Reviews Flow Switch Wire

Optimum Pool Technologies Replacement Flow Switch for Pentair IntelliChlor IC20 & IC40 Salt Cell - Replaces 520736

  • Replaces: Pentair Intellichlor Flow / Temp Switch Model Number 520736 (IC-20 & IC-40 Systems).
  • 4 Wire connection, Arrow on switch indications the direction of water flow, ensuring proper installation.
  • Manufactured by Optimum Pool Technologies. Please see product video for installation instructions..
  • Does not read salt level* This product ONLY fixes water FLOW and water TEMP issues with the IntelliChlor Salt Cells. THIS DOESN'T READ THE SALT LEVEL. THIS WILL NOT FIX A LOW SALT READING..
  • Refer to Troubleshooting Tips as well as Wiring Diagrams on this product page for product assistance. Red and Black/Blue wires detect the flow, White and Green wires read temperature. If replacing this flow switch doesn't fix the salt cell problem, it is likely that the whole cell needs to be replaced..
Check Stock

AIRTAK Bilge Pump for Boat DC12V 1500GPH Small Bilge Pump 12 Volt Electric Water Pump Low Noise with The Switch

  • Automatic mode connection :Contect black wire to negative,Contect brown white wire to positive,,brown no wiring.Non-Automatic mode connection :Contect black wire to negative,Contect brown wire to positive,,brown white no wiring..
  • Equipped with built in electronic controlled reed sensor system for easy fully automatic operation.
  • No power use until pump is activated by internal float switch (when water level rises).
  • Built-in float switch! (No separate float switch is needed).
Check Stock

Attwood 4608-7 Tsunami T800 Bilge Pump, 800 GPH, 12-Volt, Barbed ¾-Inch Diameter Outlet, 29-Inch Wire

  • What you will get: the package contains 1 piece of 12 V boat bilge water pump and 1 piece of automatic boat bilge pump float switch, nice combination for you to drain the water easily.
  • Basic parameters: the flow of the pump is 1100 gallons per hour, the flow rate is 1100 GPH, the voltage is 12 V DC, and the head is 13 ft (4mts).
  • Outlet diameter: 1-1/8 inch/ 29 mm, cable length: 3.3 ft/ 1 m.
  • The float switch's max amps 12 volts: 20 A.
  • The wire length is 3.3 ft/ 1 m, the wire gauge size is 18 AWG.
  • Electric bilge pump: the electric bilge pump is great for you to drain water efficiently, which has a good motor and help drain the water efficiently.
  • It is a good forhydraulic systems fed with cold water and can be applied in line to be fed by gravity or pressure.
  • Automatic boat bilge pump float switch: the float swith is automatic, it will turn the boat bilge pump on when water level reaches 2 inch (51 mm), and it will turn the pump off when water level reaches 0.7 inch (19 mm).
  • It is good flow sensor for bilge pumps, and it features with a removable base for easy cleaning.
  • Wide range of application: the boat bilge pump and automatic float switch can be applied for fishing boats, cruisers, runabouts, yachts and mo....
Check Stock

SeaSense Hand Bilge Pump Hose (24- Inch X 36- Inch)

  • Built-in float switch! (No separate float switch is needed).
  • No power use until pump is activated by internal float switch (when water level rises).
  • Equipped with built in electronic controlled reed sensor system for easy fully automatic operation.
Check Stock

Johnson Pump of America 28552 Marine Pump Cartridge for 500 GPH Motor, Black, one Size

  • Switch is removable from the base for easy cleaning..
  • Turn pump on when water level reaches 2 (51mm).
  • Turn pump off when water level reaches 0.7 (19mm)..
  • Long life, switching frequency up to 10 million times.
  • Ultrasonic welding, forming a seal, reliable and secure, not leaking..
  • Heavy duty flow switch is designed for the toughest applications.
Check Stock

ISURE MARINE 12V Automatic Submersible Boat Bilge Water Pump Latest styles 1200GPH Built-in Auto Float Switch (1200GPH)

  • Flow capacity: 750 Gallons per hour (2850 Liters per hour) - 47. 5 Liters per minute.
  • ⛵Maximum delivery head: 3. 8 meters (height of vertical water flow up pipe).
  • Dimensions: Length 145mm (5. 71") x Width 83mm (3. 27") x 103mm (4. 05").
  • ⛵Tough plastic body automatic bilge pump with built-in float switch. (No separate float switch is needed).
Check Stock

ECO-WORTHY 1100GPH 12V Marine Electric Bilge Pump for Boat Caravan RV Submersible Non-Automatic

