Reviews Flexible Printed Circuit Board

Physics for Computer Science Students: With Emphasis on Atomic and Semiconductor Physics

  • Electrical Engineer Keychain, Circuit Board Keychain, Electronic Engineering, Computer Engineering, Gift for PCB Printed Circuit Board Design Engineer, Electrical Engineer, Engineer Teacher, Engineer Graduation Gift.
  • Engineer Charm, Circuit Board Charm, Computer Charm, Electric Plug Vector Charm.
  • Diameter of Key Ring : 1.38 Inches (3.5 cm).
  • Length of Keychain : 2.95 Inches (7.5 cm).
  • Free velvet gift bag to pack and ship our keychain.
Check Stock

Coding, Robotics, and Engineering for Young Students: A Tech Beginnings Curriculum (Grades Pre-K-2)

  • Electrical Engineer Keychain, Circuit Board Keychain, Electronic Engineering, Computer Engineering, Gift for PCB Printed Circuit Board Design Engineer, Electrical Engineer, Engineer Teacher, Engineer Graduation Gift.
  • Engineer Charm, Circuit Board Charm, Computer Charm, Electric Plug Vector Charm.
  • Diameter of Key Ring : 1.38 Inches (3.5 cm).
  • Length of Keychain : 2.95 Inches (7.5 cm).
  • Free velvet gift bag to pack and ship our keychain.
Check Stock

Engineering Notebook: Graph Paper Notebook Quadrille 4 X 4 Quad Ruled Book: 100 Pages (.25″ Lab Grid Format), 8″ x 10″ (Notebooks for Students)

  • Electrical Engineer Keychain, Circuit Board Keychain, Electronic Engineering, Computer Engineering, Gift for PCB Printed Circuit Board Design Engineer, Electrical Engineer, Engineer Teacher, Engineer Graduation Gift.
  • Engineer Charm, Circuit Board Charm, Computer Charm, Electric Plug Vector Charm.
  • Diameter of Key Ring : 1.38 Inches (3.5 cm).
  • Length of Keychain : 2.95 Inches (7.5 cm).
  • Free velvet gift bag to pack and ship our keychain.
Check Stock

Engineer Keychain Circuit Board Keychain Electrical Engineer Gift Electronic Design Engineering Computer Engineering Computer Laptop Charms Engineer Teacher Gift Engineer Student Graduation Gift

  • Electrical Engineer Keychain, Circuit Board Keychain, Electronic Engineering, Computer Engineering, Gift for PCB Printed Circuit Board Design....
  • Engineer Charm, Circuit Board Charm, Computer Charm, Electric Plug Vector Charm.
  • Diameter of Key Ring : 1.38 Inches (3.5 cm).
  • Length of Keychain : 2.95 Inches (7.5 cm).
  • Free velvet gift bag to pack and ship our keychain.
Check Stock

Enclosure Electronic DIY Circuit Board Project Aluminum Box Cooling Case 55 x 106 x 150mm, Aluminum Alloy Box Split type

  • Protection board: Aluminum Cooling Box can quickly heat dissipation, preventing internal printed circuit board from burning out.Material: Aluminum Alloy.
  • DIY project: You can use this custom enclosures for your DIY project.Dimensions: Approx. 55 x 106 x 150mm / 2.2 x 4.2 x 5.9in. Shell / Baffle Thickness: 1.25-1.5mm.
  • Reasonable design: Surface sandblasting and brushed treatment, wear resistant and beautiful, comfortable hand feeling..
  • Good performance: Good heat dissipation and excellent electromagnetic shielding performance.Product Structure: Split type.
  • Wide range of applications: Can be used for decoders, controllers, electronic products, heat dissipation aluminum casing, printed circuit board wiring aluminum box, anti-thunder aluminum shell, DIY, etc..
Check Stock

BCQLI 100 PCB Circuit Board Thermal Transfer Paper A4 Size Transfer Paper DIY Circuit Board Special Paper

  • Size: A4 / Color: Yellow / Quantity: 100.
  • 1 with a laser printer to print circuit board wiring diagram of the heat transfer paper surface(Note: can only be printed with a laser printer can not use inkjet printer!).
  • 2 with a laminator adjusted to between 150-180 degrees Celsius, the heat transfer paper printed with a circuit diagram deposited in the copper-clad side for transfer.
  • the system can also be used in place of iron plate machine, hand transfer.
  • 3 After printing remove the transfer paper, CCL will be etched into the ferric chloride solution.
  • 4 Finally, cleaning with gasoline toner board, sanding paper or water in the water to flush out carbon(For more success stories please check customer reviews).
Check Stock

Samsung DA94-02663A Main Control Board

  • The Samsung DA94-02663A Main Control Board is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications.
  • Replacement Samsung Refrigerator Main Control Board is a PCBA (Printed Circuit Board Assembly) manages the functions of the refrigerator such as....
  • Samsung DA94-02663A Refrigerator Main Control Board is also called the Electronic Control Board or Main PCB (Power Control Board).
  • High quality Samsung OEM DA94-02663A Refrigerator Main Control Board is manufactured with premium materials for durability and exact fit, be sure to....
  • Repair your appliance with confidence when you choose Genuine Samsung Factory Parts & Accessories.
Check Stock

