Reviews Flat Cut Off Wheels

Makita 5 Pack - 4.5\ Cut Off Wheels For 4.5\ Grinders - Aggressive Cutting For Metal & Stainless Steel/INOX - 4-1/2\ x .045\ x 7/8-Inch

  • ✅ 5 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders.
  • ✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix.
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION....
Check Stock

Shark Industries PN-19 Die Grinder Cut-Off Wheels 2-Inch x 1/32” x 3/8” Shark Type-1 Double-Reinforced Thin Wheels 54 Grit Maximum RPM 30,000 10 Cutting Discs

  • Double Fiberglass Reinforced Cut-Off Wheel – Our cutting wheels have double the reinforcement of less expensive wheels that are made overseas, which....
  • 10-Pack of Wheels – When you purchase our 2-inch cutting wheels 10-pack, you’ll always have plenty of cut-off wheels to finish the job and start....
  • High-Speed Steel Cutter – With a maximum spin speed of 30,000 revolutions per minute, our wheel is made to precisely cut high-tensile materials like....
  • Made in USA Cut-off Wheels – Count on the materials and quality we use in the manufacturing of these USA-made cut-off wheels.
  • Carbon Arrows – Great for cutting custom carbon arrows, for a smooth finish.
Check Stock

OEMTOOLS 26528 10 Piece Cut Off Wheel Set with Mandrel, Cutoff Wheel Mandrel Set, Premium Metal Cutting Wheels w/ 3/8" Arbors, Die Grinder Cut Off Wheel

  • Superior Cutting: Get the best means for cutting fiberglass, plastic, steel, and other ferrous metals with our angle grinder cut off tool.
  • The flathead notch on the mandrel adaptor makes fitting the air tool arbor cutting wheels into tight spaces easy.
  • Compatible Discs: Our cutting discs are great for use on die grinders, air cut off tools, and angle grinders.
  • Get clean burr-free cuts every time with our 3 inch cut off wheel.
  • Excellent Maintenance Tools: Cut through the metallic fluid or oil lines of your vehicles with ease using our air cutting wheel.
  • Stuck bearings, bolts, screws, and more are removable with the premium metal of our 1/32” thick cut off wheels.
  • Durable Materials: Get strength from our cutting wheels for metal.
  • These cutting discs are 1/32” thick for long term use and made of premium metals that work at a max RPM of 20,400.
  • Product Specifications: 10 piece 46 Grit 3” x 1/32” cut off wheels.
  • Cutting discs feature 3/8” arbor holes.
  • Mandrel designed to fit 0.625 to 1/32” thick cut off wheels.
  • Cuts fiberglass, plastic, iron, steel, and other ferrous metals.
Check Stock

Cut Off Wheels 4-1/2 ,PRETEC 50+5 Pack Metal Cutting Wheel,Thin 4.5” Metal & Stainless Steel Fast Cutting Discs for Angle Grinder - 7/8 Arbor Hole

  • ...ll 4-1/2 inch (115mm) angle grinders with 7/8 inch (22.2mm) arbor.such as dewalt, makita, milwaukee, metab, bosch or any other 4.5 inch angle grinder.Cutting wheel thickness:1/25 inch(1.2mm).Up to 13,300 RPM (>common 13,000 RPM) rotating speed for maximum productivity..
  • 【Safety & Durable】Metal 4.5 cut off wheels are specifically manufactured from corundum and white alundum grain that provides high hardness, durability and abrasion resistance,extend die grinder cut off wheel the service life..
  • 【Sharp & Clean Cutting】Cutting discs 0.04 inch ultra thin design for fast burr free and stable cutting. Make fast, clean cuts in steel, stainless and other ferrous metals with these abrasive cut-off wheels. Promot the heat dissipation of the cutting blade during work, avoid metal thermal burns. Performance with minimal material loss, make the cutting project more precise and efficient..
  • 【Professional Cutting Wheel】PRETEC Cutting wheels obtained CE,ISO certification.Help you better cut stainless steel, aluminum alloy, cast iron, carbon steel and general-purpose metal..
  • 【 Multiple Ueses】Cut off wheels 4 1/2 inch are designed for cutting steel, iron, plastic,fiberglass,stainless steel including rebar, steel pipe, sheet metal, structural tubin....
Check Stock

