Reviews Flash Umbrella Swivel Mount

Zeetain 8\/20cm Dual Speedlite Camera Mount Tripod Bracket Flash Extension Bar,8\ Dual Tripod Bracket for Camera,LED Video Light,DSLR Camera,Flash Light

  • Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder..
  • Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
  • A hole with locking screw in middle specially designed for holding umbrella..
  • Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle..
  • Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Package includes 2 pcs of Flash Light Stand Bracket.
Check Stock

ChromLives Dual Flash Bracket Hot Shoe Speedlight Stand Umbrella Holder Light Stand Bracket Mount 1/4'' to 3/8'' Compatible with Studio Video DSLR Camera Canon Nikon Yongnuo

  • Light Stand Bracket, Dual Cold Shoe Mount Extension Bar with Umbrella Holder..
  • Dual Flash Shoe Bracket- With double cold shoe mount on an Extension bar. Universal cold shoe mount for most DSLR Camera Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light. (Note:this adapter does not fit Sony and Minolta flash).
  • Umbrella Mount Bracket- A hole design for mounting urbrella. 180° Swivel joint allow vertical adjustment of the umbrella and flash light..
  • Light Stand Bracket- Comes with a 1/4 inch to 3/8 inch screw spigot, allow the light stand bracket to attach to a tripod or light stand..
Check Stock

Anwenk Camera Flash Speedlite Mount Swivel Light Stand Bracket with Umbrella Reflector Holder for Camera DSLR Nikon Canon Pentax Olympus and Other DSLR Flashes Studio Light LED Light, 1Pack

  • Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder..
  • Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
  • A hole with locking screw in middle specially designed for holding umbrella..
  • Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle..
  • Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Note: This flash bracket is not ideal for sony minolta godox shoe system..
Check Stock

SUPON Flash Bracket U-Shape,180° Adjustable Swivel Umbrella Softbox Holder with 1/4 to 3/8 Screw &Nut Adapter and Cold Shoe Mount for DSLR Cameras,Speedlites,Tripod,Light Stand,Studio,LED Light

  • Special Design- This flash bracket can attach on your light stand and flash light, insert your photography umbrella or Softbox and adjust your angle....
  • Umbrella/Softbox Mount Bracket- A hole with locking screw in middle specially designed for holding umbrella or softbox. Allows 180° swivel to adjust....
  • 1/4" To 3/8" Screw&Nut Adapter- The detachable 1/4" to 3/8" screw socket at the bottom, which can be converted by yourself, allow the U shape flash....
  • Cold Shoe Mount Bracket- Come with a cold shoe mount on top design fits DSLR camera flash speedlites or video LED light, studio light, monitor, ring....
  • Durable- The flash bracket is made of whole aluminum alloy,durable and solid to use..
Check Stock

2Pack Updated Flash Bracket Flash Stand Light Stand Bracket Mount with Umbrella Holder Mount Swivel for Camera DSLR Nikon Canon Pentax Olympus and Other DSLR Flashes Speedlite Studio Light LED Light

  • 2Pack of Flash Bracket for Most Flash Speedlite- This flash bracket combines a universal E Type Flash cold shoe bracket (updated), Swivel light stand....
  • Your Expensive Flash will not Fall - Updated Universal Cold Shoe Bracket on top, the cold shoe will catch the flash shoe base firmly without dropping....
  • Umbrella Holder Mount- This flash bracket is with a hole with locking screw in middle specially designed for holding umbrella..
  • Light Stand Bracket Mount- Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20....
  • Easy Adjustment- This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different....
Check Stock

SLOW DOLPHIN Camera Flash Speedlite Mount Swivel Light Stand with Umbrella Bracket Holder （2 PCS）

  • It can be applied to various flash,and many more speedlites..
  • 180 Degree Swivel Joint- lamp holder in reflective umbrella or soft light umbrella socket, and can adjust the flash back office degrees, 180 degrees....
  • Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread..
  • High Quality Aluminum Alloy- The camera umbrella holder is made of aluminum alloy,durable and solid..
  • NOTE: Flash,Tripod and soft umbrella are not included This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position....
Check Stock

Universal 3-in-1 Tri-Hot Shoe Mount Flash Bracket Holder with 2 Umbrella Hole for Light Stand Camera Tripod Reflective Umbrella Studio Flash Soft Box Speedlite Diffuser

  • 1. The flash bracket is made of metal material, surface antioxidant treatment.
  • hot shoe mount is made of aluminium alloy, stainless steel spring, very solid.
  • 2. Three hot shoes can be adjusted independently within the rang of 15.5mm to 18.5mm, compatible with standard cold foot flashes of Canon, Nikon, Pentax, Ricoh, Olympus, Panasonic and so on.
  • 3. The flash holder can be removed from the tri-hot shoe mount.
  • the top of the holder with 1/4" screw hole which can be connected with 1/4"screw and extended to other use.
  • the flash holder uses gear meshing, can tilt from left to right within 180°.
  • locked by screw, easy to use together with spanner.
  • 4. The tri-hot shoe mount has a built-in lateral umbrella hole locked by push bar and reed, suitable for umbrella shaft of diameter less than 10mm.
  • 5. The umbrella holder has a vertical umbrella hole, suitable for umbrella shaft of diameter less than 10mm.
  • with a 18mm hole in the bottom, if used with 1/4" to 3/8" adapter screw, can be used with all kinds of light stands and tripods, including light stands with 15.8mm diameter head, and tripods or monopods with 1/4" or 3/8" screw head..
Check Stock