NINDEJIN 910pcs M3 Male Female Hex Brass Standoff Spacer with Pan Head Screw Nut and Washer Assortment Kit PCB Motherboard Standoff Screw Nut Assorted Kit

  • [Hex Brass Standoff Spacer Assorted Kit]: This kit includes male to female, female to female hex brass standoff spacer, with pan head screw, hex nut, washer, it's convenient for your electronics working, such as printed circuit board and motherboard..
  • [Quality of Standoff Screws]: Standoff spacers are made of brass, screw, nut and washers are nickel-plated, have good corrosion resistance and are passivated for enhanced protection. They may be mildly magnetic. The flat sides of the hex ensure a firm grip when tightening with a wrench..
  • [Motherboard Standoff Screw Using]: In electronics, they are frequently used to raise a printed-circuit board above a surface. Standoffs are ideal fasteners for keeping printed circuit boards both stationary and elevated away from surfaces, such as the interior of a computer chassis..
  • [Standoff Screw Nut Assorted Kit Package ]: Included Male-female, Female-female series, Hex nuts, and flat washers. These fasteners stored in a transparent plastic box, convenient for your storage and use..
  • [NINDEJIN After-sales Service]: If you have any problems with NINDEJIN screws assortment kit, please contact us by email or Q&A, we will give you a professional service and reply to you within 24 hours. We will provide Lifetime technical su....
Check Stock

Solder Sucker - No Clog Aluminum Desoldering Pump with Strong Vacuum Suction,Innovative Heat Resistant Elastic Silicone Tube(DP-SS02 +2 Pack Silicone Tubes)

  • Perfect design:desoldering tool has a unique design that prevents clogging of the nozzle tip，ideal for one-hand operation，This allows you to quickly remove solder without having to stop and clean out the nozzle tip..
  • High-Quality Materials:This solder pump is built with premium 6061 aircraft-grade aluminum for maximum durability,Flexible heat resistant silicone nozzle withstands direct contact with soldering iron tip without damage..
  • Widely Used: Desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
  • Easy to operate:Aluminum solder sucker designed to be easily used with one hand,lightweight and compact,plunger is within reach of thumb, ideal for one-hand operation leaving the other free to manipulate the board or heat source..
  • Spare Tubes:Equipped with two 2-inch silicone tubes, it can last for a long time..
Check Stock

Magnetic Helping Hand, Preciva Soldering Helping Hands Electronic Repair Tool with 4 Pcs Pillars PCB Holder, 4Pcs Flexible Metal Arms, 6Pcs Alligator Clamps and Heavy Duty Stainless Steel Base.

  • What You Will Get: 4x Flexible Adjustable metal gooseneck arms, 4x Pillars circuit board holders, 1x Stainless steel base and 6x alligator clamps. One User manual, and ONE- year wanrranty..
  • Flexible Magnetic Metal Arms: It comes with four flexible metal gooseneck arms, which could be adjusted to the position you want. Andthe magnet of the end could be stable on the steel base. There are two sizes of the arms, one is 13.78” and another one is 5.91”. Makes you work easier and more convenient..
  • Stainless Steel Base: The size of the steel base is: 9”x 5.9” (230mm x 150mm). It comes with four non-slip rubber pads, which could be stable when you use it for work. Ideal for Soldering, Circuit board holder, Assembly, Repair, Modeling, Hobby, Jewelry, Crafts.
  • 6PCS Alligator Clips: The alligator clamps could be rotated 360 degrees, can also be adjusted to the exact position you want with the turn of your fingers. They are convenient for soldering, crafts work and DIY projects..
  • 4PCS Magnetic Pillar Holders: Could be Inserted to the hole of PCB board, then help fix the PCB board and assist the welding work,could suitble for different types of PCBs, also can be used with the helping arm..
Check Stock

Hakko-CHP-170 Micro Cutter - Red & NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098\ Width, 10' Length

  • Depaneling tool separates printed circuit boards (PCB) in multiple circuit board production.
  • 40kg cutting force uses shearing action to prevent delamination of the board material.
  • Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces.
Check Stock

Hakko CHP DP-24-N Depaneling Tool, Printed Circuit Board (PCB), 2.4mm Width, 2.5mm Isthmus Cut, 40kg Cutting Force

  • Depaneling tool separates printed circuit boards (PCB) in multiple circuit board production.
  • 40kg cutting force uses shearing action to prevent delamination of the board material.
  • Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces.
Check Stock

55 x 106 x 200mm Enclosure Electronic DIY Circuit Board Project Aluminum Box Cooling Case Aluminum Alloy Box, Split Type, Black/Sand SilverElectrical Boxes((sand black with bending plate))

  • Rapid cooling: Aluminum Cooling Box can quickly heat dissipation, preventing internal printed circuit board from burning out..
  • Dimensions: Approx. 55 x 106 x 200mm / 2.2 x 4.2 x 7.9in.Shell / Baffle Thickness: 1.25-1.5mm.You can use this custom enclosures for your DIY project..
  • Reasonable design: Surface sandblasting and brushed treatment, wear resistant and beautiful, comfortable hand feeling..
  • Good performance: Good heat dissipation and excellent electromagnetic shielding performance..
  • Wide range of applications: Can be used for decoders, controllers, electronic products, heat dissipation aluminum casing, printed circuit board wiring aluminum box, anti-thunder aluminum shell, DIY, etc..
Check Stock