Reviews Flat Speaker

SONY Home Cinema SPEAKER SYSTEM SAFT7

  • 5.1-channel surround sound speaker system with 4 satellite speakers, center speaker, and active subwoofer.
  • 4-inch mica-reinforced cone woofer and 0.75-inch tweeter per satellite.
  • center speaker includes pair of 3.25-inch woofers.
  • 250-watt active subwoofer offers pair of 6-inch woofers.
  • overall system frequency response of 26 Hz to 70 kHz.
  • Specially developed flat drivers with extra-thin profiles nicely complement most flat-panel TVs and monitors.
  • Satellites measure 4.73 x 14.64 x 1.26 inches (W x H x D).
Check Stock

Monoprice Speaker Wire/Cable - 50 Feet | 16 Gauge AWG Pure Copper Flat CL2 in Wall Rated, Jacketed in PVC Material for Home Theater, Car Audio and More

  • Features cable markings on one of the two conductors.
  • 16AWG Pure Copper Flat Speaker Wire | from Monoprice.
  • Pure Bare Copper is a superior conductor to the copper clad aluminum (CCA) conductors used in most other inexpensive speaker wire..
Check Stock

Bose Acoustimass 10 Series IV Home Entertainment Speaker System (Black)

  • 5.1-channel home theater speaker system for large rooms.
  • Includes Acoustimass bass module, four Direct/Reflecting Cube speakers, and a center channel speaker.
  • Powered Acoustimass module adds drama to music and movies.
  • Direct/Reflecting cube speaker arrays blend reflected and direct sound to produce stereo sound almost anywhere.
  • Horizontal center-channel speaker array visually complements flat-panel TV screens.
Check Stock

Monoprice Flat Adhesive Super Slim Micro Speaker Wire - 2 18AWG Conductors - 50 Feet | Easy to Install, Paintable, Ideal for Professional Wiring Installations

  • Easy To Install: The ultra-flat design allows for installation over flat surfaces, across rooms, under floors, around corners, and in vehicles. Use it with our Super Slim Speaker Wire Connectors to easily connect your speakers..
  • Adhesive Backing: The adhesive backing allows you to run the wire on a wall, ceiling, baseboard, or any other flat surface, without the need for a cable raceway or cable retaining clips..
  • Paintable: The textured surface is similar to that of white masking tape, which allows it to be painted or spackled to hide the wire from casual view..
  • Super Slim and Flat: Measuring less than 0.02" (0.4mm) thick, this speaker wire lays flat against the surface it is attached to. This allows it to be easily routed around corners, while remaining flat and easy to hide from view..
  • Two 18 AWG Pure Copper Conductors: Although the conductors are flat, they have the same surface area as traditional round 18 AWG conductors, ensuring that your speakers get the same voltage levels and frequencies, without any signal loss..
Check Stock

Monoprice Planate Series 16 Gauge AWG Pure Copper Flat Speaker Wire/Cable – 100Ft CL2 in Wall Rated, Jacketed in PVC Material for Home Theater, Car Audio and More

  • Features cable markings on one of the two conductors.
  • 16Awg pure copper flat speaker wire | from Monoprice.
  • Pure bare copper is a superior conductor to the copper clad aluminum (CCA) conductors used in most other inexpensive speaker wire..
Check Stock

Pyle 90°-30° Angle, Tilt, Rotation Adjustment & Solid-Steel Pin Serves as Safety-Stop Mount Speaker Bracket Stands-Dual Universal Adjustable w/ 12.5'' Distance from Wall (PSTNDW15)

