Reviews Flanged Cap Nuts

VIGRUE M6-1.0 x 12/16/20/25/30mm Flanged Button Head Socket Cap Screws 210PCS Stainless Steel 18-8 304 Flange Internal Hex Screws Bolts Nuts Washers Set Kit Full Coarse Thread

  • ✔ Screw Type: Flanged Button Head Screw--ISO 7380-2.
  • Screw Length: 12mm, 16mm, 20mm, 25mm, 30mm.
  • ✔ Package: 210PCS M6 Flange Button Head Socket Cap Screws Nuts wahsers kits.
  • ✔ This kind of screw with low domed button head and a wider flange bearing surface offers good performance, great choice for neat appearance needing..
  • ✔ The flanged button head socket screws are 18-8 stainless steel 304, which offers superior rust and corrosion resistance, with fine workmanship, for a long time use..
Check Stock

Needenr 4 Sets (16pcs) Flanged Hex Head Bolts,M10-1.5x40mm Stainless Steel Flange Hexagon Screws Bolts & Nuts Kits for Exhaust Manifold Hardware Kit M10x40mm M10-1.5x40

  • M10x40 Flanged Hex Head Bolts and Nuts Sets Incluidng: 4PCS M10*40mm Flanged Hex Bolts , 4PCS of M10 Flange Hexagon Nuts.4Pcs of Flat Washers,4Pcs Spring Lock Washers..
  • Aftermarket Exhaust Manifold Hardware Kit.
  • Material Made with Stainless Steel 304 provide good strength and corrosion resistance.
  • M10-1.5Flanged Hex Head Bolts Screws,Thread Diameter 10 mm, Thread Size 1.5 mm .Thread Pitch:40mm.
  • Widely used in a variety of industries such as construction, manufacturing, engineering, assembling,and so on..
Check Stock

JSM Bicycle Hub Flanged Axle Nut and Safety Washer Kit, 3 Size for Front and Back Bike Wheel

  • It is made of high strength steel with antirust treatment.
  • Includes 6 sets of 3-size flange nuts and safety washers(for both Metric and British System), suitable for most bicycle replacements.
  • Spec: NUT WM FRT 5/16x26 FLANGED(2 sets), NUT WM FRT 3/8x26FLANGED(2 sets), Metric NUT FLANGED M10*1(2 sets).Please refer to picture.
Check Stock

Iverntech MGN12 300mm Linear Rail Guide with MGN12H Stainless Steel Carriage Block for Ender 3, Corexy, Tronxy, Delta Kossel 3D Printers Upgrades and CNC Machine

  • Package Includes: 22pcs 20mm corner brackets, 44pcs M5x10mm T-slot nuts, 44pcs M5x10mm flanged button head socket cap screws bolts, 50pcs flat washers and 50pcs lock washers..
  • 2020 Aluminum Corner Bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 Series Aluminum Profile Extrusion..
  • The angle bracket is used to reinforce right-angle corner joints of aluminum extrusion profiles, insert the two ends of the bracket into the groove of the profile, and tighten the screw to fix the two profiles..
  • T-Slot Aluminum Extrusion M5x10mm Hardware Slide In T-Nuts made from high quality carbon steel, surface is plated with nickel for good rust resistance and better performance high hardness and a long service life..
  • 304 stainless steel M5x10mm button head socket cap screws features anti-corrosion, rustless, high-hardnes. M5 flat washers and lock washers can be used to adjust the length..
Check Stock

The Drum That Beats Within Us

  • Bass drums include telescopic bass drum spurs and matching maple wood bass drum hoops. Toms and snare drums feature 2.3mm triple flanged hoops. All drums are fitted with Remo drum heads.
  • Mounting Hardware: Low profile GTS tom suspension system.
  • Low-profile tom and floor tom leg brackets.
  • Gretsch T-Wing nut/bolt & "Gas cap" bass drum mount plate with "G" memory lock.
  • Hoops - Snare: 2.3mm triple flanged, Toms: 2.3mm triple flanged & Bass: Maple with matching lacquer or wrap inlay.
Check Stock

8020 3330 15 Series 5/16-18 x 0.687 Inch 11/16 Inch Flanged Button Head Socket Cap Screw FBHSCS Bolts 100 Pack

