Reviews Floor Cutting Machine

MantisTol 8.9

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. You need to know that this can only cut vinyl plank, not laminate floor or wood floor!!!No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • " L & " cut and Lengthwise cut (Solve the installation of wall and corner). Clearly marked measuide. 0-45 Angle Cutting, Cutting max.depth 8mm.Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around, you will like it.
  • 2.2mm thick 9 length tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 2000 square feet), Otherwise it will quickly end the service lifethis is a man-made damage and is not covered by the warranty! Or replace blade..
  • Angle Cutting: 0 - 45 inch 160mm wide plank.
Check Stock

3 Inch Mini Angle Grinder Cordless 12V Lithium Li-ion Power Cutting Grinding Machine

  • The body of the mini angle grinder is made of high-quality plastic material, and the installation place of the protective cover and cutting blade is....
  • The 3-inch fuselage makes it very flexible in your hands,even if you work in a place not close to the power supply, you will not worry about the plug....
  • Our Rechargeable Angle Grinder machine is battery-powered, you are worry-free about the power supply, which is suitable for outdoor work..
  • Easy Operation: We have attached an instruction manual, and the angle grinder is easy to use and install. You can quickly start your work after a few....
  • Wide Application: This angle grinder polishing machine is widely used: floor cutting, ceramic tile cutting, etc. Also used for metal....
Check Stock

Goplus 48-Inch Manual Tile Cutter, Professional Porcelain Ceramic Floor Tile Cutter with Tungsten Carbide Cutting Wheel, Removable Scale and 4 Adjustable Brackets

  • 【Cut Ceramic Porcelain with Great Precision】Tile cutting accuracy takes priority in the design of this machine, which is delicately crafted with tungsten carbide cutting wheel, to deliver quick, sharp and clean cutting outcome. It comes with a measuring scale and linear bearing as well, intended to enhance the cutting accuracy to higher level..
  • 【Suitable for a Variety of Tiles】The tile cutter is capable of cutting different kinds of tiles in either parallel or Angled (from 0 ° to 60 °) way, suitable for ceramic tiles, porcelain tiles, floor tiles, etc. Its maximum cutting length is 48 inch and maximum thickness is 0.62inch (16mm). More, 4 adjustable side brackets helps keep large tile stable, in case of wobbling..
  • 【Simplify the Cutting Procession】You will be skillful in using this machine sooner than you expect, thanks to its simple enough design. Also, smooth metal slide rail makes the cutting as smooth as possible when you cut the tile straightly, while the ergonomic handle provides a comfortable gripping feeling..
  • 【Strong Welding Structure for Durable Use】Exquisite craftsmanship enables a super strong welding structure, leaving you no worry about using safety. Thickened base offers higher resistance to pressure and shows perfect per....
Check Stock

BIHOO Mini Angle Grinder,12V Cordless Metal Cutter Machine for Grinding,Cutting with Two Battery

  • 【High-Quality】This mini cordless angle grinder uses diamond cutting wheels. It consists of hundreds of very sharp teeth that quickly remove sawdust and are more durable than hundreds of sandpaper pads..
  • 【Cordless & Compact】The 3-inch fuselage makes it very flexible in your hands,even if you work in a place not close to the power supply, you will not worry about the plug problem,because it does not need to be plugged in to work.It also provide fast material removal, save your time and energy..
  • 【Large Capacity Battery Pack】Our Rechargeable Angle Grinder machine is battery-powered, you are worry-free about the power supply, which is suitable for outdoor work. Is equipped with 2 Pack 2000mAh lithium batteries and fast charger. Lithium-ion batteries with self-overload and temperature protection provide a much longer battery life..
  • 【Safety Protection and Persistence】 During operation, the protective cover of the portable grinder can prevent sparks and metal shavings during use, thereby protecting you from injury..
  • 【Wide Application】 This angle grinder polishing machine is widely used: floor cutting, ceramic tile cutting, etc. Also used for metal grinding,polishing and cutting..
Check Stock

SaferCCTV 4Pcs Countersink Drill Bit Set 8pcs Wood Plug Cutter Drill Bit Set for Tapered 5/8 1/2 3/8 1/4 Woodworking Cork Drill Bit Knife

  • Wood plug cutter cutting set dowel maker cutting tools. High quality metal, use pay attention to rest, avoid burning knife, Oil can prolong life.....
  • Countersink Drill Bit Set: 4 Sizes in one drill bit set( 6#,8#,10#,12#), which meet your different needs perfectly.
  • Wood plug cutter drill bit apply to with a clamp or joint drilling machine, suitable for drilling in the hard wood and wood floor, machine screw for....
  • 8pcs Wood Plug Cutter Cutting Tool Drill Bit Set Uses: for bench drill and hand drill, recommended bench drill, easy to center.
  • Unique service can make you rest assured to buy--(1)Warranty 14 months, a warranty system, to provide repair parts. (2) Professional sellers, and....
Check Stock

