Reviews Flange Ansi B16 5

Anderson Metals - 56120-0604 Brass Pipe Fitting Adapter 1/4 Male Pipe x 3/8 Female Pipe

  • Adapter for connecting pipes or fittings of different types.
  • Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance.
Check Stock

Anderson Metals - 38110-2016 Brass Threaded Pipe Fitting, Hex Bushing, 1-1/4' Male x 1 ' Female

  • Hex bushing for connecting two pipes or with different diameters.
  • Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Anderson Metals 56120-0806 Brass Pipe Fitting, Adapter, 3/8' Male Pipe x 1/2' Female Pipe

  • Adapter for connecting pipes or fittings of different types.
  • Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends. Please see NPT Thread - chart to determine the correct size required. Pipe Size and actual Thread OD are different. The Thread OD is larger than the Pipe Size..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Proline Frost Proof Sillcock 1/2 " Copper,12 " L,3/4 " Mht Chrome Plated

  • Prevents outside faucet freezing. Chrome-plated brass body and tube. Lead-free silver solder construction. Built-in lock-shield. 3/4" hose thread outlet..
  • The sillcock drains automatically upon water shut off, if the hose is removed or open. 1/2" nominal copper sweat or 1/2" M.I.P. Import. The sillcock drains automatically upon water shut off, if the hose is removed or open..
  • 1/2 in MIP x 1/2 in Sweat. Heavy chrome plated brass, silver soldered construction. Notched flange for stable installation. Chrome plated casting and tube, lock shield, 3/4 in hose thread outlet, heavy cast iron handle..
  • Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, solder connections comply with ANSI B16.18. CSA certified ANSI/NSF 61-9. UPC coded. Bulk handy carton..
  • Prevents outside faucet freezing. Chrome-plated brass body and tube. Built-in lock-shield. 3/4in hose thread outlet. The sillcock drains automatically upon water shut off, if the hose is removed or open..
Check Stock

M10 x 1.5mm Flange Nuts, binifiMux Diameter 10Pcs Serrated Hex Flange Lock Nuts 304 Stainless Steel

  • Made of 18-8 (A2) stainless steel 18-8 which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
  • Serrations help grip the material surface for easy installation and provide mild vibration resistance..
  • Nuts Height: 0.17 inch, Flange Diameter: 0.42 inch.
Check Stock

Brass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated

  • 【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
  • 【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
  • 【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
  • 【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
  • 【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....
Check Stock

ISOtunes Wired Earplug Headphones, Recently Improved, 29 NRR, Noise Cancelling Mic, IPX5 Waterproof, Ultra-Durable Braided Wire, OSHA Compliant Noise Isolating Earbuds

  • ❎ BLOCK NOISE: ISOtunes proprietary TRILOGY heat-activated memory foam eartips maximize noise isolation, comfort, and sound quality. ISOtunes Wired comes with 3 pairs of foam eartips, 2 pairs of triple-flange silicone eartips, and 2 pairs of single-flange silicone eartips. Also includes snap-shut travel case..
  • ☑️ CERTIFIED HEARING PROTECTION: ISOtunes Wired hearing protection headphones are ANSI-certified and OSHA-compliant with a 29 dB Noise Reduction Rating (NRR) and ISOtunes 82 dB SafeMax Technology..
Check Stock

Lamerto OBD2 Budget D & B-series Tucked Engine Harness for Ci-vic Integra B16 B18 D16

  • Lamerto Engine Harness CNCH-OBD2-1 Replacement for Hon-da Ci-vic / Inte-gra B16 B18 D16.
  • Will fit for following models: Hon-da Ci-vic Inte-gra B16 B18 D16.
  • Please carefully check the OEM part number and illustrations to make sure it is compatible with your car..
Check Stock

JET 2-HDT 2-Ton Manual Trolley 262020

  • SAFETY: Built-in bumper guards on the side plates increase safety, and extend trolley life..
  • VERSATILITY: Easily adjusts to wide-flange H-beams, standard I-beams, or curved track..
  • DURABILITY: Welded all-steel frame and powder coat finish provide maximum protection..
  • CERTIFICATION: Load-tested to 125% of capacity with certificate..
  • COMPLIANCE: Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards..
Check Stock

Mr Shave B-Series B16 B17 B18 VTEC Low-Profile Slim Valve Cover Hardware Washer Bolt Color Black

  • For Acura and for Honda B-Series Vtec Low Profile Aluminum Valve Cover Washer.
  • Complement your Low-Profile Valve Cover Hardware with Lower Control Arm Dress-Up Washers. For Vtec Engines only..
  • Fit B-Series - B16A2 / B16A3 / B17A1 / B18C1 / B18C5.
  • High performance, meets or exceeds OEM standards, 100% tested before shipping.
  • Compatible for OEM Valve Covers As Well As OEM And Most Aftermarket Spark Plug Wire Covers.
Check Stock

Dewhel B-SERIES B16 B17 B18 VTEC LOW-PROFILE SLIM VALVE COVER HARDWARE WASHER BOLT Color Black

  • Compatible with Acura / Honda B-Series Vtec Low Profile Aluminum Valve Cover Washer.
  • Complement your Low-Profile Valve Cover Hardware with Lower Control Arm Dress-Up Washers. For Vtec Engines only..
  • Fit B-Series - B16A2 / B16A3 / B17A1 / B18C1 / B18C5.
  • Made By OEM Approved and ISO Certified Manufacturers With Materials That Meets Or Exceeds Strict OEM Requirements.
  • Compatible With OEM Valve Covers As Well As OEM And Most Aftermarket Spark Plug Wire Covers.
Check Stock

TASAN RACING B-Series B16 B17 B18 VTEC Low-Profile Slim Valve Cover Hardware Washer Bolt Blue

  • Material Type:Made of high quality materials.
  • Fitment:Fit for B-Series - B16A2 / B16A3 / B17A1 / B18C1 / B18C5.
  • Complement your Low-Profile Valve Cover Hardware with Lower Control Arm Dress-Up Washers. For Vtec Engines only..
  • Compatible With OEM Valve Covers As Well As OEM And Most Aftermarket Spark Plug Wire Covers..
  • Packing Include:4 x 67mm Mounting Bolts, 4 x 26mm Mounting Bolts, 4 x 22mm Mounting Bolts, 4 x 11mm Mounting Bolts,12 x Aluminum Washers, 8 x O-Ring Gaskets..
Check Stock

BLACKHORSE-RACING 3' Vband 90 Degree Elbow Adapter Flange Kit to T4 Turbo 304 Stainless Steel Cast

  • ▲ 304 Stainless Steel Cast and Machined Adapter, with Tight Radius. Works for Many Turbo Applications. Vband Flange Allows Rotation of the Turbo At Any Angle. Flange Is Threaded with 4 M10x1.5 Holes.
  • ▲ Cast Turbo Elbow Adapter + Vband Flange and Clamp Kit, One Pair. T4 to 3" V-Band.
  • ▲ Flange Is Threaded with 4 M10x1.5 Holes, T4 Turbo Flange (to Turbo Side).
  • ▲ 3" Vband Flange (to Header/Manifold Side).
  • ▲ Thanks for your encouraging review and feedback! It really increases our service level and passion of work! Incase you meet problem with our products, please contact us first before you give feedback and review. We will assure you will get the best solution and service..
Check Stock