Reviews Fluid Connect

vbaxy Brake Bleeder Hose- One Way Check Valve Tube Bleeding Tool Kit for Motorcycle Clutch

  • 【Material】: Aluminum body to resist corrosion from brake fluid,using soft tube for easy releasing or loosen.
  • 【One Way Check Valve 】Prevents air being drawn into the system.
  • 【Easy to connect】：Simply and easy to connect with the clips to motorcycle clutch for bleeding..
  • 【Easy to bleed 】: Bleed motorcycle brakes fluid fastly with this brake bleeder hose..
  • 【Remark】:This motorcycle brake bleeder kit looks simple, but really a good helper to get the brake fluid out..
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock

6.0 Liter Brake Pump Pneumatic Fluid Oil Extractor Stainless Steel Oil Change Vacuum Fluid Extractor Pump for Any Vehicle Fluid Change Tool No Leaks Oil Extractor Pump

  • Work Freely and Widely -- Extract the engine oil, Brake fluid, ATF fluid and other non-corrosive and non-thick fluid of motorcycles and vehicles. Not....
  • Easy to Operate: The pneumatic way for higher speed of oil change.
  • just need to connect with air compressor. Easy to do the oil / fluid changing for....
  • Vehicle Fluid Removal Tool: At 6 liters of capacity, this fluid-extractor pump can be used for oil and fluid changes on most light and heavy duty....
  • Brake Bleeding Hose-- Makes your oil extractor multi-functional. One new brake oil silicon hose 4x8mm X 2 Meter (78.7 inch) with check valve to avoid....
  • Included components: Fluid Extractor 60" (1.5M) PVC Steel Braided Suction Hose 3/8" (9.5mm) x 17" (430mm) Dipstick Tube, 3/8" (9.5mm) x 30" (750mm)....
Check Stock

Mityvac MV6412 ATF Pneumatic Refill System; Air Operated, Services Sealed Automatic Transmissions with up to 2.5 Gallons of Fluid; Includes Quick-Change Style Accessory Connections

  • EASY OPERATION: Transmission Fluid is dispensed under pressure by pressurizing the reservoir with the built in hand pump for smooth continual flow. ON/OFF and flow control valve are conveniently located near fluid output..
  • ACCESSORIES: Includes ten (10) adapters to connect to Ford, Toyota, BMW, Honda, Nissan, VW, Audi, Mercedes and Volvo transmissions..
  • PRESSURE GAUGE: Integrated Pressure gauge indicates fluid dispensing pressure..
  • NO TOOLS NEEDED: The MV6412 utilizes push-to-connect, quick-change style accessory connections..
  • SOLID CONSTRUCTION: Internal pump components are sealed against exposure to fluids. This ATF refill system includes a custom-molded storage case for easy and safe storage of adapters..
Check Stock

Mityvac MV6410 Pneumatic Air Operated ATF Refill System for Filling or Topping Off Transmissions Adapters for Connecting to Popular Car Models

  • Includes ten adapters to connect to Ford, Toyota, BMW, Honda, Nissan, VW, Audi, Mercedes, and Volvo transmissions.
  • Large 1.2 gallon (5 liter) fluid capacity.
  • Fluid is dispensed under pressure for smooth continual flow.
  • Integrated manual pump adds air above the fluid level to prevent aeration.
  • 5 feet fluid dispensing hose with flow control and auto shut-off valves.
Check Stock

SWANLAKE Fluid Extractor, Extraction&Fill Pump,Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer (1500ML)

  • Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more..
  • Includes 1 transparent fluid syringe with locking adapter, 3adapters,2 hoses with locking cap on end, extension for deep reach and small diameter applications..
  • The hose attaches to quick-connect on the cylinder. Double seals for brake fluid and anti-freeze, assembled on the plunger..
  • Heavy-duty construction allows for strength and durability. A high quality handle help holding pump easily..
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ...ates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount of liquid. Stable base avoids dumping.
  • The main hose is 80" long, with a quick plug on one side to connect the container, and a quick coupler on the other side to connect the dipstick tubes or ATF adapters. There is a ball valve on the quick coupler to control the fluid flow, very convenient. Please note, there is no instruction in the kit, please refer to your vehicle operation instruction and following product description to operate. Your satisfaction and recognition are always what we pursue, please contact us to resolve any issue.
Check Stock

