Reviews Float Switches For Bilge Pumps

Bilge Float Switch, Huazu Automatic Bilge Pump Float Switch Rule Float Switch DC 12V 24V 32V for Boats Ignition Protected Mercury Free

  • DURABLE: The shell of bilge pump float switch is made of high-quality ABS material, which has high strength and durability, and the internal metal contacts ensure reliable start/stop. The switch can be removed from the base for easy cleaning and servicing..
  • USE WITH PUMPS: The bilge float switch is automatic and can be connected to various submersible pumps, bilge pumps, and water pumps. Turn the pump on when the water level reaches 2″ (51mm) and turn off the pump when the water level reaches 3/4″ (19mm)..
  • PERFORMANCE: The switching frequency is up to 10 million times, which can be used for a long time.
  • ultrasonic welding forms a seal, reliable and safe, not leaking..
  • SPECIFICATION: Max Amps 12volts: 20A / Max Amps 24volts: 10A / Max Amps 32volts: 8A.
  • WIDE APPLICATION: This automatic float switch can be widely used in fishing boats, cruisers, runabouts, yachts, aquariums, small swimming pools, water reservoirs, fountains and other places that need drain the water..
Check Stock

Attwood 4608-7 Tsunami T800 Bilge Pump, 800 GPH, 12-Volt, Barbed ¾-Inch Diameter Outlet, 29-Inch Wire

  • What you will get: the package contains 1 piece of 12 V boat bilge water pump and 1 piece of automatic boat bilge pump float switch, nice combination for you to drain the water easily.
  • Basic parameters: the flow of the pump is 1100 gallons per hour, the flow rate is 1100 GPH, the voltage is 12 V DC, and the head is 13 ft (4mts).
  • Outlet diameter: 1-1/8 inch/ 29 mm, cable length: 3.3 ft/ 1 m.
  • The float switch's max amps 12 volts: 20 A.
  • The wire length is 3.3 ft/ 1 m, the wire gauge size is 18 AWG.
  • Electric bilge pump: the electric bilge pump is great for you to drain water efficiently, which has a good motor and help drain the water efficiently.
  • It is a good forhydraulic systems fed with cold water and can be applied in line to be fed by gravity or pressure.
  • Automatic boat bilge pump float switch: the float swith is automatic, it will turn the boat bilge pump on when water level reaches 2 inch (51 mm), and it will turn the pump off when water level reaches 0.7 inch (19 mm).
  • It is good flow sensor for bilge pumps, and it features with a removable base for easy cleaning.
  • Wide range of application: the boat bilge pump and automatic float switch can be applied for fishing boats, cruisers, runabouts, yachts and mo....
Check Stock

creatorele DC 12V 24V 32V Automatic Boat Bilge Float Switch Bilge Switches Flow Sensor for Automatic Electric Water Pump

  • 【Bilge Float Switch】:Can be connected to various submersible pumps, bilge pumps,and water pumps .Shells made of high quality ABS material, the internal metal contacts to ensure reliable start / stop..
  • 【Use with pumps】:Turn pump on when water level reaches 2″(51mm).
  • Turn pump off when water level reaches 3/4″(19mm)..
  • 【Performance】:Long life, switching frequency up to 10 million times.
  • Ultrasonic welding, forming a seal, reliable and secure, not leaking..
  • 【Specification】:Max Amps 12volts: 20A / Max Amps 24volts: 10A / Max Amps 32volts: 8A.
  • 【Easy to Clean】:Ideal flow sensor for bilge pumps Latest design includes a removable base for easy cleaning and servicing..
Check Stock

AMRM-4505-7 Attwood Sahara Automatic Bilge Pump - 500 GPH

  • The Attwood Sahara Bilge Pump is a durable, compact, and easy to install automatic bilge pump. The Sahara has everything contained in one compact yet durable package, making this pump a great option for tight spaces. This series of bilge pump features a 316 stainless steel motor shaft for corrosion resistance and a durable high-impact, glass-filled polyester impeller. The base of the pump has quick, one-handed removal for easy disassembly for cleaning..
  • Pumps include 36" lengths of 16-gauge caulked and tinned copper wire. An automatic-switch bilge pump is a requirement for any vessels 20’ especially those that accommodate overnight passengers and crew. All Attwood bilge pumps come with a 3 year manufacturer's warranty..
  • Mercury-free switch. Test knob for easy operational check Non-restrictive float movement. Larger filter area resists clogging.
  • Free flow of water around housing keeps motor cool. 316 Stainless Steel motor shaft for saltwater corrosion resistance. Durable high-impact, glass-filled polyester impeller.
  • Sahara S500 Part #: AMRA-4505-7, GPH at Open Flow: 500, GPH at 3.3' Head: 350, Hose Size: 3/4" I.D..
Check Stock

