5 Pieces No Clean Solder Flux Pen 5.6 Inch Length for Electronics Tabbing Wire Soldering Welding Repair
- What can you get: the package includes 5 pieces of no clean solder flux pens, enough quantity providing you a wide choice for daily life use and replace.
- Proper size: the soldering no clean flux pen measure approx. 14.3 cm/ 5.6 inches in length, please check the size carefully before purchasing.
- Reliable and quality material: the liquid soldering pen is made of reliable materials and no leak and safe design for protecting the flux, keep you from touching the organic solvents.
- Wide applications: these flux pens can be applied for laboratory, computer, telecommunications, home repairs, bringing a lot of convenience to your work.
- Simple operation: you only need to press the pen tip 1-2 times to release the liquid, and after use, the flux pen can be cleaned with alcohol.
Check Stock
10 Pieces No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance
- Nice combination: you will get 5 no clean soldering flux pens and 5 solder remover wick sets, 10 in total, sufficient quantity, thoughtful combination, to meet daily use and replacement needs.
- Appropriate size: the no-clean solder wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, and liquid flux brush flux pen is about 15 x 1.5 cm/ 6 x 0.6 inch, convenient to hold.
- Please check the size carefully before purchasing.
- Multiple reliable materials: these no-clean braided soldering wicks are made of quality copper wire, using nice weaving technology, which can enhance surface tension and absorb excess solder.
- And flux remover pen adopts quality material, non-leakage, flux safe and prevents you from being exposed to organic solvents.
- Practical tools: soft brush tip flux pen releases a moderate stream of liquid to clean components without spoiling the PCB copper foil or IC pins.
- Solder remover has good thermal conductivity and absorption, helping to reduce the risk of thermal spoiling to the board.
- Broad utilization: these flux pens and braided solder wicks can be applied in laboratories, computers, home repairs and to correct small PCB errors and through-hole joints, electronic soldering and much more, bringing a lot of convenience and effic....
Check Stock
No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance (6 Pieces)
- Package includes: you will receive 3 pieces of no clean solder flux pens, and 3 pieces of soldering braided wick, in total of 6 pieces, sufficient quantity and a considerate combination to meet your needs for daily use and replacement.
- Suitable size: the rosin flux pen measures about 14.3 cm/ 5.6 inches in length, and the solder braided wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, which is convenient to hold in hand.
- Please check the size carefully before purchasing.
- Quality material: these no-clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder.
- The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents.
- Practical tools: 10-ml solder flux pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin.
- The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards.
- Wide applications: these flux pens and braided solder wicks can be applied for laboratory, computer, home repairs and ....
Check StockFK Irons - Spektra Flux Rotary Tattoo Machine with 2 PowerBolts - Chromium - Wireless USB Rechargeable, Includes 2 PowerBolts Tattoo Battery Power Supply, 4mm Stroke
- Wireless Tattoo Machine - The Spektra Flux wireless rotary tattoo machine is here. A pen-style tattoo machine in a lightweight, ergonomic design..
- Up to 10 Hours of Battery - This machine for tattooing is impressively powerful offering up to 10 hours of battery life and a fast charging speed. Includes 2 PowerBolt battery packs..
- USB Rechargeable - Charge your rotary pen tattoo machine from any USB-C power plug in your car, laptop, or battery pack. It can charge as quickly as 2 hours..
- Versatile Stroke - With a 4mm direct drive versatile stroke, it’s an ideal liner tattoo machine and color packing tattoo machine. Great for lining and color packing..
- Bluetooth Compatibility - Pair the Spektra Flux direct drive tattoo machine with the Darklab app for firmware updates. Designed with a 33mm grip for comfort..
Check StockSRA #312 Soldering Flux Pen Low-Solids, No-Clean 10ml - Refillable
- For rework and touch-up of SMT, SMD, and through hole solder joints.
- Contains 10 ml of No-Clean Low Solids Flux.
