Reviews Flush Valve Wrench

Danco 80816 Complete Toilet Repair Kit Fill Valve, Flapper, Rod, Float Replacement, White

  • TOILET REPAIR KIT: The Danco Toilet Repair Kit includes replacement parts for the most common toilet parts that cause a leaky toilet and will restore your toilet to its original working condition..
  • TOILET FILL VALVE DIMENSIONS: The fill valve height is approximately 8.5 inches from the bottom of inside the tank..
  • TOILET BALL ROD FLOAT & BALL FLOT DIMENSIONS: The length of the brass rod is 7.75” and the length of the float is 5.5”.
  • when the brass road is threaded into both the float and threaded into the fill valve, the total length of the rod and float ends up being about 11.75”..
  • TOILET FLAPPER DIMENSIONS: The toilet flapper is ideal to replace worn-out flappers and is designed to fit 2 in. toilet flush valves..
  • EASY TO INSTALL: Includes easy to follow installation instructions. Complete this DIY Project with common household tools such as screwdriver and adjustable wrench..
  • BUILT TO LAST: The durable plastic and rubber constructions provides strength and durability which allows for optimal performance..
  • SINGLE-FLUSH APPLICATIONS: This toilet repair kit works for standard single-flush applications..
  • COMPLETE TOILET REPAIR KIT INCLUDES: Universal flapper with adapter, spring, float with rod, and ballcock with refill tube..
Check Stock

Toilet Economizer Dragon de Agua | 40% EcoFriendly Water Saver

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS..
  • FLUSH VALVE REPLACeMENT INSTALLATION TIP: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve.
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank.
  • the Dual Flush Converter is a replacement to the existing flapper.
  • slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
  • the permafit silicone seal is also chlorine and chemical resistant and will not warp.
Check Stock

American Standard SELECTRONIC 6065121.002 Chrome

  • BEST-IN-CLASS: The Selectronic toilet flush valve by American Standard has a self-cleaning piston design that eliminates routine maintenance and....
  • FEATURES: Toilet flush valve has an integral wiper spring cleans the refill orifice with every flush.
  • American Standard toilet parts deliver reliable....
  • FLAWLESS DESIGN: This toilet flush valve has state-of-the-art electronics that prevent ghost flushing and a fully mechanical manual override button....
  • SIZE: The American Standard Exposed Selectronic toilet flush valve is capable of meeting ADA requirements when installed under a grab-bar that is....
  • INCLUDES: American Standard toilet flush valve also includes a 8-year CR-P2 lithium battery installed.
  • has no diaphragms requiring replacement or....
Check Stock

American Standard SELECTRONIC 6063013.002, Chrome

  • URINAL FLUSH VALVE: Ultima Selectronic Touchless Automatic Urinal Flush Valve features a touchless automatic sensor, a self-cleaning piston, and a valve that automatically switches to water savings mode during periods of heavy usage.
  • TOUCHLESS AUTOMATIC SENSOR: Touch-free design helps keep the bathroom clean and hygienic.
  • Programmable sensor allows for easy adjustment and customization.
  • 8-year CR-P2 lithium battery installed in valve.
  • SELF-CLEANING PISTON: Self-cleaning piston saves time and money by eliminating routine maintenance and preventing the valve from running due to clogs.
  • Pressure Compensation feature ensures accurate flush volume regardless of inlet water pressure.
  • DEPENDABLE DESIGN: Fail-Safe flush value with mechanical manual override that can operate without power.
  • Valve automatically closes upon loss of power or water pressure.
  • Adjustable sanitary flush cleans the fixture and maintains the trap seal.
  • INCLUDES: One urinal flush value with battery.
  • 11-1/2 inch rough-in and fits 3/4 inch top spud urinals.
Check Stock

Danco HYR271T Hydroright Dual Flush Valve and Lever Handle White

  • WATER-SAVING TOILET FLUSH VALVE: The HydroRight replacement toilet flush valve easily converts most standard toilets into a dual-flush water-saving....
  • REPAIRS COMMON LEAKY TOILET ISSUES: Eliminates the most common problems in toilets that cause leaks as this flush valve replaces a worn-out toilet....
  • LEVER STYLE HANDLE: Includes lever style split handle flush activator that gives you a choice to use the quick-flush setting which uses less water....
  • COMPATIBILITY: Fits 1.6 to 3.5+ GPF (gallons per flush) standard 2-piece toilets with 2 in. flush valve and requires 10-inch minimum clearance from....
  • EASY NO-TOOLS REQUIRED INSTALLATION: Simple Drop-in installation without tools in less than 20 minutes with NO TANK REMOVAL required..
Check Stock

The GQXY brand that GQ-842 battery Powered Automatic 0.5GPF Sensor and time delay Urinal Flush Valve, for 3/4\ Spud Connection in Urinal

  • This kind of GQ-842 Sensor Urinal flush valve has a exquisite appearance,and is matching with 3/4-Inch Top Spud connection in Urinal.
  • This kind of GQ-842 sensor Urinal flushometer have two different water outlet methods: sensor water outlet and manual water outlet..
  • This kind of GQ-842 flush valve urinal sensing distance is 50-80cm,each sensor time is within 2-5 seconds，and each time sensing water is 0.5GPF..
  • There is a manual button on the GQ-842 urinal flush valve. When the battery is no power, press the manual button, this flush valve can also complete the flush, which is very convenient and efficient..
  • The GQ-842 sensor urinal flush valve belongs to GQXY brand ,is affordable and durable, and the quality is guaranteed..
Check Stock