MANTISTOL 13

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty..
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time. If you received the cutter that cuts less than 8mm thick, please remove the blade, clean the aluminum shavings in the groove, and then assemble the blade correctly in the center of the blade bar..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • 13" cutting width and 8mm cutting depth. Straight cut, Angle cut.
  • " L & " cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45 Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around..
  • 2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service lifeman-made damage is not covered by th....
Check Stock

yeshine T-Shaped Glass Cutting Tool, Tile Cutters, Automatic Control Oiling, Nylon Pulley, 120cm Thickened Aluminum Alloy Blade Bar, Hard Steel Scale, for Thick Glass, T-Glass and Tile Cutting

  • 【Professional porcelain/glass cutting machine】: Professional manual tile and glass cutting machine, easy and convenient to operate, no electricity, no dust, no noise, easy to do the cutting of floor tiles, tiles and glass even indoors..
  • 【Sturdy structure】: Thickened and thickened knife bar with six sides, not easy to deformation, with steel scale (starting scale: 8 cm), computer laser engraved scale, minimum accuracy of 1 mm, clearly visible, accurate and error-free, scale is not easy to blur..
  • 【 Automatic oiling system】: Automatic oiling when in use, stop oiling when not in use. (Be sure to fill the oil pot with kerosene before use, so as not to damage the cutter head with the glass).
  • 【High-quality durable cutter wheel】: Support 3-12 mm thickness of glass, tile cutting, the maximum cutting width of 120 cm / 47.24 inches (strictly prohibited to hit the cutter wheel).
  • 【Nylon pulley】: Extra-long T-type glass knife knife seat with 20 nylon pulley, fully enclosed precision bearings, rust-proof, cutting process does not jump, smooth sliding, nylon pulley, durable, the use of ordinary ABS material pulley 3 times..
Check Stock

Goplus 24 Inch Tile Cutter, Professional Manual Tile Cutter for Ceramic, Porcelain Tiles, Floor Tile Cutter with Tungsten Carbide Cutting Wheel, Ergonomic Handle, Anti-skid Feet & Removable Scale

  • 【Smooth & Accurate Cutting】Replaceable 7/8-inch titanium-plated tungsten carbide cutting wheel makes cutting smooth and durable. It is equipped with a carriage system with bearing to assure perfect sliding. In addition, it includes a removable scale that allows parallel and angled cuts (0°-60°) for precision cutting..
  • 【Suitable for All Kinds of Tiles】The manual tile cutter cuts ceramic tiles up to 24-inch (length) and 16-inch diagonally, perfect for ceramic tiles, porcelain tiles, floor tiles, etc. The cutting thickness of this professional tile cutter is from 0.2'' to 0.47'' (5mm-12mm). Ideal for professional installers or beginners who are looking for a versatile tile cutter..
  • 【Heavy Duty Iron Frame】The frame of this cutting machine is made from heavy iron material, which is strong and durable. This gives the structure needed stability and sturdiness, guaranteeing that it will not easily turn over. In addition, two solid rails are strong and not easy to bend, making cutting work more accurate and suitable for long-term use..
  • 【Ergonomic Design】This tile cutter is ergonomically designed. The curved handle design makes it easier to press the tile, while the non-slip plastic grip increases the comfort of the cutting process. Wide an....
Check Stock

Manual Tile Cutter 24 Inch Floor Tile Cutter with Alloy Cutting Wheel, Ergonomic Rubber Handles Double Rails Extensions to Support Large-Format Tiles

  • ...tter is built with all-aluminum high-end material which is strong and durable!Exquisite craftsmanship enables a super strong welding structure,providing perfect performance in stability!0-180°adjustable shock-resistant support feet on both sides are used to support larger format tiles and ensure the stability when cutting!Thickened and widen aluminum alloy base with non-slip rubber pad offers additional stability for large tile and higher resistance to pressure.
  • 【Precise & Smooth Cutting】Tile cutting accuracy takes priority in the design of this ceramic tile cutter!Equipped with laser positioning for accurate cuttings.The premium tungsten carbide cutting wheel with deep groove ball bearings deliver quicker,sharper and cleaner cutting outcome!It not only achieves smooth cutting but also ensures the smooth cutting surface of the tile!In addition,it includes an adjustable scale to fix the tiles and enhance the cutting accuracy to higher level!.
  • 【High-efficiency & Labor-saving Cutting】A large and high-leverage bicycle handle with a nonslip rubber grip is designed to make cutting easier while providing a comfortable gripping feeling!Meanwhile dual chrome-plated rugged steel rails make the scoring and cutting as smooth as possible when you push this....
Check Stock

