Reviews Flow Meter Indicator

BTMETER BT-866A Pro Handheld HVAC Anemometer for CFM Air Flow, Wind Speed Meter Gauge Measures Wind Velocity Temp %RH Dew Point with USB Sync to PC

  • ...od for hands-free operation. Support to connect the wind meter to computer via USB port, for monitor and record wind speeds, temperature, CFM air flow and RH, perfect for balancing air flow in HVAC tasks such as: duct vents, AC air output testing.
  • ★【Portable Anemometer】 It’s a handheld pocket size wind speed indicator comes with protective case, Large Backlit screen, Low battery indicator and auto shut down to save the battery. Portable for indoor and outdoor wind measurements,such as: Long range shooting,Boat Sailing, Kite flying, Climbing, Drone driving,Vent, turbine air flow testing etc..
  • ★【Tips for Wind Temp %RH Testing 】 The temperature sensors are inside the left and right holes, to shade them from sunlight to assure the wind reading are for the air flowing through the holes. So without air flow, the temp and %RH reading WON’T change rapidly, they’ll change slowly..
Check Stock

BTMETER Digital Anemometer Barometer Handheld, for Wind Speed Temperature Wind Chill Tester w/Humidity, Altitude, Barometric Pressure Meter for Climbing Drone HVAC CFM BT-100WM

  • ➤【MULTIFUNCTION ANEMOMETER】BT100WM wind speed gauge meter measures not only Wind Speed, Wind Temp, Wind Chill Indicator, but also Relative Humidity, Dew Point, Barometric Pressure and Altitude. With data log, Tripod hole for mounting, it’s ideal for outdoor activities:Long Range shooting, Hunting, Sailing, Kite flying, Drone Driving, CFM air flow test..
  • ➤【HIGH PRECISION】Digital wind meter for measure wind speed range 0.67 ~ 67.1 mph( +/- 5% accuracy).
  • Wind temperature range -10~45℃,14℉-113℉(+/-2 ℃/℉).
  • Wind meter measurement altitude from 0-19685 Ft. Resolution: 0.2 mph, 0.2℉,0.1% RH. So you can be rest assured to get fast and accurate reading..
  • ➤【EASY TO USE】Measures different readings such as Max, Min, Average, Current Wind Speed, display in 5 units: mph, ft/min, km/h, m/s or knots. Temperature (Celsius/Fahrenheit), Elevation(M, Ft), Atmospheric pressure(inHg, hpa mbar). And LCD backlit screen makes it easy to read in day or at night..
  • ➤【LOG THE BAROMETER DATA】This handheld wind speed meter can also log 16 groups of barometric pressure data for record, compare and analyse the relationship between temperature, humidity, and height. It’s compact pocket sized Pro anemometer for weather station, long distance shootin....
Check Stock

BTMETER BT-100 Handheld Anemometer Digital Wind Speed CFM Meter Gauge Air Flow Velocity Tester for HVAC Shooting Drone Wind Chill 14℉-113℉ Wind Temperature

  • 【Multifunction Pro Anemometer】Wind Speed, Wind Temperature, Wind Chill, Low battery indicator on bright backlit LCD screen. BT-100 is a portable wind speed guages can accurately measure air speed in 5 units: m/s, km/h, ft/min, knots, mph. Wind Temp in ℃/℉(Degree Celsius/Fahrenheit).
  • 【Accurate Wind Meter】Wind Speed Meter for measuring wind speed range 0.67~67.1 mph(+/- 2% of readings), Wind temperature -10~60℃,14℉-113℉(+/-2℃,35.6℉).
  • 0.2℃. 2 temp sensors and 8 vanes makes this air velocity meter is sensitive to measure very low air flow in HVAC installation, duct vent. A good helper in CFM calculation..
Check Stock

PC Water Cooling Flow Meter Flow Indicator LED Thermometer Flow Rate 5V LED All-in-one Kit Liquid Cooling Tool (Black + Aura Effect Lights)

  • This is a water cooling tools combine 4 functions: flow meter, flow indicator, thermometer and flow rate. It only displays the temperature in degree centigrade..
  • To save the space in the computer case and to provide you more options to the other components for limited space..
  • Plug and play. 5v 3pin power connectors..
  • The RBW aura effect LED lights assembled..
Check Stock