Danco HYR451T HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Lever Handle, White

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp..
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain..
  • DUAL-FLUSH LIGHT-TOUCH LEVER UNIQUE SPLIT HANDLE DESIGN: The short center lever is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push lever at end is the Full Flush that uses the normal amount of water for solids..
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet's efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve..
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes - tank removal not required..
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush....
Check Stock

Danco HYR460 Hydroright HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Push Btton Handle, White

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp.
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
  • DUAL-FLUSH LIGHT-TOUCH BUTTON UNIQUE SPLIT HANDLE DESIGN: The short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push button at end is the Full Flush that uses the normal amount of water for solids.
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes – tank removal not required.
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flu....
Check Stock

Reed Tool HWB Cast Ductile Hydrant Wrench

  • Shower Valve Socket Wrench Set: The Set comes with five double end wrenches, bar handle and a bar wire holder for easy storage. The hex-shaped bodies allow for use with an adjustable wrench. There is also a hole near each end of the wrench for turning with a long screwdriver..
  • Common Size: This shower valve socket set has 5 pieces of socket with bar handle. Each 125 mm socket has been designed with different sizes helping in quick and easy wrench selection. The socket sizes are 21/32”x 27/32”, 29/32”x 31/32”, 1-1/32” x1-3/32”, 1-5/32”x1-9/32”, 1-11/32”x 1-7/16". The diameter of handle is 9mm..
  • Durable Steel Construction: Made of long lasting durable solid steel and the surface is nickel-plated. 5pcs socket set and afterburner rod are connected with a stainless steel wire..
  • Easy To Use: First, Turn off water supply. Next, Remove faucet handle cap, screw and handle, exposes valve stem and its packing nut. And then, Place correct and of wrench over valve stem onto packing nut, insert handle into opposite side of wrench. At last, Turn clockwise to tighten nut..
  • Which You Need: These plumbing socket wrench set is perfect for removing and installing tub and shower valves, fittings and nuts..
Check Stock

American Standard SELECTRONIC 6063051.002, Chrome

  • ✅ HIGH QUALITY: The toilet urinal flush valve is made of brass material, structural , plated finishing, stable performance, Durable and Solid Structure..
  • ✅ AUTOMATIC TOUCHLESS FLUSH: No need to touch any part of the flusher after urinating. The entire flushing process is mechanically controlled by the sensor, which is suitable and sanitary. The flushing is thorough, no irregular smell is left, avoiding infection of the effectively..
  • ✅ INTELLIGENT WATER-SAVING: The Urinal Valve sensor can control flushing according to the frequency of use, efficiently avoiding the waste of water resources..
  • ✅ LOW CONSUMPTION: The toilet flush valve need low energy consumption, which is powered by 4 AAA batteries, and no need for external power supply..
  • ✅ WIDELY USED: The toilet urinal flush valve exposed wall mounted, provides maximum water conservation and financial savings..
Check Stock

Kohler Part 85406 2\ Toilet Flush Valve Kit, Colors May Vary

  • Flush valve assembly for Wellworth, Highline and various other KOHLER toilets.
  • Includes flush valve, 2" flapper, triangle gasket and bolts.
  • Replaces black flush valve with red flapper.Also replaces part number 84246.
Check Stock

HTDAK 12 Inch (About 30cm) Toilet Fill Valve Silent Toilet Repair Water Saving Dual Flush Fittings Silent Split Toilet Valve Top Button Replacement Assembly

  • Toilet flush valve: for split toilets with top button, button hole diameter 3.8cm, drain hole diameter 6cm-7cm, measured tank height: 27cm-34cm, with tank cover height: 32cm-40cm.
  • Toilet filling valve: for toilets with bottom inlet, installation thread G15/16, adjustable range according to different tank heights: 27cm-34cm..
  • The double flush valve of the toilet can adjust the water level up and down to achieve full flush or half flush, and save water by adjusting the flush volume to reduce unnecessary expenses..
  • The toilet replacement valve kit is made of stainless steel, high-density carbon particle rubber, and high-quality silica gel: it has anti-corrosion, wear-resistant, rust-proof, leak-proof and other properties, and is suitable for operation under various water pressures and water quality..
  • The universal toilet replacement valve body is simple in structure, easy to replace, and only takes 10 minutes to install. It is easy to clean and maintain, so that your toilet components can continue to run smoothly..
Check Stock

American Standard 6561017.020 Trimbrook Urinal with 3/4-In Top Spud, 26.75 in wide x 14.00 in tall x 17.5 in deep, White

  • This kind of GQ-837 dual Urinal flush valve has two different functions, devide to Sensor and Time delay dual functions.
  • When someone stands in front of this GQ-837 Urinal flush valve, this flushometer will automatically sense water after 8 seconds, each time is 1.0 GPF.
  • This kind of GQ-837 dual urinal flushometer is made of Brass ,High Efficiency, Low Consumption..
  • This kind of GQ-837 flush valve surface is polish chrome, and the delay button of this urinal flush valve is on the right ..
Check Stock