Upgrade Your Auto Set of Four 16' Polished Stainless Steel 1 1/2' Deep Wheel Trim Rings

  • [MATERIAL] Double deck protective wheel hub, anti-collision and scratch proof, the outer layer is scraped. also helps to reduce future expenses for your four wheelers for restoration of your metal rim surface..
  • [High quality] Choice Silica gel material with high scalability, durable, not easy to fall off, can resist high temperature of more than 200?, more suitable for wheels than other products on the general market. Fits most wheels with a flat or round lip up to 24 inch ..
  • [UNIQUE DESIGN] Super Cool Looking Wheel Rim Protector Strips designed to protect your car rim edge and to cover existing damage. It also enhance the look of your wheel with bright colored inner strip..
  • [EASY TO INSTALL] Unique cut to radian fit mounting track and snap-in color insert fit all wheels from 13 inch to 22 inch that have 1/4 inch (6 mm) wide flat outer edge on the face of the wheel. Drive away at highway speeds immediately after installation..
  • [COOL AND MYSTERIOUS] Available in a variety of colors to custom personalize your vehicle. Match or complement your car body paint, vehicle graphics or caliper color. Color inserts can be swapped out in seconds to modify styling of your wheels..
Check Stock

Norton Blue Fire Small Diameter Reinforced Abrasive Flat Cut-Off Wheel Type 01 Zirconia Alumina and Aluminum Oxide 3/8 Arbor 3 Diameter x 1/16 Thickness Pack of 25

  • Zirconia alumina and aluminum oxide for up to twice the life of aluminum oxide wheels.
  • Type 01 wheels are straight (also called flat) cut-off wheels, and are used for peripheral grinding.
  • Small diameter wheels for use with horizontal and straight shaft grinders.
  • Reinforced design helps provide safety, strength, and straight cuts.
  • Resin bonds soften under the heat of grinding, releasing dulled abrasive grains.
Check Stock

S SATC 4 1/2 Cut Off Wheel 50 PCS Cutting Wheels 4.5 x.040 x7/8 Angle Grinder Cutting Disc Ultra Thin Metal & Stainless Steel

  • ☞LONGEST LASTING: Cut off wheels feature metal center and ultra-thin 0.040" thickness. 50 pieces cutting disc for metal & stainless steel meet ANSI safety requirements. Grinder Wheel Dimensions: 4 1/2"x0.040"x7/8".
  • ☞PERFECT ALUMINUM: 4 1/2 cut off wheel is made with a proprietary combination of alumina particles for aggressive cutting action, providing the industry's best balance of cut life, cut rate, cut accuracy, power requirements and heat build-up, to give you unmatched cut time, consistent precise integrity, moderate power requirements and relatively low heat build-up.
  • ☞FITS ANY ANGLE GRINDER: 50 PCS cut-off wheels for metal & stainless steel fast burr-free cutting feature 4 1/2"x0.040"x7/8" , compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool..
  • ☞MULTIPLE UESES: Cut off wheels 4 1/2 inch are designed for cutting fiberglass, steel, iron, plastic, stainless steel including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel , and other ferrous metals..
  • ☞Attention Please: Cutting disc is made in accordance. Before using these, please wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
Check Stock

Norton Blue Fire Small Diameter Reinforced Abrasive Flat Cut-Off Wheel Type 01 Zirconia Alumina and Aluminum Oxide 3/8 Arbor 3 Diameter x 0.35 Thickness Pack of 25

  • Zirconia alumina and aluminum oxide for up to twice the life of aluminum oxide wheels.
  • Type 01 wheels are straight (also called flat) cut-off wheels, and are used for peripheral grinding.
  • Small diameter wheels for use with horizontal and straight shaft grinders.
  • Reinforced design helps provide safety, strength, and straight cuts.
  • Resin bonds soften under the heat of grinding, releasing dulled abrasive grains.
Check Stock

