Sizzix Thinlits Die Set 662421, Snowglobe #2 by Tim Holtz, 26 Pack, Multi Color, One Size

  • Thinlits dies allow you to cut intricate designs from a single sheet of paper, card, metallic foil, vellum, shrink plastic and stencil film..
  • Wafer-thin chemically-etched die sets are designed to cut, emboss or stencil a single sheet of cardstock, paper, metallic foil or vellum.
  • Simple to use, compact and portable for cutting at home or on the go. Use them for enhanced intricacy and to add a special touch of inspiration to all your projects.
  • The thinlits dies in this set are compatible with the bigkick, big shot and vagabond machines. To cut, the sandwich requires use of a pair of cutting pads and the machine’s included platform.
  • Because of their intricacy, thinlits dies may require up to three passes to cut. For easier separation of the die-cut from the design, place wax paper between the die and your material.
Check Stock

Hand Held Power Punch Sheet Metal Hole Punch Kit Compound Leverage

  • Included Dies: 3/32"(2mm), 1/8"(3mm), 5/32"(4mm), 3/16"(4.5mm), 7/32"(5.5mm), 1/4"(6mm), 9/32"(7mm).
  • Ideal for punching holes on a variety of materials and applications including aluminum, brass, steel sheet metal, leather, polyurethane, plastic, canvas, cardboard, paper, belt, shoes and etc..
  • Precisely machined chrome vanadium steel punches and dies hardened to 52 hardness creates clean holes through sheet metals up to 16 gauge.
  • Punches 7 Sizes of Precision Round Holes in Aluminum, Plastic, Brass, Even 16-Ga 1-1/2" Throat Includes Die Adjusting Key & Blow Mold Case.
  • SHIPPING-IT will be shipped within 24h, delivery in 7-12 days. Contact us if any problems..
Check Stock

VCT Multi-Purpose Power Hole Punch Kit 7 Sizes from 3/32” to 9/32”

  • Super Duty all metal construction makes it one of the most powerful hand held hole punches on the market.
  • Compound high leverage design gets the job done more efficiently and requires less effort.
  • Precisely machined chrome vanadium steel punches and dies hardened to 52 hardeness, creates clean holes through sheet metals up to 16 gauge (not to be....
  • Includes 7 sizes of punches and dies: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 1-pc throat depth gauge and 1-pc heavy duty storage case.
  • Ideal for punching holes on a variety of materials and applications including aluminum, brass, steel sheet metal, leather, polyurethane, plastic,....
Check Stock

Sizzix Accessory Sticky Grid Sheets 6' x 8 1/2' 5 Pack, Multicolor 5

  • Stick to the perfect start! At 5 3/4" x 8 1/2", the Sizzix Sticky Grid Sheet Sheets are sized perfectly to hold Thinlits and Framelits dies firmly in place in the Big Shot, Big Shot Plus, Big Shot Pro and Vagabond machines with Standard Cutting Pads..
  • Just peel and stick to your Standard Cutting Pad and the helpful grid lines will show the way to easy alignment for the perfect registration especially when cutting letters, numbers and more.
  • For added convenience, a temporary adhesive allows the sheet to be used multiple times on either side. It’s just sticky enough to adhere to your dies and Cutting Pad, but won’t tear your paper.
Check Stock

SWAG HEMMING DIES, FIT THE 12 & 20 TON FINGER BRAKES ONLY

  • The kit consists of 32 individual pieces that when fully assemble forms an 8" long Hemming die..
  • Increase the bending capabilities of your SWAG Finger Press Brake kit!.
  • Hemming Dies for Folding Sheet Metal over on itself, or another part..
Check Stock

Cutting Dies 5pcs Flowers Leaves Craft Dies Handmade DIY Stencils Template Embossing for Card Scrapbooking Craft

  • Package Include: The metal cutting dies set contains 5 pcs metal.Size:the max dia of flower is 2.3",leaves： 3.3*2.3",1.5*2.2"..
  • Craft dies for Card Making ,Suitable for Scrapbooking, Paper Card, Embossing, A wonderful handmade, DIY craft gift for your friends. it also can be a wonderful handmade tool for children to develop their creativity..
  • Can put in your photo album to beautify your DIY photo crafts..
  • Scrapbooking dies designed to cut a single sheet of cardstock, paper, chipboard, metallic foil or vellum and more..
Check Stock

