Reviews Fn Series Compressor

California Air Tools CAT-60040CAD Ultra Quiet 60 Gal Compressor

  • 150 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered at 90 PSI pump, enable long tool run time with quick recovery for the air compressor combo kit.
  • Compressor features long-life oil-free, maintenance-free pump for convenient use.
  • BOSTITCH high efficiency motor for easy start up in cold weather or extension cord application [14 ga or larger, 50 ft. (15.2 m) or less].
  • 78.5 dBA operational noise level for a quiet work environment.
  • SB-1850BN 18 GA brad nailer drives 18GA brad nails from 5/8-inch to 2-inch.
  • SB-1664FN 16 GA straight finish nailer drives 16 GA straight finish nails from 1-1/4-inch to 2-1/2-inch.
  • 1/4-inch x 15 ft. PVC air hose includes fittings.
Check Stock

2 Gallon 135 PSI Ultra Quiet Hand Carry Jobsite Air Compressor

  • 150 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered at 90 PSI pump, enable long tool run time with quick recovery for the air compressor combo kit.
  • Compressor features long-life oil-free, maintenance-free pump for convenient use.
  • BOSTITCH high efficiency motor for easy start up in cold weather or extension cord application [14 ga or larger, 50 ft. (15.2 m) or less].
  • 78.5 dBA operational noise level for a quiet work environment.
  • SB-1850BN 18 GA brad nailer drives 18GA brad nails from 5/8-inch to 2-inch.
  • SB-1664FN 16 GA straight finish nailer drives 16 GA straight finish nails from 1-1/4-inch to 2-1/2-inch.
  • 1/4-inch x 15 ft. PVC air hose includes fittings.
Check Stock

Dixell XR06CX-4N1F1 Adjustable Touch Screen Digital Thermostat Controller Compressor Defrost Fans 110V/50-60Hz for Refrigerating Units

  • XR06CX is for applications on medium or low temperature ventilated refrigerating units.With FC parameter it can be selected the fans functioning FC=cn will switch ON and OFF with the compressor and not run during defrost FC=on fans will run even if the compressor is off, and not run during defrost After defrost, there is a timed fan delay allowing for drip time, set by means of the Fd parameter..
  • FC=cy fans will switch ON and OFF with the compressor and run during defrost FC=oY fans will run continuously also during defrost. An additional parameter FS provides the setting of temperature, detected by the evaporator probe, above which the fans are always OFF. This is used to make sure circulation of air only if his temperature is lower than set in FS..
  • FANS AND DIGITAL INPUT When the digital input is configured as door switch iF=do, fans and compressor status depends on the dC parameter value: dC=no normal regulation.
  • dC=Fc compressor and fans OFF. When rd=y, the regulation restart with door open alarm.
  • SAFETY PRECAUTIONS Check the supply voltage is correct before connecting the instrument. Do not expose to water or moisture: use the controller only within the operating limits avoiding sudden temperature changes with ....
Check Stock

BOSTITCH U/BTFP2KIT Reconditioned 2 Piece Nailer and Compressor Combo Kit Renewed

  • BTFP02012 6 gallon 150PSI 2.6SCFM pancake compressor with a high efficiency motor.
  • SB-1850BN 18 GA Brad nailer drives 18GA brad nails from 5/8" to 2" for a wide variety of applications.
  • SB-1664FN 16 GA Straight Finish nailer drives 1-1/4- to 2-1/2-inch, 16-gauge finish nails.
Check Stock

(2 Pack) COMPUMATIC Compatible/Replacement uPunch HN3000 HN4000 FN1000 Ink Ribbon Cartridge

  • Ink ribbon cartridge for all uPunch HN and FN series time clocks.
  • Compatible with HN1000, HN2000, HN3000, HN4000, FN1000 time clocks and HN1500, HN2500, HN3500, HN3540, HN4500, HN4540, UB1000, UB2000 bundles.
  • Replaces uPunch part number HNR10, HNRG10, HNRL10, FNRB10 compatible with Green, Grey, Blue, and Original uPunch models.
  • 2 ribbons included. Individually sealed, long shelf life.
Check Stock

BOSTITCH U/BTFP3KIT 3-Tool and Compressor Combo Kit Renewed

  • BTFP02012 6 gallon 150PSI 2.6SCFM pancake compressor with a high efficiency motor.
  • SB-1850BN 18 GA Brad nailer drives 18GA brad nails from 5/8" to 2" for a wide variety of applications.
  • SB-1664FN 16 GA Straight Finish nailer drives 1-1/4- to 2-1/2-inch, 16-gauge finish nails.
  • BTFP71875 HD 3/8" Crown Stapler drives heavy duty 3/8" Crown staples from 1/4" to 9/16".
Check Stock

Sun Joe 24V-AJC-LTW 24-Volt Cordless Portable Air Compressor with Nozzle Adapters and Storage Bag, Kit (w/1.3-Ah Battery + Quick Charger)

