Reviews Flare Brake Line Tool

ABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube

  • [Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
  • [Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
  • [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
  • 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
  • [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
  • Each die block is 1.7 inches (4.3 cm) long.
  • Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
  • [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1....
Check Stock

Titan 51535 3/16-Inch Double Flaring Tool

  • Set Contents: (1) 3/16-Inch Double Flaring Tool with Removable Handle, (1) Positioning Bolt, (1) Double Ended OP1/OP2 Punch, (1) Container of Die Lubricant.
  • Creates a perfect inverted 45-Degree SAE double flare with 3/16-inch steel and nickel-copper tubing. Not recommended for use on stainless steel tubing..
  • Can be used on the vehicle! Compact design can be used in tight under-car spaces allowing user to repair brake lines in place on the vehicle..
  • Handle can be removed if you prefer to use in a bench vise..
  • SAE Double Flare is an inverted 45-Degree flare typically used in automotive brake line applications. 3/16-Inch brake lines are on almost all cars and trucks making this flaring tool usable with most vehicles..
Check Stock

Eastwood Professional Brake Line Flaring Tool Kit | 45° Degree Single Double & Bubble Brake Tubing Flares | Use with Hydraulic Hose | Ideal for Stainless Steel Tube or Copper Pipe | Inc 4 Split Dies

  • MULTI USE FLARING TOOL: This is an all in one brake line flaring tool kit device. Easily create precision single flare, double flare, or a bubble in your tubing. A high quality OEM style flare is essential, as nobody likes leaks especially in hydraulic, or brake lines. With the Eastwood tubing flare tool you’ll always get quality reliables results time after time!.
  • HOW TO USE: Use stainless steel, steel, or any other soft metal like copper tubing of 3/16-inch, ¼-inch, 5/16-inch, 3/8-inch and 4.75-mm diameter. Meaning this tool is multi purpose and ready to help with automotive brake lines, hydraulic lines, or even with plumbing pipes. Next simply use the rotating turret style flaring die mount to create the suitable flare for your needs..
  • EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support..
  • SAFETY INFORMATION: Always wear eye protection when operating the Flaring Tool as oils, grease and metal particles may be ejected while the tool is in operation. Make sure that th....
Check Stock

Shankly Flaring Tool Set 9 Piece - Professional Grade Heavy Duty Brake Line Flaring Tool Kit and Swage Tool Flare Tool with Tubing Straightener or Cutter Not a Double Brake Flaring Tool

  • ✅ ALL-INCLUSIVE KIT: Shankly's standard flaring tool kit includes an all-inclusive professional tubing straightener or cutter, allowing the mechanic....
  • ✅ PRECISE AND CONVERTIBLE: This brake line flaring tool swivel-type swaging adapters and flaring cones are made of the strongest steel materials and....
  • ✅ MULTIFUNCTIONAL FLARE ADAPTERS: This is the only flaring tool set a mechanic will require because it includes flaring tool adapters in the....
  • ✅ FITS YOUR APPLICATION: Shankly's flaring tool or brake line tool includes five swage fittings and several useful tube sizes: 3/16”, 1/4”,....
  • ✅ SATISFACTION GUARANTEED: We stand by the word "quality" we assure you that your purchase of this heavy-duty brake line flaring tool or brake tool....
Check Stock

Shankly Flaring Tool Set 10 Piece - Professional Grade Heavy Duty Brake Line Flaring Tool Kit and Swage Tool Flare Tool with Tubing Straightener or Cutter Not a Double Brake Flaring Tool

  • ✅ ALL-INCLUSIVE KIT: Shankly’s standard flaring tool kit is all-inclusive, complete with a professional tubing straightener or cutter, allowing....
  • ✅ MULTIFUNCTIONAL FLARE ADAPTERS: Flaring tool adapters range from the following sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", making....
  • ✅ FITS YOUR APPLICATION: Shankly's flaring tool or brake line tool includes five swage fittings and several useful tube sizes: 3/16”, 1/4”,....
  • ✅ PRECISE AND CONVERTIBLE: This brake line flaring tool swivel-type swaging adapters and flaring cones are made of the sturdiest steel materials and....
  • ✅ SATISFACTION GUARANTEED: We stand by the word "quality" we assure you that your purchase of this heavy-duty brake line flaring tool or brake tool....
Check Stock

