Reviews Flanged Plates

304 Stainless Steel Bench Pedestal - 16.25\ High

  • ROBINSON STEEL COMPANY IS PROUD TO BE THE MANUFACTURER OF THE ONLY FLANGED STYLE 304 GRADE STAINLESS STEEL PEDESTAL MADE IN THE USA.
  • 8.25" diameter x 11 gauge flange plates top and bottom.
  • Heavy Duty Steel Tube: 2" diameter x .12" wall (11 gauge).
  • Steel Tube is welded to top and bottom plate with a full 2" diameter weld 1/8" fillet.
  • Universal pedestal with three holes in top/bottom plate for bench and floor mounting, Stainless steel hardware is provided for mounting to bench tops, Floor anchor bolts are NOT provided..
Check Stock

RIDGID - 41608 RIDGID PTEC 30000 Tubular Tailpiece Extension Cutter, 1-1/4\

  • Executes clean, fast and straight cuts on polyethylene (PE), polypropylene (PP), and thin-wall PVC tubes.
  • This cutter automatically deburrs in parallel to the cutting action so there's no need for a second tool to deburr.
  • Automatic beveling allows for immediate, easy joining to other sink drain pieces.
  • The open bore design allows cutting of double-flanged plastic drain pipe.
  • Tubing cutter has a 1-1/4-inch single-flanged or 1-1/2-inch double-flanged outer diameter capacity.
Check Stock

8020 3330 15 Series 5/16-18 x 0.687 Inch 11/16 Inch Flanged Button Head Socket Cap Screw FBHSCS Bolts 100 Pack

  • This flanged button head socket cap screw is made out of steel with a black zinc finish..
  • The low domed head with a wider bearing surface offer a finished appearance, making them an ideal choice when a neat appearance is desired..
  • This bolt comes with a 0.66" diameter flange head and full thread length of 0.687" with a 3/16 allen hex drive. Thread size is 5/16-18..
  • Used with t-nuts to mount brackets and plates to aluminum extrusions. Quick installation and can be re-purposed over and over..
  • Perfect for your extruded rail projects!.
Check Stock

8020 3330 15 Series 5/16-18 x 0.687 Inch 11/16 Inch Flanged Button Head Socket Cap Screw FBHSCS Bolts 2500 Pack

  • This flanged button head socket cap screw is made out of steel with a black zinc finish..
  • The low domed head with a wider bearing surface offer a finished appearance, making them an ideal choice when a neat appearance is desired..
  • This bolt comes with a 0.66" diameter flange head and full thread length of 0.687" with a 3/16 allen hex drive. Thread size is 5/16-18..
  • Used with t-nuts to mount brackets and plates to aluminum extrusions. Quick installation and can be re-purposed over and over..
  • Perfect for your extruded rail projects!.
Check Stock

The Drum That Beats Within Us

  • Bass drums include telescopic bass drum spurs and matching maple wood bass drum hoops. Toms and snare drums feature 2.3mm triple flanged hoops. All drums are fitted with Remo drum heads.
  • Mounting Hardware: Low profile GTS tom suspension system.
  • Low-profile tom and floor tom leg brackets.
  • Gretsch T-Wing nut/bolt & "Gas cap" bass drum mount plate with "G" memory lock.
  • Hoops - Snare: 2.3mm triple flanged, Toms: 2.3mm triple flanged & Bass: Maple with matching lacquer or wrap inlay.
Check Stock

JSM Bicycle Hub Flanged Axle Nut and Safety Washer Kit, 3 Size for Front and Back Bike Wheel

  • It is made of high strength steel with antirust treatment.
  • Includes 6 sets of 3-size flange nuts and safety washers(for both Metric and British System), suitable for most bicycle replacements.
  • Spec: NUT WM FRT 5/16x26 FLANGED(2 sets), NUT WM FRT 3/8x26FLANGED(2 sets), Metric NUT FLANGED M10*1(2 sets).Please refer to picture.
Check Stock

DW Performance Series 4-Piece Shell Pack with 22 Inches Bass Drum - Gold Sparkle FinishPly

  • 4-piece Maple Shell Pack with 10" and 12" Toms, 16" Floor Tom, and 22" Bass Drum - Gold Sparkle FinishPly.
  • Performance Series Bass Drum - 18 x 22 inch - Gold Sparkle FinishPly: 22" Maple Bass Drum with Maple Hoops - Gold Sparkle FinishPly.
  • Performance Series Floor Tom - 14 x 16 inch - Gold Sparkle FinishPly: 16" Maple Floor Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
  • Performance Series Mounted Tom - 9 x 12 inch - Gold Sparkle FinishPly: 12" Maple Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
  • Performance Series Mounted Tom - 8 x 10 inch - Gold Sparkle FinishPly: 10" Maple Tom with 1.6mm Triple-flanged Hoops - Gold Sparkle FinishPly.
Check Stock

American Lifting AL2300 Floor Jack 3 Ton - Professional Heavy Duty Hydraulic Car Truck SUV Service Jack Red