  • 150 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered at 90 PSI pump, enable long tool run time with quick recovery for the air compressor combo kit.
  • Compressor features long-life oil-free, maintenance-free pump for convenient use.
  • BOSTITCH high efficiency motor for easy start up in cold weather or extension cord application [14 ga or larger, 50 ft. (15.2 m) or less].
  • 78.5 dBA operational noise level for a quiet work environment.
  • SB-1850BN 18 GA brad nailer drives 18GA brad nails from 5/8-inch to 2-inch.
  • SB-1664FN 16 GA straight finish nailer drives 16 GA straight finish nails from 1-1/4-inch to 2-1/2-inch.
  • 1/4-inch x 15 ft. PVC air hose includes fittings.
Check Stock

PORTER-CABLE PCFP3KIT 3-Nailer and Compressor Combo Kit

  • C2002 shroud allows for better protection and portability.
  • C2002 has 2.6 SCFM at 90 psi, allowing for quick compressor recovery time, per ISO1217.
  • FN250SB uses standard 16 Ga. finish nails from 1 in. to 2-1/2 in. long.
  • BN200SB uses standard 18 Ga. brad nails from 5/8 in. to 2 in. long.
  • PIN138 uses 23 Ga. headless and slight head pin nails from 5/8 in. to 1-3/8 in. length.
Check Stock

Frigidaire 5304475102 Compressor Kit for Refrigerator

  • The Frigidaire Compressor Kit is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications.
  • Frigidaire Compressor Kit is a positive displacement pump that compresses the refrigerant in the sealed system of a refrigerator.
  • Frigidaire 5304475102 fits some Kenmore and Kenmore Elite 253-series refrigerators and freezers.
  • it also fits some Frigidaire, Electrolux, Crosley,....
  • The high quality Frigidaire Compressor Kit includes compressor, start relay & overload, filter drier, and copper tubing.
  • With Frigidaire, you can be sure you’ll receive effortless features and quality materials, giving you the highest quality performance for the life....
Check Stock

Makita MAC5200R 3.0 HP Air Compressor (Renewed)

  • Quiet Series compressor design at only 58 dB for operator and crew comfort.
  • Compressor runs at a lower RPM (1,750) resulting in longer motor and pump life.
  • Complete roll-cage construction provides the compressor with protection to withstand a variety of job-site, transporting, and storage environments.
  • Oil-free dual-piston pump designed for maintenance-free operation.
  • Compressor features a lightweight design for increased job site portability, an oil-free dual-piston pump designed for maintenance-free operation, and a cord wrap for convenient AC power cord storage.
Check Stock

2 Pcs Piston Ring Oil-Less AB-9040019 For Husky Bostitch Air Compressor CAP2000P CAP2040P CAP1512 CAP60PB CAP60P

  • Fits Models: H27508UWK / A600006. Does NOT fit the "WL" or other series units. Part Numbers: AB-9040019, AB9040019.
  • 40mm ID. This is for the 50mm Cylinder Bore..
  • This part is installed on top of the piston/connecting rod.Its purpose is to create a seal in the cylinder so that air can be pump into the compressor tank..
  • If this part wears your compressor will not pump the air properly.This is a wear part and it is advised to keep an extra one on hand..
  • This part is compatible with the following machines: Bostitch CAP2000P-OF Type 0 Air Compressor CAP2040P-OF Air Compressor CAP60P-OF Air Compressor CAP60PB-OF Air Compressor CAP1512-OF (Type 0) Air Compressor.
Check Stock

Bostitch Air Compressor Combo Kit, 3-Tool (BTFP3KIT) 21.1 x 19.5 x 18 inches

  • SB-1850BN 18 GA brad nailer in the air compressor combo kit drives 18GA brad nails from 5/8-inch to 2-inch.
  • SB-1664FN 16 GA straight finish nailer drives 16 GA straight finish nails from 1-1/4-inch to 2-1/2-inch.
  • BTFP71875 heavy-duty 3/8-inch crown stapler drives 3/8-inch crown staples from 1/4-inch to 9/16-inch and 18GA brad nails from 1/2-inch to 5/8-inch.
  • 1/4-inch x 15' PVC air hose includes fittings.
Check Stock

94-97 Powerstroke 7.3 TP38 Turbo Cast Compressor Wheel DIY Upgrade Kit

  • Bigger 66/88mm cast compressor wheel provides much more airflow than stock 60/80mm compressor wheel and solves the commen surge problem.
  • Stepped Gap Ring eliminates oil leakage Problem.
  • 360 degree thrust bearing for performance applications.
  • Fit vehicle: 1994-1997 E&F Series with Powerstroke 7.3L diesel engine.
  • NOTE: You will need a 3.5″ intake hose to fit the new 3.5″ ported inlet Compressor Housing.
Check Stock