Reviews Flex Hone Tool

Alltrade 648439 Adj. Cylinder Hone Deglazer (2\ to 7\), Black

  • For deglazing engine cylinders 2" To 7" In diameter.
  • Knurled wheel adjusts spring pressure of stones against cylinder bore. Set screw and adjustable collar allow setting hone to 2 different maximum diameters for easier handling.
  • For deglazing engine cylinders 2-Inch to 7-Inch in diameter.
  • Knurled wheel adjusts spring pressure of stones against cylinder bore.
  • Set screw and adjustable collar allow setting hone to 2 different maximum diameters for easier handling.
  • Hone features 3 replaceable 4-Inch long 220 grit stones.
Check Stock

ABN Brake Cylinder Hone – 1-1/8in 3 Stone Piston Honing Tool Cylinder Bore Hone with 3/4in to 2-1/2in Honing Range

  • MAKE BREAK REPAIR JOBS EASIER: Remove carbon, rust, and heat glaze deposits from your caliper and piston cylinder walls with the ABN | 1-1/8 Inch Cylinder Bore Honing Tool Small Engine Cylinder Hone Kit.
  • Compatible with your electric drills, simply lubricate with brake fluid and run at low speeds moving up and down the sides of your engine cylinders.
  • BUILT TO LAST: Constructed of premium metal materials provide this brake caliper hone tool with maximum strength, durability, and longevity.
  • The flexible shaft and spread-control tension nut allow faster cutting and maneuverability.
  • 3 stone design makes insertion easy by self-centering.
  • Stone sleeves add strength and protect your abrasive stones when not in use.
  • PERFECT SIZE FOR YOUR NEEDS: Rigid honing tools for a drill features 3 carbide stones that help you remove glaze build up on your brake cylinders.
  • 220 medium grit stones measure at 1-1/8 by 3/16 by 1/8 inches (2.8 by .5 by .3cm).
  • Square ends of stones make this small brake hone tool ideal for step-cut and blind-end cylinders.
  • ADJUSTABLE RANGE: Easily adjust the range and pressure placed against your cylinders for well-controlled tension and maximum effectiveness in creating a smoother, cleaner surface.
  • Spring and knurled adjusting nut increase tensi....
Check Stock

YOTOO 3-Piece Engine Cylinder Hone Adjustable Deglazer Set for Grinding Holes from Minium 3/4\ to Maximum 7\ in Diameter with 220 Grit Stones

  • This YOTOO engine cylinder hone set has 3-Piece different sizes are packed for widely use. It can deglaze engine cylinder holes from minumium 3/4" to maximum 7" in diameter.
  • Durable flexible shaft for easy use and self centering.
  • Knurled wheel adjusts spring pressure of stones against cylinder bore.
  • Includes: 1pc 2"-7" Diameter cylinder hone tool with 3-Piece 4" Long Stones 220 grit.
  • 1pc 1-1/4" to 3-1/2" Diameter cylinder hone tool with 3-Piece 2" Long Stones 220 Grit.
  • 1pc 3/4" to 2-1/2" Diameter cylinder hone tool with 3-Piece 1-1/8" Long Stones 220 Grit.
  • WARRANTY&SUPPORT: One year warranty. Any problem, please feel free to contact us..
Check Stock

Brush Research 14353 Automotive Flex-Hone Kit, Silicon Carbide Abrasive, 180 Grit (Pack of 10 Different Sizes)

  • [QUALITY]- Proudly made in the USA. The FLEX-HONE is long lasting, lowering total cost of use compared to other brush options..
  • [INCLUDES]- 10 Piece kit features Flex-Hone sizes: 10mm, ½, 5/8”, ¾”, 7/8”, 1”, 1-1/4”, 1-1/2” 1-3/4” and 2”.
  • [IDEAL FOR]- Silicon carbide abrasive globules in 180 grit are self-aligning and self-centering-- ideal for mild steel, stainless steel and cast iron.
  • [DESIGN]- 8” overall length with a durable stainless steel stem that can be used in any collet, chuck or similar holding device.
  • [APPLICATIONS]- refinishing brake calipers, brake cylinders, lifter bores, and u-joint yokes, bearings, bushings or any cylinder needing deburring or finishing..
Check Stock

Brush Research GB Standard Duty Flex Hone for Block Cylinders, Aluminum Oxide, 3-1/2\ Diameter, 240 Grit (Pack of 1)

  • [QUALITY]- Proudly made in the USA. The FLEX-HONE is long lasting, lowering total cost of use compared to other brush options..
  • [DESIGN]- The FLEX-HONE is manufactured to be self-centering, self-aligning and self-compensating for wear for easy use..
  • [FINISHING BENEFITS]- Offered in a wide variety of grits and abrasives to allow machinists to achieve specific finishing tolerances as well as a beautiful crosshatch finish..
  • [CROSSHOLE DEBURRING]- Ideal for finishing and deburring simultaneously in a single setup. Can be used in virtually any rotating spindle..
  • [ALUMINUM OXIDE ABRASIVE]- Excellent on aluminum, brass, bronze, and softer non-ferrous materials. 240 AO is commonly used for deglazing Nikasil cylinders..
Check Stock