JINTU Dual Hot Shoe Flash Speedlite Bracket Stand Umbrella Holder Adapter with 1/4' 3/8' Screw Mount for Canon Nikon Yongnuo Godox Flash Speedlite Video Camera Camcorder

  • - Dual hot shoes adapter, universal for flash with standard hot shoe mount..
  • - Standard 1/4 inch screw can connect many flash lights directly, which is convenient for photographers to use the flash to make multi-directional fill light when shooting outside..
  • - Built in umbrella socket, and the angle of the flash can be adjusted 180 degrees, perfect for holding your photo umbrella..
  • - Universal cold shoe mount compatible with Canon, Nikon etc most DSLR cameras and other flashes with standard shoe mount or video LED light, studio light..
  • - Aluminium alloy made, sturdy and durable..
Check Stock

Camera Speedlite Mount Stand Flash Stand Bracket Umbrella Mount Holder Shoe Mount Compatible with Nikon Pentax Olympus Nissin Metz and Other Speedlite Flashes E Type-2 Pack

  • 【CAMERA FLASH SPEEDLITE MOUNT】It can be applied to various flash,Compatible with Nikon, Pentax, Olympus, Yongnuo and many more speedlites.(Note:this adapter does not fit Sony and Minolta flash).
  • 【FLEXIBLE POSITIONING】These flash mounts allow 180° vertical and 360° horizontal adjustment to position the umbrella and flash light in different angle.
  • 【1/4" SOCKET AND 3/8" METAL HOTSHOE】1/4" socket and 3/8" metal hotshoe foot on the bottom can be attached on tripod or light stand or any camera accessories with 1/4"-20 or 3/8"-16 thread.
  • 【CAMERA UMBRELLA HOLDER】There is a hole in this item so that you can insert a lighting umbrella and align it with the flash.
  • 【STURDAY AND STABLE】 The camera umbrella bracket is made of aluminum alloy,durable and solid..
Check Stock

WELLMAKING U-Shape Camera Flash 180°Swivel Mount Bracket with Standard 1/4 to 3/8 inch Metal Male Screw Spigot Stud Compatible for Umbrella Softbox Reflector Holder Stand for Video Light Studio Light

  • 【CAMERA FLASH SPEEDLITE MOUNT】It can be applied to various flash,Compatible with Nikon, Pentax, Olympus, Yongnuo and many more speedlites.(Note:this adapter does not fit Sony and Minolta flash).
  • 【FLEXIBLE POSITIONING】These flash mounts allow 180° vertical and 360° horizontal adjustment to position the umbrella and flash light in different angle.
  • 【1/4" SOCKET AND 3/8" METAL HOTSHOE】1/4" socket and 3/8" metal hotshoe foot on the bottom can be attached on tripod or light stand or any camera accessories with 1/4"-20 or 3/8"-16 thread.
  • 【CAMERA UMBRELLA HOLDER】There is a hole in this item so that you can insert a lighting umbrella and align it with the flash.
  • 【STURDAY AND STABLE】 The camera umbrella bracket is made of aluminum alloy,durable and solid..
Check Stock

Neewer Professional Universal E Type Camera Flash Speedlite Mount Swivel Light Stand Bracket with Umbrella Holder for Canon Nikon Pentax Olympus and Other Flashes Studio Light LED Light 3 Pack

  • Flash cold mount shoe bracket, Light Stand Mount with Umbrella Holder.
  • Top cold shoe clip design fits most Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light(Note:this adapter does....
  • A hole specially designs for holding umbrellas,180° vertical and 360° horizontal adjustment.
  • Mount with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand.
  • Note: Light stand, speedlite flash and umbrella are not included.
Check Stock

GODOX 32\/ 80cm Umbrella Octagon Portable Softbox Reflector for Studio Photography Speedlite Flash

  • The light Umbrella Octagon diffusion surface is 32"/ 80cm, with wide range of applications, suitable for portrait or product photography..
  • Can be used with flashes and some studio flash lights with umbrella hole.Note:the softbox no bowens mount..
  • High quality flash diffuser, minimize light loss and maximize light spread..
  • With zipper opening, easy to install the soft box with the stand..
  • It is a soft box when being spread and like an umbrella when being folded, easy to use..
Check Stock

Neewer 35.4''/90cm Octagonal Softbox with S-Type Bracket Mount, Carrying Case Compatible with Neewer TT560 NW561 NW625 NW635 NW645 NW655 NW-670 750II Speedlites and Q3 AD200Pro Flash Strobe, etc

  • Great compatibility with NEEWER TT560 750II NW670 Series Speedlite Flash.
  • Unique speedlite mounting method: the speedlite can be clamped firmly into the mount both horizontally and vertically.
  • No Pre-assembly or Post Disassembly, Mounts with Light Pressure - No Touch-Fasteners.
  • Made of Impact Resistant ABS Plastic, Precise Stepless Tilt Control, Large Adjustment Handle, Integrated Umbrella Mount.
  • The plastic gasket of the inner bracket can be removed, so that larger size light can be installed on the bracket.
  • Adjustable for Different Shoe Mount Flashes and Barebulb Strobes, Allowing Depth and Spread Control of the Mounted Light Head.
  • Bowens S-Type mount design facilitates most studio flash accessories, e.g. Flash Snoot, softboxes, reflectors, beauty dishes, umbrella, etc.
Check Stock