  • 90°-30° TILT ANGLE ADJUSTMENT: Pyle dual adjustable wall mount speakers are 90°-30° angle adjustable. It is secured with a solid-steel pin that serves as safety-stop and effectively elevates speakers for optimum sound performance.
  • DURABLE, RUGGED AND RELIABLE: An ideal heavy-duty audio holder for loud music, PA speakers, studio monitor with rugged, durable and reliable metal for long-term use..
  • 12.5'' ARM DISTANCE: It features 12.5'' inches long arm distance from the wall with 5.25"W X 9.9"H base measurement. It safely hangs speakers on flat wall surfaces without having them touch or vibrate from the wall. Mounts up to a 30'' Speaker Cabinet Depth.
  • SOLID STEEL PIN: The product features a solid-steel pin for secure placement of a speaker attached to the bracket stand holder. It supports the weight of the speaker up to 80 lbs. and prevents it from collapsing.
  • BRACKET STAND HOLDERS: Pyle universal speaker holder is a heavy-duty reinforced solid formed steel construction. It mounts permanently and securely in most environments.
  • Durable, Rugged & Reliable - Safely Hangs Speakers on Flat Wall Surfaces - Sold as Pair.
  • Includes (2) Universal Speaker Bracket Wall Mounts - Heavy Duty Reinforced Solid Formed Steel.
  • Universal Standard 1-3/8'' Insert Fits Most ....
Check Stock

Auray TMS-135 - Studio Monitor Stands (Pair)

  • Wide Compatibility-This bookshelf speaker stand will work with whatever you got. It features a 7.79*7.79inch flat top plate with 22lbs/10kg weight capacity which is able to accommodate most speakers on the market regardless its shape or brand. Plus, the height of this speaker stand is 27.5 inches, which is a comfortable height when you are sitting on the sofa.
  • Versatile-Perlegear bookshelf speaker stand is a good fit for most speakers. Above all, it can function as a multi-media speaker stand to work with your TV, gaming system, computer and more. Besides, this speaker stand is perfect as a musical instruments speaker stand in music studio. Just beyond expectation.
  • Maximum Stability-11.8inch square wide base itself offers this bookshelf speaker stand a stable and steady support to the speaker. Four rubber pads are included and can be placed on the top plate, not only for anti-skid use, but also to absorb the shock of speaker and abate vibration so as to acquire good quality sound and achieve stability of the bookshelf speaker stand.
  • Delicate Design-The speaker stands came with two types of base feet. The protective rubber feet are made for marble or wooden floor while the metal feet will keep the speaker stands stay still on carpet. This speaker stand p....
Check Stock

KEMIMOTO Pairs of 6.5 Inch Speaker Pods Universal Angled Boxes Enclosures for 6.5 Speakers Compatible with UTVs RVs Cars Boats Trunks Trailers - 9.56 Inch Surface Mount

  • 【Speakers Retrofitting or Moving】KEMIMOTO utv speaker pods are for speakers retrofitting or moving, you can add new speakers or move existed stereo system to any 243mm (9.56inch) diameter circular flat surface you want, such as utv roof, dash, door, etc..
  • 【Pre-drilled Design】The 6.5 inch speaker boxes enclosures are pre-drilled with 145mm (5.7inch) diameter hole and 12.2mm (0.48inch) width flange edge, which helps you save a lot of time on drilling and installing. There are four 6mm holes for speaker installing and six 7mm holes for pods installing, six 16mm self-tapping screws are contained additionally, you can decide if the holes and screws will be used..
  • 【Sealed Pad】Different from other products on the market, KEMIMOTO 6.5 speaker box pods are designed with sealed pad, it can help speakers to be mounted tightly and prevent sound leakage, which will give you better user experience and sound enjoyment..
  • 【Fitment】KEMIMOTO speaker box enclosure fits 6.5 inch speakers perfectly, and it can be mounted on 243mm (9.56inch) diameter circular flat surface, such as UTVs, ATVs, Cars, Boats, Trunks, Trailers, etc. Besides, it is compatible with can am maverick x3/ sport/ trail, compatible with polaris ranger, rzr, compatible with pioneer, talon, ....
Check Stock

Yamaha NS-F210BL 2-Way Bass-Reflex Floorstanding Speaker - Each (Black)