  • AL2300 is American Lifting 3 Ton heavy duty car floor jack that built with the strength and duability. It is assembled in the USA with USA and global....
  • Heavy gauge contruction, cast iron lift arm and the flanged side plates add the strength and rigidity. The large swivel saddle with the diameter of....
  • AL2300 service jack features in-line pump assembly assures long life and no off-center forces for ease in pumping, aligning and reduce wear. And, its....
  • Patented built-in by-pass device protects hydraulic system from over pumping damage. It also features the metered release system and U-Joint release....
  • This 3 Ton jack is ideal for auto repair services in the shop and garage. In addition, it is covered with 2-Year from the date of the purchase..
Check Stock

15 Amp Flanged Inlet, TOVEN 125V RV Shore Power Inlet NEMA 5-15 Plug RV Receptacle with Waterproof Integrated 18\ Extension Cord & Cover Marine Electrical Inlet ETL Approved

  • 【15 Amp Flanged Inlet】: The flanged inlet material is premium copper and black nylon plastic. None oxidation for the copper pole on the plug. It can avoid ultraviolet degradation and Rain erosion. It is very sturdy and durable, which can work perfectly both indoor and outdoor.
  • 【Weatherproof Design】: Our 15 amp inlet is ETL approved, which means it is the safest quality. The newest weatherproof design back cover will protect it from rainstorms, snow, dust and even works well without crack and leak in the coldest winters..
  • 【Widely Compatible】: This shore power inlet Is a generator or battery charger plug to energize your several electrical devices and electrical appliances at the same time. Widely used in the RV, trailer, camper, car, boat, marine, block heater, home, recessed outlet box, etc.
  • 【Easy Installation】: The flanged power inlet needs 1-3 / 4" hole size, use 4 stainless steel screws (package Include) to firmly fix the straight blade flange entrance on the wall. The male receptacle was equipped with 14AWG 18 inch extension cable. Just need to plug in to connect the power..
  • 【The Wire Up As You Wish】: Choose the length and diameter of the cord based on your need. The Flanged electrical inlet receptacle accommodates 12-18 AWG gauge....
Check Stock

WELLUCK 15 Amp Flanged Inlet 125V, NEMA 5-15 RV Shore Power Inlet Plug w/Waterproof and Back Cover, 2 Pole 3-Wire AC Port Plug, Generator Male Receptacle for Marine Boat RV Shed Electrical Extension

  • 【15 Amp Flanged Inlet】: No oxidation for the Nickel coated copper pole on the plug, made of premium copper and Nylon plastic to avoid the damage of UV degradation and chemicals, rugged and durable for indoor and outdoor..
  • 【Easy Reliable Installation】: 2" Hole size required, clear see-thru wiring block (Black-Hot, Green-Ground, Silver-Neutral), and 4 long Stainless Steel screws will fix straight blade flanged inlet on the hole or wall more tightly. No gap on the edge!.
  • 【 Weatherproof Cover】: ETL approved, and the flanged power inlet cap and back cover will protect it from the rain storm, snows, dust and even works well in Western Colorado winters, without crack and leak..
  • 【Wire Up As You Wish】 : Define the Length and Diameter of the cord based on actual need. Flanged electrical inlet receptacle accommodates 12-18 AWG gauge wires, suitable for No. 12-3 through No. 18-3 cords grip..
  • 【Widely Compatible】: As a generator or battery charger plug to energize your electrical devices. Widely used in trailer, camper, RV, car, boat, marine, block heater,home, bumper, recessed outlet box, etc.
Check Stock

Gretsch CM1E826PWG 2014 Catalina Maple 7-Piece Rock Shell Pack and 22 Inch Kick with Free Additional 8 Inch Tom - Walnut Claze

  • Bass drums include telescopic bass drum spurs and matching maple wood bass drum hoops. Toms and snare drums feature 2.3mm triple flanged hoops. All drums are fitted with Remo drum heads.
  • Mounting Hardware: Low profile GTS tom suspension system.
  • Low-profile tom and floor tom leg brackets.
  • Gretsch T-Wing nut/bolt & "Gas cap" bass drum mount plate with "G" memory lock.
  • Hoops - Snare: 2.3mm triple flanged, Toms: 2.3mm triple flanged & Bass: Maple with matching lacquer or wrap inlay.
Check Stock

The Muppet Show Animal Playing Dw Drums Cute Funny Graphic Fashion T Shirt Gift for Men Top Men s Co DMN Tee Black

  • 4-piece Maple Shell Pack with 10" and 12" Toms, 16" Floor Tom, and 22" Bass Drum - Gold Sparkle FinishPly.
  • Performance Series Bass Drum - 18 x 22 inch - Gold Sparkle FinishPly: 22" Maple Bass Drum with Maple Hoops - Gold Sparkle FinishPly.
  • Performance Series Floor Tom - 14 x 16 inch - Gold Sparkle FinishPly: 16" Maple Floor Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
  • Performance Series Mounted Tom - 9 x 12 inch - Gold Sparkle FinishPly: 12" Maple Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
  • Performance Series Mounted Tom - 8 x 10 inch - Gold Sparkle FinishPly: 10" Maple Tom with 1.6mm Triple-flanged Hoops - Gold Sparkle FinishPly.
Check Stock

Ludwig Supralite Steel Snare Drum 14 x 8 in.

  • 3mm triple-flanged hoops and brass snare wires.
Check Stock