Reviews Flexographic Trademark Cutting Machine

TapeCase 0.125-5-3M 5557 White Polyester/Paper/Acrylic Adhesive Water Contact Indicator Tape, 0.01" Thickness, 5 yd Length, 0.125" Width

  • Used to indicate water contact, rapidly changes from white to red when contacted with water.
  • Does not falsely indicate water contact in high humidity environments.
  • Top film layer is printable by thermal transfer, flexographic, and screen printing methods.
  • Excellent bonding to low surface energy plastics and powder coatings.
Check Stock

21' Bamboo Sink and Stove Burner Cover & Cutting Board by Trademark Innovations

  • The bamboo cutting board measures 21″ x 11″ x 1.5″.
  • Carved groove keeps liquid away from cutting surface.
  • Covers 2 burners or a sink for space saving solutions.
  • Use as a cutting board or for extra counter space.
Check Stock

Bestjybt Womens Short Boots Socks Crochet Knitted Boot Cuffs Leg Warmers Socks (Multicolored A)

  • Material: comfortable stretching acrylic fibers, cotton blend.
  • Machine washable for easy care. Wash in cold water on gentle cycle and lay flat to dry..
  • Stylish and trendy addition to your fall and winter wardrobe. Package include: 5 x Pair Leg WarmersDescriptionAttention please:Bestjybt is a registered trademark, and is exclusively distributed by Bestjybt. Bestjybt trademark is protected by Trademark Law. All rights reserved..
Check Stock

IVY Classic 36482 7-1/4\ 6 Tooth Fiber-Cement Cutting Carbide Circular Saw Blade with 5/8\ Diamond Knockout Arbor, 1/Card

  • Designed for cutting all fiber-cement boards including Hardiplank, Hardibacker, Durock and CertainTeed..
  • Flat top ground large C3 modified tungsten carbide teeth, Ripcross (Registered Trademark).
  • Deep gullets increase material removal and provide cleaner, more precise cuts.
  • Single-plank cutting blade at a lower price for small to medium cutting jobs. Use IVY Classic 36496 7-1/4-inch Poly-Crystalline Diamond Blade for larger jobs..
  • Arbor: 5/8-inch diamond knockout, Kerf: 0.071-inch, Hook: 12-degree.
Check Stock

Spyderco Ladybug 3 Lightweight Folding Knife, 1.9' VG-10 Steel Blade PlainEdge, FRN Handle, Black - LBKP3

  • Pocket-Friendly - One of Spyderco's smallest lightweight locking knives is the Ladybug. Small enough to fit on a keychain, yet capable of tackiling serious cutting chores..
  • Choose The Best For You - Available with a choice of blade steels, handle colors, and edge configurations, all of which proudly feature our Trademark Round Hole for convenient, fingernail-free opening..
  • Light and Durable - This Ladybug 3 handle is fabricated with Fiberglass Reinforced Nylon. FRN is a polymer mixed with glass fiber that is injection molded and formed into a sleek textured handle, creating a lightweight yet high-strength knife handle..
  • Advanced Cutting Performance - This lightweight knife includes our Saber Grind blade. This grind maintains full thickness through a larger portion of the blade for increased strength and elevated cutting performance..
  • Versatile - Our SpyderEdge serrated blades are most popularly known for their powerful cutting performance on fibrous materials. The SpderEdge pattern increases the cutting edge's surface area by up to 24%..
Check Stock

Cricut Variety Pack(1 StrongGrip, 1 LightGrip, 1 StandardGrip) Adhesive Cutting Mat 12

  • Works with the Cricut explore machine, Cricut expression machine, and Cricut expression 2 machine.
  • One 12" x 12" standard grip adhesive cutting mat, one 12" x 12" light grip adhesive cutting mat, and one 12" x 12" strong grip adhesive cutting mat.
  • Recommended materials for standard grip adhesive cutting mat: cardstock, pattern paper, embossed cardstock, iron-on, and vinyl.
  • Recommended materials for light grip adhesive cutting mat: printer paper, thin cardstock, vellum, construction paper, and vinyl.
  • Works with the Cricut Explore machine, Cricut Expression machine, and Cricut Expression 2 machine.
  • One 12" x 12" StandardGrip adhesive cutting mat, one 12" x 12" LightGrip adhesive cutting mat, and one 12" x 12" StrongGrip adhesive cutting mat.
  • Recommended materials for StandardGrip adhesive cutting mat: Cardstock, Pattern paper, Embossed cardstock, Iron-on, and Vinyl.
  • Recommended materials for LightGrip adhesive cutting mat: Printer paper, Thin cardstock, Vellum, Construction paper, and Vinyl.
  • Recommended materials for StrongGrip adhesive cutting mat: Thick cardstock, Glitter cardstock, Magnet material, chipboard, Poster board, and Fabric with stiffenerDescriptionCRICUT CUTTING MAT 12X12 VARITY 3 PACK.
Check Stock

IVY Classic 10750 1 x 16-Inch Swift Bore® Wood Spade Bit, High-Carbon Steel, 1/Card

  • Drop-forged high-carbon steel for fast, smooth cutting of plywood, hard and soft woods, Swift Bore (Registered Trademark).
  • Double-fluted chip removers with sharp spurs ensure faster cutting with a smooth finish.
  • Electronically heat treated and tempered to Rockwell Hardness 47-52.
  • Diameter: 1-inch, Length: 16-inch, Shank: 1/4-inch hex.
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

Invisible Man

  • A small investment can make a huge improvement in the cutting performance of your machine.
  • Getting the best cutting performance from your Prestige Pro machine can be as simple as changing the PR standard cutting pad.
  • This PR Standard Cutting Pad measures 9 7/8" x 18"..
  • The many significant advantages of the extended length of this PVC vinyl Cutting Pad are an increased work surface, the ability to shuttle multiple dies through the machine for quicker cutting and for easy registration of ClearCrop Dies..
  • Cutting pads need replacement generally after 4-6 months.
Check Stock

Cuttlebug Cutting Plate B 6'X13'-

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting..
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock

IVY Classic 40106 Swift Cut 12-Inch x 3/32-Inch x 1-Inch Arbor, Metal Cut-Off Blade for Chop Saws, 1-Piece

  • Designed to cut steel, angle iron, sheet metal and other ferrous metal products, Do not use on High Speed Saws, Swift Cut (Registered Trademark).
  • Resin bonded Aluminum-Oxide grain for faster cutting, Type 1 blade - for cutting only.
  • Blade double reinforced with fiberglass mesh for durability and safety.
  • Arbor reinforced with metal for extra strength.
  • Diameter: 12-inch, Width: 3/32-inch, Arbor: 1-inch, Max RPM: 5,100.
Check Stock

IVY Classic 40088 Swift Cut 10-Inch x 3/32-Inch x 5/8-Inch Arbor, Metal Cut-Off Blade for Chop Saws, 1-Piece

  • Designed to cut steel, angle iron, sheet metal and other ferrous metal products, Do not use on High Speed Saws, Swift Cut (Registered Trademark).
  • Resin bonded Aluminum-Oxide grain for faster cutting, Type 1 blade - for cutting only.
  • Blade double reinforced with fiberglass mesh for durability and safety.
  • Arbor reinforced with metal for extra strength.
  • Diameter: 10-inch, Width: 3/32-inch, Arbor: 5/8-inch, Max RPM: 6, 100.
Check Stock

20 3/8' Tempered Glass Stove Burner Cover & Cutting Board by Trademark Innovations

  • 4 non-removable silicone rubber feet each 1" H.
  • Covers 2 burners of most standard sized stove tops.
  • Use as a cutting board or for extra counter space.
Check Stock