ABN Manual ATF Filler System – 3L Manual Transmission Fluid Pump Tool for Automatic Transmission with System Adapters

  • ...O LAST: Large 3-liter (101.4 oz) fluid container is made of thick plastic for durability and longevity and features 4 supports on its base to enhance stability while you work.
  • Pressure gauge can register up to 30 PSI and faces upwards for easy visibility.
  • 5.3 foot (1.6m) fluid dispensing hose features swivel thread connector to link to filler unit and a metal dispenser with a shut off valve.
  • Metal dispensing nozzle uses an easy-release locking mechanism to hold adapters in place securely.
  • CONVENIENT STORAGE SYSTEM: With so many little parts it might be easy to lose pieces, but the 21-inch hook and loop adapter belt and 14-inch (35.5 cm) extension band easily fit around the fluid transfer pump automotive filler system for easy organization when working or in storage.
  • 11 elastic slots hold the included transmission fluid fill adapters and more.
  • Included ATF adapters cover the most common transmission systems including DSG and CVT.
  • EASY TO USE: Open the filling cap and fill the unit using a funnel.
  • Use the correct adapter then insert into the transmission opening after draining used oil.
  • Use soft grip pump handle to pump liquid from the filler unit to the vehicle.
  • Pressure gauge helps to gauge how fast fluid will m....
Check Stock

Mityvac MV6400 1 Gallon Fluid Dispensing System for Topping Off Fluid Reservoirs, Master Cylinders Includes 5 ft. Hose with Wand and Flow Control Valve

  • The MV6400 is intended for filling reservoirs with fluids such as engine coolant, motor oil, or wiper, automatic transmission, brake or power steering fluid. However, with the proper accessories it can safely be used to pressure bleed hydraulic brake or clutch systems, or refill or top-off sealed automatic transmissions..
  • An integrated manual pump dispenses fluid by pressurizing the 1.2 gallon (5 liter) reservoir and Includes a thumb-operated tilt valve that is conveniently located for manual pressure relief and doubles as a safety valve to prevent over pressurization..
  • Fluid is continually dispensed as long as there is pressure in the reservoir and freeing up the operator’s hands.
  • pumping is only required to build additional pressure..
  • The pump tube is sealed to prevent exposure to chemicals and cleans easily between fluid changes..
  • For convenience and speed, push-to-connect, quick-change-style couplers are used at both ends of the fluid dispensing hose..
Check Stock

HORUSDY 200cc Fluid Extractor, Oil Extractor/Oil Syringe, Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer

  • Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more..
  • The pump includes two a 7-Inch by 1/4-Inch (outer diameter) hose extension for deep reach and small diameter applications, locking cap on end of hose and a 7.5-Inch/19-Centimeter clear hose..
  • The hose attaches to quick-connect on the cylinder. Double seals for brake fluid and anti-freeze, assembled on the plunger..
  • Heavy-duty construction allows for strength and durability..
Check Stock

SWANLAKE 200cc Fluid Extractor, Extraction&Fill Pump,Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer

  • Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more..
  • The pump includes two a 7-Inch by 1/4-Inch (outer diameter) hose extension for deep reach and small diameter applications, locking cap on end of hose and a 7.5-Inch/19-Centimeter clear hose..
  • The hose attaches to quick-connect on the cylinder. Double seals for brake fluid and anti-freeze, assembled on the plunger..
  • Heavy-duty construction allows for strength and durability..
Check Stock

SWANLAKE Fluid Extractor, Extraction&Fill Pump,Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer (500ML)

  • Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more..
  • The pump includes two a 7-Inch by 1/4-Inch (outer diameter) hose extension for deep reach and small diameter applications, locking cap on end of hose and a 7.5-Inch/19-Centimeter clear hose..
  • The hose attaches to quick-connect on the cylinder. Double seals for brake fluid and anti-freeze, assembled on the plunger..
  • Heavy-duty construction allows for strength and durability..
Check Stock

FTIHTRY 500CC Fluid Extractor, Extraction&Fill Pump,Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer

  • Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more..
  • The hose attaches to quick-connect on the cylinder. Double seals for brake fluid and anti-freeze, assembled on the plunger..
  • The pump includes two a 7-Inch by 1/4-Inch (outer diameter) hose extension for deep reach and small diameter applications, locking cap on end of hose and a 7.5-Inch/19-Centimeter clear hose..
  • Heavy-duty construction allows for strength and durability..
Check Stock