Reviews Flue Type Water Heate

TC-Home Natural Gas 16L Digital Display 4.2 GPM 32 KW Instant stainless steel Hot Water Heater

  • Gas Type: Natural Gas, Capacity:16L/min (4.2 GPM), 25 degrees warm water producing rate.
  • Working temperature:-8-45℃, Thermal input: 32 KW, Thermal efficiency: ≥80.8%,Temperature rise: 25℃.
  • High-quality stringy stainless steel panel, Copper water tank.
  • Minimum working water pressure: 0.025MPa,.
  • Gas pressure: 2000Pa, Gas inlet: G1/2'', Vent Type:4.3" Flue Duct.
Check Stock

TC-Home 10L Instant Hot LPG Water Heater 2.6 GPM Propane Gas Bath House Tankless Boiler Digital

  • Gas Type: LPG Liquid Petroleum Gas (PROPANE),Capacity:10L/min (2.6Gal), 25 degrees warm water producing rate.
  • SIZE: 13.4"(L) x5.7"(W) x23.2"(H), Working temperature:-8-45℃, Thermal input: 20KW,Thermal efficiency: ≥80%.
  • Temperature rise: 25℃, Minimum working water pressure: 0.025MPa, Gas pressure: 2800Pa, Automatic electric ignition powered by two (2) size 'D'....
  • Water Inlet: G1/2'',Water Outlet: G1/2'',Vent Type:4.2" Flue Duct.
  • Over water pressure protection function : to automatically decrease pressure under excessive high water pressure..
Check Stock

TC-Home 4.8 GPM Propane Gas LPG Instant Tankless Hot Water Heater Boiler House Bath (Propane Gas-18L)

  • Gas Type: LPG Liquid Petroleum Gas (PROPANE),Capacity: 18L/min (4.8Gal), 25 degrees warm water producing rate.
  • Working temperature:--8-45℃,Thermal input: 36KW,Thermal efficiency:≥80%,Vent Type:4.3" Flue Duct,Panel Color: White.
  • Temperature rise: 25℃,Minimum working water pressure: 0.025MPa,Gas pressure: 2800Pa.
  • Gas inlet: G1/2'', Water Inlet: G1/2'' , Water Outlet: G1/2''.
  • Automatic ignition system, Flame failure protection device,20 min. off self-timer,Gross weight: 8.5KG.
Check Stock

10L Propane Gas Tankless Water Heater LPG Outdoor 20KW 2.6 GPM Digital Display

  • 10L Tankless Water Heater, Gas Type: LPG Liquid Petroleum Gas (PROPANE), SIZE: 13.4"(L) x5.7"(W) x23.2"(H).
  • Working temperature: -8-45℃, Thermal input: 20KW, Thermal efficiency: ≥80%, Temperature rise: 25℃.
  • Minimum working water pressure: 0.025MPa, Gas pressure: 2800Pa.
  • Gas Pipe: G 1/2'' , Water Inlet: G1/2'', Water Outlet: G1/2'' , Vent Type: 4.3" Flue Duct.
  • 5) Fitted with over heating and pressure safeguard.
  • 8) Mains power not required (Electrical requirement: DC3V, Automatic electric ignition powered by two (2) size 'D' batteries (batteries not included).
Check Stock

TC-HOMENY 4.8GPM 18L Tankless LPG Liquid Propane Gas Hot Water Heater 36kw House Instant

  • Gas Type: LPG Liquid Petroleum Gas (PROPANE),Capacity: 18L/min (4.8Gal), 25 degrees warm water producing rate.
  • SIZE: 13.4"(L) x5"(W) x25.6"(H), product picture 2. Working temperature:--8-45℃, Thermal input: 36KW,Thermal efficiency:≥80%,Vent Type:4.3" Flue Duct,Panel Color: White.
  • Temperature rise: 25℃, Minimum working water pressure: 0.025MPa, Gas pressure: 2800Pa ( Please confirm the pressure before using the product.).
  • Automatic ignition system, Flame failure protection device,20 min. off self-timer,Gross weight: 8.5KG.
Check Stock

Best Design Chimney Flue Cleaning Rod Sweep Sweeping Brush Length 4 Rods Set Dry, Chimney Cleaning Brush - Chimney Cleaning Kit, Chimney Cleaning System, Soot Brush, Sweep Clean