ANNMETER Pro HVAC Anemometer- Air Flow Velocity Meter AN-826A 0.001~100Mph Wind Speed Gauge,Handheld Wind Tester Measuring Airflow Movement Temp with Max AVG Current

  • 【CFM Anemometer】Built with lightweight vane sensor to ensure sensitivity for accurate air flow measurement, Extendable cable and wand can extend to 79 inches, makes this cfm wind speed meter tester can easily reach to air outlet of AC, Vent..
  • 【Pro Airflow Air Velocity Meter】-Accurately measure wind speed ranging from 0.001~100Mph (+/- 5% of reading), wind temperature from 14~113℉(+/- 1.8℉). 5 wind speed units optional: m/s, Ft/min, Knots, Km/hr, Mph.
  • 【Wide Applications Wind Detector】-Handheld wind indicator not only can be applied in HVAC system installation and checking, dust vent detection, air conditioner maintenance, but also for outdoor activities: hiking, camping, boat sailing, sky surfing, shooting, drone Flying..
  • 【Humanize Designed Anemometer】-For continuous measurement, you can fix the gauge on a tripod with the thread hole at the bottom. Auto/ Manual power off function for battery saving. Backlight LCD provides clear reading in darkness or dim place..
  • 【Must Have One Air Flow Meter】-A solid storage case comes with AN-826A, for easy carrying and protecting damage from transport. Buy with confidence! For product defective or any further problem, ANNMETER provides you unconditional warranty!.
Check Stock

Horiba 9096001700 Plastic Body PH Electrode

  • Modular design makes it suitable for use with output modules, sensors and remote transmitters.Compact structure, easy to install.Intuitive clear reading, high reliability, measuring accuracy is ±1%.High-definition displays show both instantaneous and cumulative flow.Can be widely used to measure diesel, kerosene, gasoline, etc..
  • This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters..
  • Malfunction and solution:The flow meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely..
  • 4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly 6. Too close to the motor or electronic noise environment.
  • The meter can not calibrate. 1. Circuit board is break down. Replace the circuit board. 2. Button is fail to press. Replace the circuit board..
Check Stock

Flow Meter Indicator PC Cooler System, Rust-Proof Soft Tubing Fittings Liquid Cooling PC Water Flow Indicator, G1/4 Threaded Cooling Flow Indicator for PC Computer Water Cooling System(Black)

  • ♨【Water Cooling Systems】---This black Flow Indicator is made of high quality materials, anti-rust and durability, can be used for a long time..
  • ♨【PC Liquid Cooling】---The PC Water Cooling uses standard G1 / 4 threads that matches the G1 / 4 water tubes on the market. Don't worry about the connection between components, reduce troubles..
  • ♨【Water Cooled Computer】---This Flow Indicator is connected, with perfect airtight, made of Aluminum + Stainless Steel + PMMA material, Sturdy and Durable, Safe To Use, Good Heat Dissipation..
  • ♨【Useful Accessories】---For replacing the water flow meter on the computer water cooling.Easy to install and use, can help you check the condition of the cooling system..
  • ♨【After-sales Service】---In order to eliminate your worries, we will provide you with a 12-month quality guarantee from the date of purchase. In the process of using, if you have any questions or interesting discoveries, please feel free to contact us, we will provide you with quality services..
Check Stock

BTMETER BT-856A Pro CFM Anemometer Measures Wind Speed, Wind Flow, Wind Temp for HVAC Air Flow Velocity Meter with USB

  • ...SB port (Win 7,XP,10), to monitor and record wind data, such as: speeds, temp, air volume, data, time. Perfect HVAC anemometer for CFM CMM measurement, CPU computer fans, air conditioner, air blower air velocity of dust pipe, tunnel,etc.
  • ➤【Easy to use】1.69 x 2.36’’ large backlit display with beaufort scale indicator makes it easy to read, Low power indicator to remind you change the battery in time. Comes with portable case makes it easy to carry around..
  • ➤【Auto Power OFF】Manual or Auto shut down after 5 mins without operation to save your battery. 9V battery included, 365 days warranty. Add to Cart, Buy it, Use it, for any quality problems, we’ll replace you..
Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

  • FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
  • MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
  • HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
  • INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
  • MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
Check Stock

CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)

  • FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
  • TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
  • ③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
  • ⑥ max temp of tested liquid: 158°F/70°C.
  • MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
  • NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
  • WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..
Check Stock

48V Battery Fuel Gauge Indicator, Golf Cart, Yamaha,EZGO, Fork Lifts,Club Car,LED Battery Indicator Meter Gauge

  • 【48V Battery Fuel Gauge】The 48 Volt Led Battery Meter compatible with Golf Cart Club Car EZGO Yamaha 48 Volt LED Battery Gauge Meter, Works with 48V Lead-Acid Batteries in Golf Carts, Forklifts, Trucks, Scooters and More..
  • 【LED Battery Indicator Meter】10 segment LED Bar Graph display, 10% per segment：3 color LED display,different light displays different battery level visually.
  • LED flash for low charge&high charge warning.
  • 【Note】The second LED from the left flashes as a warning that the batteries voltage has been discharged to 80% of their capacity.It is strongly recommended to recharge the batteries when you get to the 3rd Yellow LED, this is a safety precaution to avoid dead batteries.
  • 【 Installation Notes】Make sure your "C" terminal is either connected to the Battery "+" or a Key switch, Meter will scan from full to empty then shuts off .Meter will stay full position while first is connected with batteries and indicate the actual battery level after 155 seconds..
  • 【 Battery Indicator】The 48V Battery Indicator is made of high quality ABS material, waterproof, heat resistant, reliable performance.Displayed with 10 segment LED bar graph (1 Red, 2 Yellow and 7 Green LED), different light displays different battery level..
Check Stock

AstroAI Digital Clamp Meter Multimeter 2000 Counts Amp Voltage Tester Auto-ranging with AC/DC Voltage, AC Current, Resistance, Capacitance, Continuity, Live Wire Test, Non-contact Voltage Detection

  • ...ool for solving industrial and household electrical issues.
  • Large Jaw Opening: The jaw opening measures AC current in a conductor without touching or interrupting the circuit. Its slim and compact size makes it easy to operate in narrow spaces.
  • Thoughtful Design: Support Data Hold, Max/Min, Auto Shut-off, low battery indicator and continuity buzzer. Includes Convenient features like Audial and Visual Alarm, LCD Backlit Screen and Flashlight make it easy to use. Two 1.5V AAA batteries are included in the package.
  • Non-contact Voltage Testing: This Clamp Meter features non-contact voltage testing with sound and light alarm. When the Meter senses a weak AC signal, the green indicator light will come on and the buzzer will emit a slow, audible beep. when the Meter senses a strong AC signal, the red indicator light will come on and the buzzer will emit a quick beep.
  • Additional Tips: The clamp meter has passed the environmental pollution degree 2 and overvoltage category III 600V safety standards. Combined with Amazon's excellent delivery, we provide lifetime technical support..
Check Stock

AstroAI Digital Clamp Meter Multimeter 4000 Counts Auto-ranging Amp Voltage Tester Measuring AC/DC Voltage & Current Resistance Capacitance Frequency Continuity Live Wire Test NCV Detection

  • ...Cycle, Resistance, Diode, Continuity and Live Wire Tests. This clamp meter is a really useful tool for solving industrial and household electrical issues..
  • Non-contact Voltage Testing: This Clamp Meter features non-contact voltage testing with sound and light alarms. When the Meter senses a weak AC signal, the green indicator light will come on and the buzzer will emit a slow, audible beep. when the Meter senses a strong AC signal, the red indicator light will come on and the buzzer will emit a brief beep.
  • Multifunctional & Easy to read: Support Data Hold, Max/Min, Auto power off after 15 minutes inactivity, low battery indicator and continuity buzzer. The LCD Backlit Screen and Flashlight make it easy to use in a dark working area. ZERO function decreases the data error influenced by the Earth’s magnetic field, and helps you to obtain a more accurate measurement..
  • Large Jaw Opening: The jaw opening measures current in a conductor without touching or interrupting the circuit. Its slim and compact size makes it easy to operate in narrow spaces..
  • Additional Tips: This clamp meter has passed the environmental pollution test degree 2 and overvoltage category III 600V safety standards. Combined with Amazon's excellent delivery, we provide lifetime techn....
Check Stock