  • Designed to reproduce the full, dynamic sound of HD sources.
  • Woofers use light aluminum cones for extra fast response.
  • Heavy duty, round, steel bass anchor speaker stand.
  • Only 1 speaker is contained in this package.
Check Stock

Perlegear Universal Speaker Stand- Bookshelf Speaker Stands Holds 22lbs Speaker Stand Pair with Cable Management Surround Sound Speaker Stand- PGSS6

  • Wide Compatibility-This bookshelf speaker stand will work with whatever you got. It features a 7.79*7.79inch flat top plate with 22lbs/10kg weight capacity which is able to accommodate most speakers on the market regardless its shape or brand. Plus, the height of this speaker stand is 27.5 inches, which is a comfortable height when you are sitting on the sofa.
  • Versatile-Perlegear bookshelf speaker stand is a good fit for most speakers. Above all, it can function as a multi-media speaker stand to work with your TV, gaming system, computer and more. Besides, this speaker stand is perfect as a musical instruments speaker stand in music studio. Just beyond expectation.
  • Maximum Stability-11.8inch square wide base itself offers this bookshelf speaker stand a stable and steady support to the speaker. Four rubber pads are included and can be placed on the top plate, not only for anti-skid use, but also to absorb the shock of speaker and abate vibration so as to acquire good quality sound and achieve stability of the bookshelf speaker stand.
  • Delicate Design-The speaker stands came with two types of base feet. The protective rubber feet are made for marble or wooden floor while the metal feet will keep the speaker stands stay still on carpet. This speaker stand p....
Check Stock

Pioneer SP-T22A-LR Add-on Speaker designed by Andrew Jones for Dolby Atmos,Black

  • Highly Acclaimed and Award Winning Speaker Series.
  • Add-On top firing speakers to make any flat top speaker Dolby Atmos and DTS:X compatible.
  • Concentric Driver including a 4” woofer and 1/2” tweeter for improved frequency response and sound placement in enabled Atmos and dts:x speaker....
  • Gold 5-way binding posts for more secure speaker wire connection.
  • RF Molded Curved Cabinets to reduce internal standing waves.
Check Stock

Kenwood Excelon KFC-XW1000F 10-Inch 1000 Watt Shallow Mount Car Subwoofer

  • The Kenwood eXcelon flat subwoofer design is approximately 40% slimmer in height than a standard subwoofer. This makes them ideal for installation in the tightest of spaces such as behind or under the seat of a pickup truck..
  • The eXcelon flat woofer uses a carbon-glass fiber honeycomb cone which allows the woofer to be efficient and durable at the same time..
  • The Kenwood woofer features a smooth linear rubber surround for added durability and increased excursion resulting in exceptional deep bass response..
  • The Kenwood woofer features an advanced Heat Transfer System designed specifically for its slim-design to provide proper ventilation to keep the woofer cool..
  • The flat woofer utilizes a pair of silver-plated spring terminals on one side of the woofer for connection to your amplifier’s speaker wiring. The spring terminals will accept up to 10 AWG speaker wire..
Check Stock

Pair of Kenwood Excelon KFC-XW1000F 10" 2000W Shallow Car Audio Subwoofers Subs

  • The Kenwood eXcelon flat subwoofer design is approximately 40% slimmer in height than a standard subwoofer. This makes them ideal for installation in the tightest of spaces such as behind or under the seat of a pickup truck..
  • The eXcelon flat woofer uses a carbon-glass fiber honeycomb cone which allows the woofer to be efficient and durable at the same time..
  • The Kenwood woofer features a smooth linear rubber surround for added durability and increased excursion resulting in exceptional deep bass response..
  • The Kenwood woofer features an advanced Heat Transfer System designed specifically for its slim-design to provide proper ventilation to keep the woofer cool..
  • The flat woofer utilizes a pair of silver-plated spring terminals on one side of the woofer for connection to your amplifier's speaker wiring. The spring terminals will accept up to 10 AWG speaker wire..
Check Stock