Dynabrade 52420 3-Inch 7-Degree Offset Cut-Off Wheel Tool

  • Cut-Off Wheel Tool, for efficient cutting of sheet metal, frame rails, clamps, bolts, etc.
  • 3-Inch Diameter, 7 Degrees Offset, 5 hp, 20,000 RPM, Front Exhaust.
  • Accepts optional 3-Inch diameter Type 1 Cut-Off Wheels.
  • Cut-off Wheel Tool, For Efficient Cutting Of Sheet Metal.
  • 3-inch Diameter, 7 Degrees Offset, 5 Hip.
  • Accepts Optional 3-inch Diameter Type 1 Cut-off Wheels.
Check Stock

Rotary Thread RTM7 Mandrel - Essential for Die Grinder Accessories & Cut-Off Wheels, 3/8" Arbor Hole & 1/4" Stem, Ideal for Holding Die Grinder Bits - Durable Metalworking Tool (2 Pack)

  • ESSENTIAL TOOL: A high-quality and effective tool is a must-have for anyone who wants to work with metal efficiently and safely.
  • PRECISION CUTTING: Holds cut-off wheels securely in place, allowing for precise and with greater efficiency, reducing time and effort for cutting, grinding, sanding, cleaning, or polishing.
  • UNIVERSAL COMPATIBILITY: The die grinder cut off wheel mandrel fits most Type 1 cut-off wheels with a 1/4" arbor hole, making it versatile accessory for use with a wide range of cut-off wheels.
  • IMPROVED SAFETY: The shank and screw are made of A3 carbon steel. It ensures secure attachment of cut-off wheels and reduces the risk of accidents or injuries due to wheel slippage.
  • HIGH-QUALITY, DURABLE and LONG-LASTING: The cutting wheel mandrel is made of A3 carbon steel with black plating, which is corrosion resistant to provide long life.
Check Stock

Norton Blue Fire Chop Saw Reinforced Abrasive Cut-Off Wheel Type 01 Flat Zirconia Alumina and Aluminum Oxide 1 Arbor 12 Diameter x 7/64 Thickness Pack of 1

  • Zirconia alumina and aluminum oxide for up to twice the life of aluminum oxide wheels.
  • Type 01 wheels are straight (also called flat) cut-off wheels, and are used for peripheral grinding.
  • Reinforced design helps provide safety, strength, and straight cuts.
  • Resin bonds soften under the heat of grinding, releasing dulled abrasive grains.
Check Stock

Norton Blue Fire Plus Right Cut Right Angle Grinder Reinforced Abrasive Flat Cut-Off Wheel Type 01 Zirconia Alumina 7/8 Arbor 6 Diameter x 0.045 Thickness Pack of 25

  • Zirconia alumina and aluminum oxide for up to twice the life of aluminum oxide wheels.
  • Type 01 wheels are straight (also called flat) cut-off wheels, and are used for peripheral grinding.
  • Reinforced design helps provide safety, strength, and straight cuts.
  • Resin bonds soften under the heat of grinding, releasing dulled abrasive grains.
  • The reinforcement reduces breakage and helps provide straight cuts.
Check Stock

Shark Industries PN-26-6 Die Grinder Cut-Off Wheels - 6 Pack, 3-Inch x 1/32 x 3/8 Shark Type-1 Double-Reinforced Thin Wheels, 54 Grit, Maximum RPM 25,000 (6 Cutting Discs)

  • Double-Reinforced Cutting Wheel - Weve double-reinforced our abrasive cut-off wheels with fiberglass to provide added durability and longevity.
  • Made in USA Cut-Off Wheels - You can trust the materials and the manufacturing process used for our abrasive cutting wheels, as they are made in the United States.
  • Perfect for cutting carbon steel, cast iron and general-purpose metal.
  • Made for Aggressive, High-Speed Cutting - Our wheel can spin at a maximum speed up to 25,000 revolutions per minute. For safety, be sure to use with a guard..
  • 6-Pack of Wheels - This kit has six wheels, so youll always have plenty of cut-off wheels on hand to finish the job and to start the next one!.
Check Stock