Reviews Flanged Ball Bearing

Boston Gear PS211/8 Mounted Bearing, Pressed Steel Housing, 1.125\ Bore, 0.375\ Bolt Size

  • Light duty flanged bearing with 2 bolt holes.
  • Pressed steel housing for strength and durability.
  • Deep groove ball bearings for high radial and thrust loads.
  • Set screws for secure attachment to shaft.
  • Lubricated at manufacturer for maintenance-free service.
Check Stock

Boston Gear PS211/16 Mounted Bearing, Pressed Steel Housing, 1.063\ Bore, 0.375\ Bolt Size

  • Light duty flanged bearing with 2 bolt holes.
  • Pressed steel housing for strength and durability.
  • Deep groove ball bearings for high radial and thrust loads.
  • Set screws for secure attachment to shaft.
  • Lubricated at manufacturer for maintenance-free service.
Check Stock

SKF F4B 108-FM Ball Bearing Flange Unit, 4 Bolts, Eccentric Collar, Regreasable, Contact Seal, Cast Iron, 1-1/2\ Bore, 4\ Bolt Hole Spacing Width, 5310lbf Dynamic Load Capacity

  • Cast iron flanged housing for vibration damping and structural rigidity.
  • Double-sealed, deep-groove ball bearing insert with an extended inner ring for applications with radial, thrust, and combined loads.
  • Acrylonitrile-butadiene rubber (NBR) contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Eccentric locking collar for securing the bearing onto the shaft.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

(4 Pack) PGN 3/4\ x 1-3/8\ Flanged Ball Bearing - Replacement for Lawnmower, Carts & Hand Trucks Wheels, and Wheelbarrows - Chrome Steel - Lubricated

  • 100% Chrome Steel for higher resistance and durability.
  • Applicable for wheels on Lawn Mower, Garden Carts, Pressure Washers, Generators, Air compressors, and more..
Check Stock

SKF F4BM 207-TF Ball Bearing Flange Unit, 4 Bolts, Medium Duty, Set Screw Locking, Seals with Flingers, Cast Iron, 2-7/16" Bore, 5-5/8" Bolt Hole Spacing, 11840lbf Dynamic Capacity

  • Cast iron flanged housing with a solid base for vibration damping and structural rigidity.
  • Standard-duty, deep-groove ball bearing insert for applications with moderate radial loads and light to moderate thrust or combination loads.
  • Felt labyrinth seals on both sides of the bearing keep lubricant in and contaminants out and flingers provide extra sealing protection.
  • Setscrew lock for a three-point contact hold on the shaft.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

NTN ASPF205-100 Light Duty Flange Bearing, 3 Bolts, Setscrew Lock, Non-Relubricatable, Contact Seals, Pressed Steel, Inch, 1\ Bore, 2-63/64\ Bolt Hole Spacing Width, 3-3/4\ Height, 1770 Static Load Capacity, 3150 Dynamic Load Capacity

  • Pressed steel flanged housing for light-duty applications with low to moderate speeds.
  • Light-duty, double-sealed radial ball bearing insert with a narrow inner ring accepts moderate radial loads and light thrust or combination loads.
  • Synthetic rubber lip contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Setscrew lock for a three-point contact hold on the shaft.
  • Extended inner ring for increased shaft support.
Check Stock

Sealmaster MFC-20 Medium Duty Piloted Flange Cartridge, 4 Bolt, Regreasable, Felt Seals, Setscrew Locking Collar, Cast Iron Housing, 1-1/4\ Bore, 5\ Overall Length, 2.917\ Bolt Hole Spacing Width, 3/8\ Flange Height, ±2 Degrees Misalignment Angle

  • Cast iron flanged housing with a pilot extension for accurate location and increased stability.
  • Medium-duty, deep-groove ball bearing insert for applications with moderate to high radial loads and moderate thrust or combination loads.
  • Felt labyrinth seals on both sides of the bearing keep lubricant in and contaminants out and flingers provide extra sealing protection.
  • Setscrew lock for a three-point contact hold on the shaft.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

Sealmaster SF-24 Standard Duty Flange Unit, 4 Bolt, Regreasable, Felt Seals, Setscrew Locking Collar, Cast Iron Housing, 1-1/2" Bore, 5-1/8" Overall Length, 4" Bolt Hole Spacing Width, 9/16" Flange Height, ±2 Degrees Misalignment Angle

  • Cast iron flanged housing with a solid base for vibration damping and structural rigidity.
  • Standard-duty, deep-groove ball bearing insert for applications with moderate radial loads and light to moderate thrust or combination loads.
  • Felt labyrinth seals on both sides of the bearing keep lubricant in and contaminants out and flingers provide extra sealing protection.
  • Setscrew lock for a three-point contact hold on the shaft.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

Sealmaster MSF-35 Medium Duty Flange Unit, 4 Bolt, Regreasable, Felt Seals, Setscrew Locking Collar, Cast Iron Housing, 2-3/16" Bore, 6-7/8" Overall Length, 5-5/8" Bolt Hole Spacing Width, 13/16" Flange Height, ±2 Degrees Misalignment Angle

  • Cast iron flanged housing with a solid base for vibration damping and structural rigidity.
  • Medium-duty, deep-groove ball bearing insert for applications with moderate to high radial loads and moderate thrust or combination loads.
  • Felt labyrinth seals on both sides of the bearing keep lubricant in and contaminants out and flingers provide extra sealing protection.
  • Setscrew lock for a three-point contact hold on the shaft.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

Yukon Gear & Axle (CK D44) Carrier Installation Kit for Dana 44 Differential

  • Yukon replacement axle bearing and seal kits are specially designed for each application and use all high quality bearings and seals.
  • Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20.
  • This axle bearing and seal kit services one side only.
Check Stock

WJB WS4250 Oil and Wheel Seal Replaces 4250

  • The flanged design allows for an easier and secure installation. This ensures a longer service life for the bearing.
  • Outside ridges of the seal offer a secure and proper fit within the bearing.
  • Enhanced performance in a wide range of temperatures and fluid environments allows for increased reliability for wheel end performance.
  • An extra dust lip Offers enhanced dirt exclusion, keeping the wheel bearing protected from contaminates that could damage/ruin it. This saves costs as it keeps the bearing from needing to be replaced.
  • Machined rubber sealing Offers accuracy and consistency for a leak-proof seal, which retaining oil and grease and repelling water, preventing the bearing from rusting over..
Check Stock

Spicer Rear Axle Bearing and Seal Kit For 1997-2006 Jeep TJ With Dana 44

  • Yukon replacement axle bearing and seal kits are specially designed for each application and use all high quality bearings and seals.
  • Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20.
  • This axle bearing and seal kit services one side only.
Check Stock

WJB WS9150S Oil and Wheel Seal Replaces 9150S

  • The flanged design allows for an easier and secure installation. This ensures a longer service life for the bearing.
  • Outside ridges of the seal offer a secure and proper fit within the bearing.
  • Enhanced performance in a wide range of temperatures and fluid environments allows for increased reliability for wheel end performance.
  • An extra dust lip Offers enhanced dirt exclusion, keeping the wheel bearing protected from contaminates that could damage/ruin it. This saves costs as it keeps the bearing from needing to be replaced.
  • Machined rubber sealing Offers accuracy and consistency for a leak-proof seal, which retaining oil and grease and repelling water, preventing the bearing from rusting over..
Check Stock