  • This flanged button head socket cap screw is made out of steel with a black zinc finish..
  • The low domed head with a wider bearing surface offer a finished appearance, making them an ideal choice when a neat appearance is desired..
  • This bolt comes with a 0.66" diameter flange head and full thread length of 0.687" with a 3/16 allen hex drive. Thread size is 5/16-18..
  • Used with t-nuts to mount brackets and plates to aluminum extrusions. Quick installation and can be re-purposed over and over..
  • Perfect for your extruded rail projects!.
Check Stock

8020 3330 15 Series 5/16-18 x 0.687 Inch 11/16 Inch Flanged Button Head Socket Cap Screw FBHSCS Bolts 2500 Pack

  • This flanged button head socket cap screw is made out of steel with a black zinc finish..
  • The low domed head with a wider bearing surface offer a finished appearance, making them an ideal choice when a neat appearance is desired..
  • This bolt comes with a 0.66" diameter flange head and full thread length of 0.687" with a 3/16 allen hex drive. Thread size is 5/16-18..
  • Used with t-nuts to mount brackets and plates to aluminum extrusions. Quick installation and can be re-purposed over and over..
  • Perfect for your extruded rail projects!.
Check Stock

New 58 Pcs Pro-Series 1/2\ T-Slot 3/8\-16 Stud Clamping Kit for Bridgeport Mill

  • Made of high quality casting steel for long life and increased durability..
  • 24 Studs: 4 each of length: 3"-4"-5"-6"-7"-8" 6 T-Nuts to fit your machine 6 Flange Nuts 4 Coupling Nuts 4 Flanged Nuts 6 Step Blocks 6 Step Clamps.
Check Stock

Glarks 50Pcs 1/4 -20x20mm Threaded Inserts Nuts Zinc Plated Carbon Steel Hex Socket Drive Furniture Flanged Screw-in Nut with M6 Hex Wrench for Wood Furniture 1/4 -20 x 20mm

  • ♛【What You Get:】 In this set, you will get 50pcs threaded insert nuts, which Internal thread insert type is 1/4"-20, external diameter is 10.5mm/0.41inch, total length is 20mm. Along with a 6mm hex wrench to help your installation more fast and convenient..
  • ♛【High Quality:】 All the inserts nuts are made of high quality carbon steel and with yellow zinc plated on the surface, make them have high hardness, perfect wear and rust resistance, smooth surface without burr, non-slip flanged design..
  • ♛【Product Feature:】Our insert nuts are constructed with standard hex socket head, smooth and flat, features flanged thread texture, strong and durable, good for your wood furniture use..
  • ♛【Easy to Use:】 First using the bit to pre-drill a well-sized hole, which depth is 1-2mm longer than furniture screw, then use the internal hex wrench to screw in. Please attention that if the furniture wood is with high-hardness, please enlarge the screw hole..
  • ♛【Wide Application:】 These inserts nuts are strong and durable will works good for for soft woods of pine, plywood, fiberboard.
  • also great used for hard wood, such as solid wood, have a good effect in the advanced furniture combination..
Check Stock

Glarks 216Pcs 3030 Series Aluminum Profile Connector Set Include 20Pcs 3030 Corner Bracket, 40Pcs M6 T Nuts, 4Pcs 3-Way End Corner Bracket Connector, M5 x 20 Button Head Screw Bolts and Flat Washers

  • ♛【What You Get】: Our 3030 series aluminum profile connector set include 20pcs 3030 corner bracket, 40pcs m6 t-slot nuts, 4pcs 3-way end corner bracket connector, 40pcs flanged button head socket cap screws bolts, 40pcs flat washers and 40pcs lock washers, 32pcs allen head socket set screws, total 216pcs are well packed avoid mess..
  • ♛【Durable Quality】: The corner brackets are made of aluminum, the socket cap screws and nuts washers are made of high quality 304 stainless steel, anti-rust and corrosion resistance, can be applied for a long time, you won't worried broken after installed..
  • ♛【Easy to Use】: Our angle bracket is mainly uesd to reinforce right-angle corner joints of aluminum extrusion profiles, easy to use no tool needed. Insert the two ends of the bracket into the groove of the profile, put on the flat washer and lock washer, and tighten the screw to fix the two profiles..
  • ♛【3030 Series】: Our corner bracket set is fit for 3030 series aluninum extrusion, can be used DIY 3D printers, CNC routers, CNC laser cutters, robotics projects and so on..
  • ♛【Wide Application】: Our complete corner bracket kit are matched well with each other, can be widely used in home, office and factory area, like the connection of cabinets, tab....
Check Stock