Flex-Hone 4\ (101MM) 320 Grit Silicon Carbide Commercial Grade

  • This brand new sealed in package Commercial Version engine cylinder hone is for 3.825" to 4.055" BORES..
  • 320 grit, Excellent for re-ringing jobs or final bore utilizing performance or Moly rings..
  • Tool is labeled as 4.000" diameter but is actually slightly larger to apply the required wall for force honing a 4.000" bore.
  • Tool is self centering and easy to use, Hone can be used with a 3/8" or 1/2" chuck portable drill or drill press or other.
  • Made in USA by the one of the best cylinder hone manufacturers..
Check Stock

Brush Research - BC234320AO BC Standard Flex Hone for Brake Cylinders, Hydraulics and Valve Guides, Aluminum Oxide, 2-3/4\ Diameter, 320 Grit (Pack of 1)

  • [QUALITY]- Proudly made in the USA. The FLEX-HONE is long lasting, lowering total cost of use compared to other brush options..
  • [DESIGN]- The FLEX-HONE is manufactured to be self-centering, self-aligning and self-compensating for wear for easy use..
  • [FINISHING BENEFITS]- Offered in a wide variety of grits and abrasives to allow machinists to achieve specific finishing tolerances as well as a beautiful crosshatch finish..
  • [CROSSHOLE DEBURRING]- Ideal for finishing and deburring simultaneously in a single setup. Can be used in virtually any rotating spindle..
Check Stock

Brush Research BC Standard Flex Hone for Brake Cylinders, Hydraulics and Valve Guides, Aluminum Oxide, 3/4\ Diameter, 240 Grit (Pack of 1)

  • [QUALITY]- Proudly made in the USA. The FLEX-HONE is long lasting, lowering total cost of use compared to other brush options..
  • [DESIGN]- The FLEX-HONE is manufactured to be self-centering, self-aligning and self-compensating for wear for easy use..
  • [FINISHING BENEFITS]- Offered in a wide variety of grits and abrasives to allow machinists to achieve specific finishing tolerances as well as a beautiful crosshatch finish..
  • [CROSSHOLE DEBURRING]- Ideal for finishing and deburring simultaneously in a single setup. Can be used in virtually any rotating spindle..
  • [ALUMINUM OXIDE ABRASIVE]- Excellent on aluminum, brass, bronze, and softer non-ferrous materials. 240 AO is commonly used for deglazing Nikasil cylinders..
Check Stock

Brush Research - GB418180AO GB Standard Duty Flex Hone for Block Cylinders, Aluminum Oxide, 4-1/8\ Diameter, 180 Grit (Pack of 1)

  • [QUALITY]- Proudly made in the USA. The FLEX-HONE is long lasting, lowering total cost of use compared to other brush options..
  • [DESIGN]- The FLEX-HONE is manufactured to be self-centering, self-aligning and self-compensating for wear for easy use..
  • [FINISHING BENEFITS]- Offered in a wide variety of grits and abrasives to allow machinists to achieve specific finishing tolerances as well as a beautiful crosshatch finish..
  • [CROSSHOLE DEBURRING]- Ideal for finishing and deburring simultaneously in a single setup. Can be used in virtually any rotating spindle..
  • [ALUMINUM OXIDE ABRASIVE]- Excellent on aluminum, brass, bronze, and softer non-ferrous materials. 240 AO is commonly used for deglazing Nikasil cylinders..
Check Stock

Osborn 77283SP NovoFlex Honing Tool, Silicon Carbide, 1200 Max RPM, 3.5\ Hole Diameter, 3.75\ Item Diameter, 0.25\ Shank Diameter

  • Honing Tool: NovoFlex Flexible Honing tools have round, abrasive beads fastened to the ends of flexible filaments.
  • Self-Centering Tool: This self-centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool.
  • Flexible Honing Tool: The actual NovoFlex tool will be approximately 10% larger than the hole size but will easily fit in as it is extremely flexible.
  • Cylinder Hone Brush: The hone brush is perfect for honing brake cylinders.
  • the ATB NovoFlex Flexible Honing Tool will even provide an "edge break" which is not possible with conventional honing stones.
  • Size: 1200 Max RPM, 3.5" Hole Diameter, 3.75" Item Diameter, 0.25" Shank Diameter.
Check Stock

Osborn 77240SP NovoFlex Honing Tool, Silicon Carbide, 1200 Max RPM, 1.5\ Hole Diameter, 1.75\ Item Diameter, 0.25\ Shank Diameter

  • Honing Tool: NovoFlex Flexible Honing tools have round, abrasive beads fastened to the ends of flexible filaments.
  • Self-Centering Tool: This self-centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool.
  • Flexible Honing Tool: The actual NovoFlex tool will be approximately 10% larger than the hole size but will easily fit in as it is extremely flexible.
  • Cylinder Hone Brush: The hone brush is perfect for honing brake cylinders.
  • the ATB NovoFlex Flexible Honing Tool will even provide an "edge break" which is not possible with conventional honing stones.
  • Size: 1200 Max RPM, 1.5" Hole Diameter, 1.75" Item Diameter, 0.25" Shank Diameter.
Check Stock

4 1/8\ (105mm) Flex-Hone Cylinder Hone 180 grit silicon carbide

  • 4-1/8" (105mm) 180 Grit Flex hone made of silicon carbide.
  • tools required Use with any Cordless or Shop Air Drill.
Check Stock

4 1/8' (105mm) Flex-Hone Cylinder Hone 120 grit silicon carbide

  • 4-1/8" (105mm) 120 Grit Flex hone made of silicon carbide.
  • No special tools required Use with any Cordless or Shop Air Drill.
Check Stock