- Suitable for automotive, computer, telecom.
- Compatible with Lead and Lead-Free Solders.
Check StockCanfield 50/50 solder for stained glass 1 Lb Spool
- Non-corrosive non-conductive flux residue.
- Melting point: 183 °c - 191 °c/ 361 °f - 376 °f.
Check StockHobart 770487 Gasless Fluxed Cored Nozzle for Handler 125 EZ
- For handler 125EZDescriptionHobart Flux-Cored 1/2in. Welding Nozzle fits Hobart Handler 125, 140, 187, 190, 210, 210MVP and TREK 180 welding guns. 1/2in. size. Product Type: Nozzle, Product Style: Flux-cored, Size: 1/2 in., Works With: Hobart Handler welder.
Check Stock2 Jar Solder Flux, Flux for Soldering, Rosin Soldering Flux Paste for Lead-Free Electronics Soldering and Soldering DIY (1.2oz/35g in a Jar)
- ENOUGHT QUANTITY: The package includes 2 jars of soldering flux. A total of 70 g. Enough quantity for your use..
- NON-CORROSIVE: Rosin is not conductive in dry conditions and has good insulation. Is not corrosive to metal substances such as circuit boards..
- OXIDATION RESISTANCE: Anti-oxidation effect on soldering iron head of gold-copper alloy substrate. Solder flux for semi-solid, not easy to dump..
- STRONG APPLICABILITY: Flux is suitable for welding instruments, gold, copper, tin, iron and other metals. Ideal for electronic welding, repair and rework..
- WHAT YOU GET: Rosin soldering flux paste * 2, our 7*24 friendly customer service for peace of mind..
Check StockMetal Man MFCN2PK Flux Core Nozzle, Black, Pack of 2
- Nozzle protects your gas diffuser when flux core welding with a MIG gun.
- Works with Metal Man and other standard welding torches.
- Package includes two (2) nozzlesDescriptionMetal Man's mission is to provide both hobbyist and professional metal workers with products that are unique,have exceptional value, easy to use functions and features, and appealing style. These Metal Man Flux Core Nozzles protect your gas diffuser when flux core welding with a MIG gun come in a pack of 2..
Check StockMG Chemicals 60/40 Rosin Core Leaded Solder, 0.032" Diameter, 0.6 oz Pocket Pack
- Non-corrosive and electrically non-conductive flux residue.
- Standard flux core percentage at 2.2 percent, melting point: 183 degree C/361 degree F.
Check Stockyzc Rosin core solder-Solder wire 63-37 Solder flux, Electronic solder, diameter 1MM, net weight 20G, portable storage tube, suitable for electronics, circuit boards, ICs, etc. DIY(Rosin core solder)
- 【rosin core solder wire:】Solder flux solder wire with special formula of high-quality tin ingots from Yunnan, China and high-quality rosin..
- 【Tin wire parameters:】 rosin solder wire Tin 63%- Lead 37% (Sn63-Pb37)..
- 【Soldering wire specifications:】rosin flux content 1.8%, rosin solder wire 1.0mm (0.0394inch), 20 gm (0.044lbs), gross weight 28 gm (0.0617lbs),Tin pen is suitable for carrying in a pocket..
- 【Low melting point:】 361F/183C. Easy to solder, smooth flow, fast soldering speed and firm solder joints..
- 【Electronic solder Application:】Rosin core solder wire for-solder for electronics Have Very good soldering ability, especially the repair of electrical equipment such as circuit boards,electronics，IC, home improvement, cable TV, radio/sterro,toys etc DIY..
Check StockMG Chemicals 4890 60/40 Rosin Core Leaded Solder Wire Pocket Pack 0.81mm/0.032 Dia 2 Pocket Packs
- Non-corrosive non-conductive flux residue.
- Melting point: 183 °c - 191 °c/ 361 °f - 376 °f.
Check Stock
WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger
- Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
- Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
- Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
- Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
- brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
- U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..
Check Stock