  • ✔EXCELLENT MATERIAL: Professional for chimney flue cleaning rod sweep sweeping brush length 4 rods set dry, wear resistance, good storage, allows you to use for a long time.
  • ✔PRODUCT SPECIFICATIONS: Material: Nylon, Style: Scourer, Model Number: 201821414, Feature: Stocked, Type: Pipe brush chimney brush, Usage: Pipe brush chimney brush.
  • ✔CONVENIENT FOR USING: Safety design with protection cover chimney flue cleaning rod sweep sweeping brush length 4 rods set dry, After cleaning, You can go on keepping clean and convenient for your next use.
  • ✔EASY TO CLEAN: You can clean quickly. It can be cleaned and put into a cupboard. It does not occupy a lot of space and can be kept well.
  • ✔SEARCH IN MY STORE: chimney cleaning kit, chimney cleaning system, soot brush, sweep clean, chimney cleaning rods, chimney brush, flue sweep, chimney sweep kits, chimney sweeping supplies.
Check Stock

Replacement Combustion Chamber Kit Weil-McLain 66 68 68V 386-500-085 1060

  • KIT CONTAINS: Replaces Weil-McLain kit 386-500-085. Kit contains: rear refractory 591-000-060 wet pack, front refractory 591-000-061, floor blanket....
  • FIT: Fits all Weil-McLain 66, 68 (rear flue) & 68V (top flue) water and steam boilers. Fits all 66 series (A,P & B), inlcuding , 266, 366, 466, 566,....
  • SAVE TIME: Kits contain everything needed for the job in one box, saving time and simplifying ordering..
  • CAUTION: Protect this product from freezing to prevent damage to wet refractory..
  • SAFETY: See Important Safety Information below.
Check Stock

CHIMCARE Wind Directional Chimney Cap, 13\ x 13” High-Grade Stainless Steel Cap for Single Flue Tile, Downdraft Prevention, USA Made

  • TOP PERFORMANCE: Ultra-thick premium grade stainless steel with an advanced design, our Wind Directional Chimney Cap is a unique alternative to traditional fireplace weather cap - providing resistance to corrosion, bad weather and hostile flue gas..
  • ADVANCED CAP DESIGN: special design of the stainless steel cap forces wind around the top of the cap and does not let it enter the flue. It is designed to withstand high wind conditions, prevent the wind from going down your flue and causing cold downdrafts, and utilize the wind to create stronger updrafts..
  • UNMATCHED PROTECTION: It swivels to block the wind, prevents toxic smoke, twigs, leaves and other debris from entering your home and obstructing the chimney.
  • saving you money from costly repairs in the future. You can expect a better updraft the harder the wind blows..
  • SELECt YOUR SIZE: This chimney wind cap is designed to bolt onto the outside of your chimney flue tile. Measure from outside edge to outside edge - this is the size of your cap. It easily installs over a masonry clay flue tile. Wind directional chimney caps are also a common choice for factory-built metal chimneys. It will fit flue tiles up to 1” larger and 1.5” smaller than above dimensions..
Check Stock

CHIMCARE Black Galvanized Stainless Steel Chimney Cap, Powder Coated, 9” x 17” inch for Single Flue Tile, Removable Hood, USA Made…

  • 【PREMIUM MATERIAL】- Powder Coated Chimney Cap is made of the highest quality stainless steel.
  • to provide extensive durability and extended corrosion-resistance - allowing your cap to look new for over 15+ years.
  • 【UNMATCHED PROTECTION】- The fireplace chimney cap is ideal for keeping out rain, snow, leaves, debris, birds, animals etc that can cause damage to integrity of chimney, flue, and crown. Saving you money from costly repairs in the future.
  • 【EASY MOUNTING DESIGN】- designed to easily bolt-on to a masonry clay flue tile. To ensure you purchase the correct size - please see our instructions on how to measure the flue correctly from the outside edges of your flue tile. It will only fit Flue Tiles + or - 1.5” from Listed size.
  • 【SAFE & EFFICIENT】- acts as spark arrestor chimney cap, it prevents dangerous sparks from landing on your roof or nearby structures and reduces downdrafts. It has a removable hood for easy chimney cleaning.
  • 【MADE IN AMERICA】- Not all chimney caps are made the same - our caps are all custom-made here in the USA with a lifetime warranty.
Check Stock