  • Reliably provides bilge water pumping for larger recreational boats.
  • Meets automatic switch pump requirements for any vessels 20 feet and over with sleeping accommodations.
  • High capacity for larger boats and yachts.
  • Compact and durable package includes pump, wire seals, strainer, and mercury-free switch in one unit.
  • Installs quickly and easily in tight spaces, mounts horizontally only.
  • 12-volt, 1.5-amp draw pump is rated for 1100 GPH performance at open flow (at voltage of 13.6 volts DC).
  • Comes with a 29-inch length of 16-gauge caulked and tinned copper wire, and uses a 1-1/8”-inch interior diameter hose.
Check Stock

MAXZONE Automatic Submersible Boat Bilge Water Pump 12v 1100gph Auto with Float Switch Blue - Automatic

  • Outlet Diameter: 29mm/ 1.14 Inch (1-1/8").
  • Built-in float switch! (No separate float switch is needed).
  • No power use until pump is activated by internal float switch (when water level rises).
  • Equipped with built in electronic controlled reed sensor system for easy fully automatic operation.
Check Stock

DC HOUSE 42-Series Upgrade Water Diaphragm Pressure Pump, 5.0 GPM 55 PSI 12V DC Self Priming Water Pump for RV Caravan Marine Yacht

  • Switch is removable from the base for easy cleaning..
  • Turn pump on when water level reaches 2” (51mm).
  • Turn pump off when water level reaches 0.7” (19mm)..
  • Long life, switching frequency up to 10 million times.
  • Ultrasonic welding, forming a seal, reliable and secure, not leaking..
  • Heavy duty flow switch is designed for the toughest applications.
Check Stock

CR Magnetics CR9380-PNP-M PNP Transistor Output Split Core Current Switch with Mounting Case, Normally Open, 30 VDC

  • Current switch for monitoring current flow.
  • Current carrying wire is routed through an aperture.
  • Electrically isolated normally open (NO) switch.
Check Stock

Amarine Made Bilge Pump for Boat Automatic Submersible 12V 1100GPH Bilge Water Pump with Float Switch

  • Compact, automatic, fully submersible electric pump.
  • Built-in float switch! (No separate float switch is needed).
  • Equipped with built in electronic controlled reed sensor system for easy fully automatic operation.
  • No power use until pump is activated by internal float switch (when water level rises).
Check Stock

AMRM-4505-7 Attwood Sahara Automatic Bilge Pump - 500 GPH

  • The Attwood Sahara Bilge Pump is a durable, compact, and easy to install automatic bilge pump. The Sahara has everything contained in one compact yet durable package, making this pump a great option for tight spaces. This series of bilge pump features a 316 stainless steel motor shaft for corrosion resistance and a durable high-impact, glass-filled polyester impeller. The base of the pump has quick, one-handed removal for easy disassembly for cleaning..
  • Pumps include 36" lengths of 16-gauge caulked and tinned copper wire. An automatic-switch bilge pump is a requirement for any vessels 20’ especially those that accommodate overnight passengers and crew. All Attwood bilge pumps come with a 3 year manufacturer's warranty..
  • Mercury-free switch. Test knob for easy operational check Non-restrictive float movement. Larger filter area resists clogging.
  • Free flow of water around housing keeps motor cool. 316 Stainless Steel motor shaft for saltwater corrosion resistance. Durable high-impact, glass-filled polyester impeller.
  • Sahara S500 Part #: AMRA-4505-7, GPH at Open Flow: 500, GPH at 3.3' Head: 350, Hose Size: 3/4" I.D..
Check Stock

WAYNE PC4 1/2 HP Cast Iron Multi-Purpose Pump With Suction Strainer, Model:55832

  • 【Main Parameter】 - G 1׾ inch, Size of union and flow switch: G 1 inch to ¾ inch. Voltage/Frequency: 115V, 60Hz. Rated power: 46/67/93W. Flow: 50LPM (11GPM). Max head: 6m (20ft). Pump housing: Cast iron. Impeller: PP. Motor wire: 100% copper. Shaft: stainless steel..
  • 【Design Advantage】 - The home water pressure booster features high efficiency with low consumption. High-temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly, saving energy, running power, reducing the waste of cold water and waiting time..
  • 【Three Power Adjustments】 - This home booster pump has a 3-speed switch to adjusts to your needs, Increase the pressure of the household water tank and can be used directly in drinking water pipelines (The water taste of lubricating oil will disappear after 3 to 5 times of use)..
  • 【Easy To Installation】 - Just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers, the shaft of the pump should be kept horizontal after installation.
  • Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water..
  • 【Applicable】 - Our shower booster pump specially designed for the bathroom, kitchen, household, garden, pond, irr....
Check Stock