Racewill 25 ft 3/16 Copper Coated Brake Line Kit Includes 16 Fittings and 4 Unions Brake Line Fittings + Brake Line Double & Single Flaring Tool Kit

  • MATERIAL：Racewill copper coated steel line is easy to be bent by hand and flare by simple tools.all brake line fittings are made of durable brass to prevent rust and plated for corrosion resistance.
  • UPGRADE TO 20 FITTINGS: ① 2 x 3/16” (7/16-24) Inverted Tube Nut.
  • ② 10 x 3/16" (3/8-24) Inverted Tube Nut.
  • ③ 2 x 3/16” (1/2-20) Inverted Tube Nut.
  • ④ 2 x 3/16"(9/16-18) Inverted Tube Nut.
  • RUST AND CORROSION PROOFING：Our 3/16 Copper coated steel line are the longest lasting brake line and much better than standard steel tubing. Copper coated brake line are ideal for vehicles experiencing harsh weather and environmental conditions.
  • MAKE DOUBLE & SINGLE FLARES: Designed to use when flaring single or double flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing. Flaring tool apply to 1/2", 3/8", 5/16", 1/4", 3/16" O.D. tubing..
  • WIDELY APPLICATION：Brake line and fittings Fits for Most Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..
Check Stock

25Ft 3/16 Copper-Nickel Coated Alloy Brake Line Tubing Coil Kit Tube Roll with 16 Fittings

  • 25 Ft Roll x 3/16" copper-nickel alloy COATED OD Zinc plated steel brake line tubing with 16 assort fittings..
  • It won't rust, corrosion resistance, extremely easy to bend by hand and flare by simple tools..
  • The brake line is very flexible and very easy to bend and flaring to mount - you can manually bend our brake lines without the need for a bending tool.
  • It includes SAE flare Nuts and meets relative international standards..
  • With superior durable material and great performance for longer use..
Check Stock

Shankly Double Flaring Tool Set Professional Grade Double Brake Flaring Tool Heavy Duty Brake Line Flaring Tool Kit and Swage Tool Flare Tool with Tubing Straightener or Cutter

  • ✅ ALL-INCLUSIVE KIT: Shankly’s standard flaring tool kit is all-inclusive, complete with double flaring capability with a professional tubing....
  • ✅ MULTIFUNCTIONAL FLARE ADAPTERS: This double flaring tool feature 7 adapter sizes 3/16",1/4",5/16",3/8",7/16",1/2" & 5/8, making this the only....
  • ✅ FITS YOUR APPLICATION: Shankly's flaring tool or brake line tool includes five swage fittings and several useful tube sizes: 3/16”, 1/4”,....
  • ✅ PRECISE AND DURABLE: This brake line flaring tool swivel-type swaging adapters and flaring cones are made of the sturdiest steel materials and....
  • ✅ SATISFACTION GUARANTEED: We stand by the word "quality" we assure you that your purchase of this heavy-duty double brake line flaring tool or....
Check Stock

TEMCo Industrial Universal Automotive Tube Flaring Tool Set Includes Push Connect Double Flare Fuel and Trans Cooler Dies TH1911

  • Dies and adapters to fabricate push connect fittings for 1/4, 5/16 and 3/8".
  • flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
  • Dies and adapters to fabricate GM fuel line flare, brake lines and transmission 5/16 and 3/8".
  • GM transmission cooling line 3/8" and 1/2".
  • Dies and adapters to fabricate metric bubble flare 4.75, 6, 8, and 10mm.
  • Dies have an enlarged compression area to grip the dies better.
  • Flaring tool set includes a Stabilizing Arm for easy tube forming.
Check Stock

ASD 3/16 and 1/4 Brakeline fittings kit nuts unions compression fittings 70 Pieces

