Reviews Flexible Honing Brush

Osborn 77240SP NovoFlex Honing Tool, Silicon Carbide, 1200 Max RPM, 1.5\ Hole Diameter, 1.75\ Item Diameter, 0.25\ Shank Diameter

  • Honing Tool: NovoFlex Flexible Honing tools have round, abrasive beads fastened to the ends of flexible filaments.
  • Self-Centering Tool: This self-centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool.
  • Flexible Honing Tool: The actual NovoFlex tool will be approximately 10% larger than the hole size but will easily fit in as it is extremely flexible.
  • Cylinder Hone Brush: The hone brush is perfect for honing brake cylinders.
  • the ATB NovoFlex Flexible Honing Tool will even provide an "edge break" which is not possible with conventional honing stones.
  • Size: 1200 Max RPM, 1.5" Hole Diameter, 1.75" Item Diameter, 0.25" Shank Diameter.
Check Stock

Osborn 77378SP NovoFlex Honing Tool Silicon Carbide 1200 Max RPM 2.5 Hole Diameter 2.75 Item Diameter 0.25 Shank Diameter

  • Honing Tool: NovoFlex Flexible Honing tools have round, abrasive beads fastened to the ends of flexible filaments.
  • Self-Centering Tool: This self-centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool.
  • Flexible Honing Tool: The actual NovoFlex tool will be approximately 10% larger than the hole size but will easily fit in as it is extremely flexible.
  • Cylinder Hone Brush: The brush is perfect for honing brake cylinders.
  • the ATB NovoFlex Flexible Honing Tool will even provide an "edge break" which is....
  • Size: 1200 Max RPM, 2.5" Hole Diameter, 2.75" Item Diameter, 0.25" Shank Diameter.
Check Stock

Osborn 77314SP NovoFlex Honing Tool, Silicon Carbide, 1200 RPM, 3.75' Hole Diameter, 4.25' Item Diameter, 0.25' Shank Diameter

  • The actual NovoFlex tool will be approximately 10% larger than the hole size.
  • NovoFlex Flexible Honing tools have round, abrasive beads fastened to the ends of flexible filaments.
  • This self-centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool.
  • The ATB NovoFlex Flexible Honing Tool will even provide an "edge break" not possible with conventional honing stones.
Check Stock

Brush Research 1\ (25mm) Flex-Hone Cylinder Hone Tool 180 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock

Brush Research 2\ (51mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock

Brush Research 3 3/4\ (95mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock

Brush Research 3 1/2\ (89mm) Flex-Hone Cylinder Hone Tool 320 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock

Brush Research 1 1/8\ (29mm) Flex-Hone Cylinder Hone Tool 180 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock

Brush Research 3 3/4\ (95mm) Flex-Hone Cylinder Hone Tool 400 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock

Brush Research 1 1/4\ (31.8mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock

Victorinox Swiss Classic Fibrox 10-Inch Honing Steel

  • MAINTAINS SHARPNESS. Extend the life of your cutlery with regular use of this honing steel. Unlike a traditional knife sharpener, this steel used by....
  • INCREASES STRENGTH & STAIN RESISTANCE. Made from industrial brush chrome plated steel, each use gives your blade extra hardness and stain resistance.....
  • EASY HANDLING. Features a textured, Swiss Classic handle for a comfortable grip with a weighted honing steel that's balanced for easy handling..
  • TOOL DIMENSIONS. Made of stainless steel -- 10" in length..
  • TRUSTED SWISS QUALITY. Expertly crafted in Switzerland in 1884, Victorinox provides a lifetime guarantee against defects in material and workmanship.....
Check Stock

EWK 1-1/4 to 3-1/2 Inch 3 Stones Engine Cylinder Hone Tool Adjustable Cylinder Deglazer Piston Honer 220 Grit

  • 【Perfect Honing】 EWK cylinder honing tool is perfect to deglaze the walls of cylinders in gasoline and diesel engines. Idea for remove burrs and....
  • 【Smooth Surface Deglazing】Fits 1-1/4" to 3-1/2" (31.75mm to 88.9mm) diameter brake caliper bores, engine cylinders of automotive, motorcycle and....
  • 【Highly Flexible】 Adjustable tension screw, controls the spring pressure of stones against cylinder bore to meet different piston diameters. The....
  • 【Durable & Long Lasting & Replaceable】 Made of premium steel, maximize the cylinder honing tool with extra strength and durability. The 220 grit....
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast....
Check Stock

POWERTEC 110830 3 x 18 Inch Sanding Belts | 120 Grit Aluminum Oxide Sanding Belt | Premium Sandpaper for Portable Belt Sander – 10 Pack

  • ...nder. Turn your belt sander into a knife sharpener today. MADE IN USA!!.
  • 120 Grit & 220 Grit Ceramic Sharpening Belts | Ceramic Grain Sharpening and Sanding Belts offer superior longevity and performance. The Ceramic Grain of the 1x30 sharpening belts constantly fractures to expose a sharp cutting surface. The extra flexible backing makes this sharpener's belt kit an ideal option for sharpening and contour sanding on your 1x30 belt sander. Ceramic 1x30 Belts are known to last longer and produce less heat than other materials..
  • 600 Grit & 1000 Grit Silicon Carbide Sharpening Belts | High Grit Silicon carbide abrasive belts are an industry standard for sharpening because of the grain's consistent and fast cutting properties. The silicon carbide grain of the 600 & 1000 grit sharpening belts offers consistent sharpening results..
  • Leather belt sharpening kit includes our Super Strop White Sharpening Compound, also known as buffing compound or rouge, it is specifically designed for powered leather strops. The compound should be applied as the belt runs on your sharpener or belt sander. The buffing compound melts slightly from the friction and applies a very thin layer to the leather stropping belt. The speed of the leather honing belt and cutting power of our....
Check Stock