AMRJ-32903 Mayfair Cartridge Bilge Pump - 1000 GPH

  • Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
  • Lift a tab on the top, give the cartridge a twist, and pull it out.
  • that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
  • 12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
  • Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
  • 1000 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..
Check Stock

AMRJ-32503 Mayfair Cartridge Bilge Pump - 500 GPH

  • Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
  • Lift a tab on the top, give the cartridge a twist, and pull it out.
  • that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
  • 12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
  • Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
  • 500 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..
Check Stock

Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500

  • Head: 4.0M, Wire Lead: 1M, Outlet Dia: 29mm(1-1/8"), Dimension: 5.92“*4.21"/150.5mm*107mm..
  • 【Switch】Built-in float switch: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
  • 【Long life motor】 :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • 【Durable】: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
  • 【Fast Speed】When water level rises,pump can turn on bout 1 1/2 inch when it’s sitting in the bottom of the bilge at the back of the boat. It definitely pumps the water out fast! 5 Gallons underneath motor and the pump spit it out in about 20 seconds..
Check Stock

Johnson Pumps - 22102 PROLINE Bilge Pump 1000 GPH 2.5A

  • No one wants to worry that their boat is slowly taking on water because the bilge pump has failed. Well, you can sleep soundly with the reliable 2000 bilge pump on the job.Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow..
  • It is non-automatic and must be paired with a float switch or sensor and ON/OFF/AUTO switch. Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing.
  • Used in a boat,you can also use it in solar powered waterfall for your backyard, in a battery back-up sump system,etc. It empties the bilge roughly 25% faster than 1500gph bilge pump,and will continue to pump even when it encounters some minor debris.
  • Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.Tough, efficient, long life motor.Offer high capacity output Water cooled long-life motors.
  • Ignition protection Water/moisture tight seals.
  • Snap lock strainer base for easy installation and removal.
Check Stock

Boeray Bilge Pump Switch Rocker Toggle Switch Panel and Fuse DC 12V 24V Max 15A SPST ON/Off Marine Switch Panel 1 Toggle

  • Switch Ratings:DC 12V,with 2 color LED indicator, auto is green ad manual is red.
  • Include On/Off auto or manual setting and cuircuit breaker protection, including wiring diagram further simplify installation,make your job easier.
  • Dimension:90x50x42.8mm/3"x1"x1.6"(LxWxH).
  • Include Switch Panel * 1, 5A fuse * 1, screw * 4, Identification sticker * 1.
  • Apply to use with automatic bilge systems with automatic pumps or external float switches.
Check Stock

Shoreline Marine Bilge Pump Plumbing Kit | Plastic Bilge Pump Hose | 2 Stainless Steel Hose Clamps | Easy Installation | Heavy-Duty Marine Accessory

  • DIMENSIONS: The kit consists of 3/4 inches and 5 inches of plastic bilge pump hose, along with a thru-hull fitting and 2 stainless-steel hose clamps that work efficiently to remove the excess water from the hull. It works wonders with a bilge pump float switch..
  • CALCUTTA OUTDOORS: A leading manufacturer of consumer products for the outdoor sports and recreation market providing performance-driven products, including fishing rods, tackle, coolers, drinkware, outdoor apparel, paddle sports, and marine accessories..
Check Stock

Float Switch for Sump Pump - 6-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

  • CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
  • HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
  • NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
  • ADJUSTABLE TETHER of its 6-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
  • 5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
Check Stock

Float Switch for Sump Pump - 10-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

  • CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
  • HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
  • NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
  • ADJUSTABLE TETHER of its 10-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
  • 5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
Check Stock

Sailortenx Manual Bilge Pump For Boats Kayak Bilge Pump Hand Kayak Water Pump Manual For Boats Bilge Pump Manual Portable Floating Hand Bilge Pump For Kayak Etc

  • [Sturdy Durable] Manual kayak bilge pump is made of plastic, compact and lightweight, very easy to carry. The portable bilge pump Kayak manual is used to evacuate water from inside your kayak or hatch to prevent capsizing or swamping..
  • [Emergency Tool] Just connect the manual marine bilge pump for boats hose to either end of the kayak water pump, so manual bilge pumps kayaks with one end deep in the bilge and ejecting this bilge water overboard..
  • [How To use] Insert the bottom of the boat bilge pump for kayak (or hose) into the water, and use the handle to start pumping. The kayak bilge hand pump sucks water in when you pull the handle out, and disperses the water when you push the handle in..
  • [Ergonomic Design] The ergonomically designed handle is very easy to grip, boat bilge pumps manual is gear shape desingn and features a filtered nozzle to prevent seaweed, leaves and debris from clogging the manual hand bilge pump for boat..
  • [Scene To Be Used] Manual kayaks hand bilge pumps for boating perfect for emergency water removal in small boats, kayaks, canoes or dinghies..
Check Stock