  • Auto Supplies Direct (70) Piece 3/16″ & 1/4″ Brake Line Fittings Kit (3/16″ and 1/4″ Tube Nuts, Unions, and Compression Fittings) for Cars and Trucks.
  • Contains a (30) Piece 3/16″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 3/16″ Short Tube Nuts, (10) 3/16″ Long Tube Nuts, and (10) 3/16″ Unions.
  • Contains a (30) Piece 1/4″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 1/4″ Short Tube Nuts, (10) 1/4″ Long Tube Nuts, and (10) 1/4″ Unions.
  • Contains (5) 3/16″ OD Compression Brake Line Fittings.
  • Contains (5) 1/4″ OD Compression Brake Line Fittings.
Check Stock

JEGS Universal Brake Line Kit | Made In USA | Includes 25 Of 3/16 Steel Line PTFE-Lined Stainless Brake Hoses Weld Tabs Clips Female Tees Tube Adapters Fittings And Tube Nuts

  • CONTAINS the parts needed to install new brake lines with braided stainless brake hose on most vehicles.
  • INCLUDES: (1) 25' coil of 3/16" steel brake line, (4) -03AN x 18" PTFE lined stainless steel brake hoses, (4) Brake line weld tabs, (4) Brake line clips, (2) 3/8"-24 inverted flare female tees, (4) -03AN to 3/8"-24 inverted flare female tube adapters, (2) 1/8" NPT to 3/8"-24 inverted flare female fittings, (2) 9/16"-18 Tube Nuts, (2) 1/2"-20 Tube Nuts, (2) 7/16"-24 Tube Nuts, & (20) 3/8"-24 Tube Nuts.
  • INSTRUCTIONS show suggested line routing for traditional rear axles or independent rear suspension.
  • NOTE: ITEMS YOU MAY NEED THAT ARE NOT INCLUDED: caliper and wheel cylinder adapters, brake light switch, tee, and pigtail, residual pressure valves, and tools.
  • MADE IN USA with high quality components and assembly.
Check Stock

4LIFETIMELINES Flaring Tool – Professional Turret Brake Line Flare Tool – 5 Tubing Sizes – Compatible with Stainless Steel Copper Coils

  • 5 TUBING SIZES: The 4LIFETIMELINES heavy duty turret brake line flare tool allows you to create 45 degree highly precise double, single and bubble flares in 5 sizes of tubing, 3/16″, 1/4″, 5/16″, 3/8″ and 4.75mm..
  • COMPATIBLE MATERIALS: This brake flaring tool can work with stainless steel, steel and nickel copper tubing, being a smart and practical solution for brake lines, fuel lines and transmission cooler lines..
  • EASY TO USE: Unlike similar products on the market, this professional flaring tool features a quick-release T handle ensuring fast holder die changeovers for a smooth and user-friendly experience..
  • CONVENIENT TURRET CARRIER: Keep all your dies ready, available and within immediate reach with the convenient turret carrier, which saves you the hassle of groping for small parts or losing them!.
  • PRECISION IS KEY: Keep your brake flares and brake system safe and at optimal length with this highly precise and accurate flaring tool, which requires minimal time, effort and cost!.
Check Stock

Auto Supplies Direct 3-Way Female Brake Line Tee Union Fittings For 3/16\ Tube (3/8\ - 24 Thread, Inverted Flare) (Pack of 3)

  • Auto Supplies Direct 3/16" 3-Way Female Brake Line Tee Fittings Pack of (3) for Cars and Trucks.
  • For Automotive Brake Line Systems, Works With Your Preferred 3/16" Brake Line Of Your Choice.
  • Most Common 3/16" SAE Inverted Flare (3/8" - 24 Thread, Inverted Flare) / Double Flare Size.
  • High Pressure Resistant, Constructed From Safe and Professional Quality Brass, Lead Free.
  • Compatible With 3/16" Steel, Copper, Nickel Poly Armour, and Cupronickel Tubing.
Check Stock