WORKPRO 13\ Laminate Floor Cutter, Vinyl Floor Cutter for Laminate, Multi-layer Flooring, Parquet, Fiber Cement Wall Panels, Rubber Concave Base, LVT, VCT, SPC, LVP, WPC and Vinyl Plank

  • 【Multiple Cutting Materials】 This floor cutter can cut laminate floor, vinyl plank, multi-layer flooring, bamboo and wood panels, parquet, fiber cement wall panels, rubber concave base, LVT, VCT, SPC, LVP, WPC. Floor cutting up to 13” wide and 5/8” thick.
  • 【Sturdy Aluminum and Sharp Tungsten Steel Blade】 ABS material cutting table and aluminum construction make the vinyl floor cutter strong and durable. With the sharp tungsten steel blade, it can cut faster and smoother.
  • 【Safe and Extra Accessories】 A chain to keep you safe while not using the laminate floor cutter. The graduated scale with metric and imperial scale can meet your need for different cutting, and you can choose the angles of 22.5°, 30°, and 45°.
  • 【Labor-saving and Comfortable Handle】 The telescopic rubber-covered handle allows you to use this lvp flooring cutter with less effort and a more comfortable grip.
  • 【Easy to Move】 Floor cutter with wheels makes your cutting job easier, you can move it without much effort. The quiet operation of the wheels provides you with a pleasing atmosphere.
Check Stock

Nisorpa Professional Manual Tile Cutter Heavy Duty 630MM 25inch Wall Flooring Ceramic Tiles Cutting Machine For Porcelain Parallel and Angled Hand Tools

  • Nisorpa Professional Ceramic Tile Cutter can cut floor wall tiles, such as ceramic porcelain marble, Maximum Cutting Thickness 14mm/0.55inch,Effective Cutting Length 630mm/25inch.
  • The angle can be adjusted from left to right (0~45°). High material utilization and no cutting loss. Separated only once to have a neat incision..
  • The graduated scale is precise and uniform in size. Fine measurements can be made when cutting tiles, ensuring that each data of every piece is accurate..
  • Easy to install, save time and effort. Free-standing telescopic platform device, no need to use electricity..
  • The back nut fixing, better adjustment of machine head, suitable for glass of different thickness. The handle stretches smoothly, improving work efficiency..
Check Stock

WORKPRO Laminate Floor Cutter With Work Knee Pads

  • Multiple Cutting Materials: This floor cutter can cut laminate floor, vinyl plank, multi-layer flooring, bamboo and wood panels, parquet, fiber cement wall panels, rubber concave base, LVT, VCT, SPC, LVP, WPC. Floor cutting up to 13” wide and 5/8” thick.
  • Sturdy Aluminum and Sharp Tungsten Steel Blade: ABS material cutting table and aluminum construction make the vinyl floor cutter strong and durable. With the sharp tungsten steel blade, it can cut faster and smoother.
  • Sturdy Pads: The heavy-duty and non-slip shields are big enough to cover your knees completely, which can protect against cuts or scrapes from the stone, nails, glass shards faithfully.
  • Ergonomic protection: The soft gel core and thick EVA foam padding cushion can provide extra knees support. Helps reduce knee pressure from heavy work on hard floor or concrete.
  • Reinforced Stitching: The excellent stitching process with nylon threads ensures long-lasting durability of shell, gel and foam. The durable knee pads can ensures long-lasting safety of knees.
Check Stock

Wall Grooving Machine Channels Cutter Concrete Cutting Machine for Cutting Slotting Marble Concrete Grooves 110V Red

  • Concrete Cutting Machine - designed to carve into masonry&concrete a small channel to insert a metal or plastic conduit for electrical wiring.
  • Machine Parameter- Voltage: 110v, Powder: 4800w, Channel width: 1.65"(adjustable)，Channel depth: 0-1.57" (adjustable)，Length the cable: 3m.
  • Easy use - Machine weight 6.2kg，the handle can be rotated as required. Equipped with infrared locator, you can use infrared positioning in advance....
  • Certified Safe - Adopt high power copper electromechanical, Maximum load power 5500w,with leakage protection function. Dust catcher (Need to buy) and....
  • Wide application - This Wall slotting machine can used for decoration and industrial wall/floor grooves.You can cut grooves in concrete, brick,....
Check Stock