Gejoy 4 Pieces Butterfly Set Cutting Dies Metal Butterfly Die Embossing Stencils for Thanksgiving Christmas Card Paper DIY Craft Decoration

  • Sturdy material: these cutting dies are made of steel in silver color, sturdy enough to have a longer usage time, the texture of the material can also affect the effect of your crafts.
  • Butterfly patterns: the 4 pieces come in different aspects of butterflies, you can cut a single sheet of cardstock, paper, metallic foil or vellum to your desired shape.
  • Easy matching size: the cutting dies lengths vary from 1.46 to 2.6 inches, the crafts you created through the dies suit for many items decorations like albums, birthday cards and other crafts.
  • Wide applications: suitable for creating crafts, you can impress your friends and family by this delicate stencil, work for cards celebrating a range of occasions, you'll create something that with characteristic.
  • Quantity: there are 4 pieces butterfly cutting dies in different shapes and sizes, flexible and sufficient.
Check Stock

Sizzix Accessory Black Mini Set Inspired by Tim Holtz Die cutting tool kit

  • MINI TOOL SET - The perfect black mini set that has been inspired by Tim Holtz, it's a great accessory to your crafting kit..
  • DIE PICK - The Die Pick, picks scraps out of dies and small pieces of paper from the die cut-out..
  • MINI DIE BRUSH - The Mini Die Brush rolls away excess paper in any wafer-thin, chemically-etched die..
  • MINI FOAM PAD - Mini Foam Pad act as a perfect work surface for removing excess paper from the dies and the cut-out!.
  • PRODUCT DIMENSIONS – Foam Pad (5. 2” x 0. 5” x 0. 5”).
Check Stock

ABN Power Punch Heavy Duty Hole Punch Set – Metal Hole Punch, Heavy Duty Hole Puncher Hand Punch 3/32in to 9/32in

  • PUNCH HOLES IN YOUR PROJECT: The ABN Hole Punch Tool is a heavy duty punch and dies kit that has a high-leverage design and comfortable grips that allow you to manually create clean holes through sheet metals up to US 16 gauge.
  • For mild sheet steel, aluminum, brass, polyurethane, plastic, canvas, cardboard, paper, shoe.
  • Additionally use as a leather punch, belt hole puncher, metal hole punch for jewelry, and watch hole puncher.
  • Not recommended for stainless steel such as silverware and utensils.
  • PERFECT SIZE: Creates holes that are from 3/32-inch to 9/32-inch in diameter and includes a stop gauge for consistent spacing.
  • 7 sizes of punches and dies include 3/32-inch (2mm), 1/8-inch (3mm), 5/32-inch (4mm), 3/16-inch (4.5mm), 7/32-inch (5.5mm), 1/4-inch (6mm), 9/32-inch (7mm).
  • 1.75-inch (4.4cm) throat depth to punch holes as close as 1.75 inches away from material edge.
  • EASY TO USE: This sheet metal punch uses interchangeable heads to pierce holes in a material of your choosing.
  • Select a proper size punch and die, remove nut near handle using die adjustment tool, move connection bar, place punch on the head of hand punch, rotate nut by again using the adjustment tool to adjust caliper, and set distance between the edge and the hole.
Check Stock

Metal Die Cuts Set Include 4 Different Patterns Round Lace Flower Border Cutting Dies Cut Stencils for Scrapbooking Photo Album Decorative Embossing Paper Dies for Card Making Template (Silver)

  • ...occasions. You'll have the perfect die cut design to add to your paper art masterpiece!.
  • High quality thin metal dies made of 100% hard carbon steel, these steel dies will cut card, thin particle board, felt, acetate, rubber canvas, fabric, denim, sandpaper, 2mm craft foam, wood veneer, photo etc! Compatible with most major brands, very fun and practical!.
  • You can contact us for after-sales service via 24-hour public email. If there is any problem with your product, we will provide you with a satisfactory solution immediately..
Check Stock