CHIMCARE Black Galvanized Stainless Steel Chimney Cap, Powder Coated, 9” x 13” inch for Single Flue Tile, Removable Hood, USA Made…

  • PREMIUM MATERIAL: Powder Coated Fireplace Chimney Cap is made of the highest quality stainless steel.
  • to provide extensive durability and extended corrosion-resistance - allowing your cap to look new for over 15+ years..
  • UNMATCHED PROTECTION: The fireplace weather cap is ideal for keeping out rain, snow, leaves, debris, birds, animals etc that can cause damage to integrity of chimney, flue, and crown. Saving you money from costly repairs in the future..
  • EASY MOUNTING DESIGN: designed and engineered to easily bolt-on to a masonry clay flue tile. To ensure you purchase the correct size - please see our instructions on how to measure the flue correctly from the outside edges of your flue tile. It will only fit Flue Tiles + or - 1.5” from Listed size..
  • SAFE & EFFICIENT: Prevents dangerous sparks from landing on your roof or nearby structures and reduces downdrafts, causing smoke to enter the home. Fireplace chimney cap has a removable hood for easy chimney cleaning..
  • MADE IN AMERICA: Not all chimney caps are made the same - our stainless steel caps are all custom-made here in the USA with a lifetime warranty..
Check Stock

EternaBond EB-RB020-50R Roof Seal 2\ x50', Black

  • Designed & Engineered to Bolt-On to Existing Clay Flue Tile.
  • Fits a square flue size of 7 ½" x 11 ½" to 9 ½" x 13 ½".
  • Constructed of 100% 304 stainless Steel and built to withstand the toughest conditions.
  • Using slotted hex-head bolts, the unique corner mounting attachment design of a shelterpro chimney cover provides the securest possible fit to a masonry flue tile.
  • Lifetime limited warranty. Made in the USA..
Check Stock

9TRADING 18L Hot Water Heater Upgrade Type Natural Gas 5GPM On-Demand Boiler Shower

  • Feature: Natural Gas as the main energy material., 36KW 18L 4.8GPM tankless hot water heater., Modern fashionable line shape appearance., Digital display with shower head., Instant without waiting., Save a lot of space., Manifold auto protection., Adopt advanced energy-saving and combustion technology., High efficient energy saving., Automatic ignition system.,.
  • Flame failure protection device., Flame failure protection device., Over heat protection., Over water pressure protection function., Low water-pressure startup., Stable water flowing under high pressure..
  • Precautions: For the sake of your safety, please read following information carefully before using our products:, 1. Every type of gas water heater is only suitable for one kind gas. And our 18l tankless instant hot water heater uses Natural Gas., 2. Please read the instructions carefully before using the gas water heater, and in strict accordance with the instructions to use, maintenance of the water heaters.,.
  • 3. It is highly recommended to be installed by a professional., 4. Must be used under the condition of ventilation, ensuring the normal condition of the flue kit., 5. Please check the gas connection regularly to ensure there is no leaking risks..
  • Application: The gas water heater 18L-LNG....
Check Stock

Magicfour Fireplace Chimney Brushes for Chimney Sweep Kit, Premium Nylon Chimney Sweep Brush Head Replacement Accessories for Chimney Cleaning Kit

  • 【High-quality Nylon Rods】The chimney sweep kit is made of durable nylon material, which is flexible and chemically resistant. Each rod is 3.3ft in length, easy to disassemble and assemble, and will not damage the flue during use..
  • 【Widely Used】The chimney cleaning kit can easily clean small bends and 45-degree angles, straight to the corner. Chimney sweep tools can clean all shapes of metal or brick chimneys..
  • 【Ensure Safety】The chimney brush rotates at a high speed through the drill bit, which can effectively remove the oil fume and sediment in the flue or chimney, providing you with a clean and tidy chimney fireplace flue. It can effectively prevent flue fires and protect the safety of family members..
  • 【Package including】12 nylon rods, 1 high-density reinforced nylon rubber composite brush head, 1 drill adapter, 1 hex key, 1 glove, 1 sealing plastic sheet and 1 storage bag..
  • 【100% Guarantee】If the accessory is lost or the rod is broken, you can contact us at any time, we will provide you with replacement products for free. Please buy in trust..
Check Stock