Glarks 120Pcs 1/4\-20, 5/16\-18 Threaded Inserts Nuts Assortment Set, Zinc Plated Carbon Steel Hex Socket Drive Furniture Flanged Screw-in Nut with M6 M8 Hex Wrench for Wood Furniture

  • ♛【What You Get:】 In this inserts nuts set, you will get 120pcs 1/4"-20, 5/16"-18 threaded nuts assorted kit for your wood furniture use. Which are constructed with standard hex socket head, smooth and flat, features flanged thread texture. Along with 2 hex wrench to help your installation more fast and convenient..
  • ♛【High Quality:】 All the inserts nuts are made of high quality carbon steel and with yellow zinc plated on the surface, make them have high hardness, perfect wear and rust resistance, smooth surface without burr, non-slip flanged design..
  • ♛【Product Size:】 80pcs nut which Internal thread insert type is 1/4"-20, external diameter is 10.5mm/0.41inch. 4 sizes of 1/4"-20x10mm, 1/4"-20x15mm, 1/4"-20x20mm, 1/4"-20x25mm.
  • 40pcs nut which Internal thread insert type is 5/16"-18, external diameter is 14mm/0.55inch. 4 sizes of 5/16"-18x12mm, 5/16"-18x15mm, 5/16"-18x20mm, 5/16"-18x25mm, with m6 m8 hex wrench. Multiple size meet your different needs..
  • ♛【Easy to Use:】 First using the bit to pre-drill a well-sized hole, which depth is 1-2mm longer than furniture screw, then use the internal hex wrench to screw in. Please attention that if the furniture wood is with high-hardness, please enlarge the screw hole..
Check Stock

Gretsch CM1E826PWG 2014 Catalina Maple 7-Piece Rock Shell Pack and 22 Inch Kick with Free Additional 8 Inch Tom - Walnut Claze

  • Bass drums include telescopic bass drum spurs and matching maple wood bass drum hoops. Toms and snare drums feature 2.3mm triple flanged hoops. All drums are fitted with Remo drum heads.
  • Mounting Hardware: Low profile GTS tom suspension system.
  • Low-profile tom and floor tom leg brackets.
  • Gretsch T-Wing nut/bolt & "Gas cap" bass drum mount plate with "G" memory lock.
  • Hoops - Snare: 2.3mm triple flanged, Toms: 2.3mm triple flanged & Bass: Maple with matching lacquer or wrap inlay.
Check Stock

Canitu 135Pcs Threaded Inserts Nuts Assortment Set, Zinc Plated Carbon Steel Hex Socket Drive Furniture Flanged Screw-in Nut with M4 M5 M6 M8 M10 for Wood Furniture with 5Pcs Hex Wrench

  • ☼ Threaded insert nuts provide a strong, permanent thread for wood and wood based sheet materials. The unique external thread ensures strong resistance against pull out and the flanged head prevents splitting of the surfaces and driving the Insert in too far..
  • ☼ High quality carbon steel with high hardness. These furniture screws are wear-resistant and very durable to use. Standard internal hex socket type without burr and non-slip design. Yellow zinc plated surface, anti-corrosion and anti-oxidation, with no burr and flanged anti-slip design, wear-resistant and very practical..
  • ☼ Convenient to use and carry. Pre-drill a proper hole (Suggest that the diameter of the hole is 9.6 +/- 0.2mm, the length is about 18mm), then use our internal hex wrench to screw in. Tip: If the furniture wood is with high-hardness, please enlarge the hole..
  • ☼ Total quantity: 135 pieces of Hex Inserts Nuts & 5Pcs of matching wrenches (35pcs M4*10, 30pcs M5*10, 25pcs M6*10, 10pcs M6*15, 15pcs M8*15, 10Pcs M8*20, 5pcs M10*20). Storage in a plastic case for easy acces..
  • These inserts nuts are strong and durable will works good for for soft woods of pine, plywood, fiberboard.
  • also great used for hard wood, such as solid wood, have a good effect in the advanced furniture com....
Check Stock