Reviews Fixed Pulleys

Sterling PULZ8 Single Swivel Pulley Wheel, Silver

  • High quality materials: Our pulley wheel made of 304 stainless steel, Rugged nylon sheave ,wear-resistant, rust-proof and durable, suitable for all types of wet and difficult outdoor environments..
  • Effort-saving Design : The fixed pulley prevents the rope from twisting, The smooth roller ensures a good movement of the rope..
  • Quiet Pulley Wheel:Our pulley wheel uses flexible and smooth wheels can reduce the noise and would not affect surrounding life at all..
  • Easy to Use : Flexible sliding pulleys that can withstand heavy loads.
  • Wide Applications : Rotating pulleys can be used with indoor or outdoor ropes or cords for flexible sliding..
Check Stock

scottchen PRO 3' Heavy Duty Garage Door Pulley Kits, 3/8' Arbor 200LB Load, 4 Sheave Pulleys, 2 Clevis Forks, 4 Bolts and Nuts Kit

  • 【Function】This 3in garage door pulley kit designed to repair or replace damaged parts of your old, worn, noisy and jumping doors. Provide a quiet, smooth and pleasant door opening/closing..
  • 【Compatible】The 3in sheave pulley is 3/8” bore and 3/8” cable groove, which adapt to most commonly garage doors and accept max 5/16” diameter pulling cable or straps..
  • 【Valued Package】The package include 4 pulleys and 2 clevis forks, this can be used as 2 fixed pulleys plus 2 sliding clevis wheel pulleys, fulfill your various demand. Coming with 4 screws and nuts, saving your time to look for from drawer or corner..
  • 【High Quality】The garage door pulley system is heavy duty, 200lb load rating for doors up to 400lb. Durable steel construction, center race with 9 ball bearings and pre-lubricated in factory for smooth sliding..
  • 【Kindly Reminder】Professional installation is recommended. If DIY, please remember wearing safety guard always, using the proper tools and install properly..
Check Stock

Boat Pulley Blocks, Sailing Pulley Stable Stainless Steel Easy to Disassemble with Bearing for Boat for Canoe for Kayak

  • the pulley comes with high-quality nylon card slot design.
  • -The single pulley roller is made of steel, and it is strong, anti-rust, wear-resistant, corrosion-resistant and durable..
  • -The fixed pulley prevents the rope from twisting. The smooth roller ensures a good movement of the rope..
  • -Rotating pulleys can be used with indoor or outdoor ropes or cords for flexible sliding..
  • -Flexible sliding pulleys that can withstand heavy loads.
Check Stock

TooTaci 25MM Pulley Block System for Lifting with Rope and Hooks, 2pcs 304 Stainless Steel M25 Lifting Pulley Block Cable Wire Towing Wheel,66ft Nylon Rope & 2pcs Carabiner Hook

  • ... Rope Kit : 2Pcs 25MM Crane pulley wheel,2Pcs x Carabiner Snap Hook Clips,20 meter Nylon Pulley Line rope.Loading 150 kg/300LB.
  • M25 Pulley Block: Heavy Duty Pulley is anti-rust and wear resistance with strong structure, surface is shock light processing, whose main material is 304 stainless steel..
  • Ergonomic Design : Pulleys for lifting fixed top for easily rope handling, smooth roller provides pretty good rope traverse, pulley rotation cylinder head is solid, durable, 360 degrees rotation to prevent rope from knotting.
  • Pulleys for lifting with Rope and Hook: 66ft solid braided polypropylene pulley rope - extreme strong with high tenacity.
  • Pulleys for Carabiner: Versatile binding, rigging & anchoring hardware - quick connect/dis-connect of ropes, chains, straps..
  • Outdoor Pulley System Lifting widely use for Make an Easy Pulley System for fastening rope to flagpole, small boats, awnings, blinds,....
  • As a topping lift for a portable garage door.
  • Works well for bird feeder pulley system,clothesline pulley system outdoors,garage pulley system,treehouse pulley system,gym pulley system...pull and climbing ropes to raise and lower.
  • Used to fit and tension a sail shade,....
  • fit for steel wire rope or any strong rope,for indoor outdoor lifting applications..
Check Stock

Truth or Dare?

  • Aluminum alloy material, light weight, surface oxidation treatment, corrosion resistance, strong and durable..
  • The shaft collar can be fixed by high-strength bolt clamping, which will not hurt the shaft..
  • Easy to disassemble and install, suitable for frequent disassembly..
  • Shaft rings are often used as stoppers, or to position and hold timing pulleys, etc..
  • Application scope:It’s suitable for use in various applications, including in the manufacturing industry to locate components on a conveyor belt system.Easy installation, corrosion resistance, rust prevention, high strength and long service life.
Check Stock

Camshaft Pulley Holder Crankshaft Harmonic Damper Pulley Holding Removal Tool Compatible with Toyota Lexus

  • 1X crankshaft damper pulley holding tool.
  • Camshaft Pulley Holder Tool: Used it to held the pulleys when remove camshaft pulleys, have two grooved pins to hold camshaft sprockets stationary to remove the bolts, requivalent OEM W89208, compatible with Toyota, Nissan, Camry, Mazda, OHC and many others, the distance between of two grooved pins is 2.36 inches, so please carelly check the size bedfore order.
  • Crankshaft Damper Pulley Holder Tool: Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on engines. only Compatible with Lexus from 1990: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Compatible with Toyota from 1996 : 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. fit 4 cyl engine : 1983-1995 22RE, 1995-2004 2RZ,1995-2004 3RZ.
  • Worked Well: The camshaft pulley holder tool have enougt depth to lock the camshaft sprocket, make it fixed, and with rubber handle, not hurt your hands, make replace cam shaft gears and seals more easy.
Check Stock

Browning 16HB100 Steel Stock Minimum Bore Gearbelt Pulleys for H075 and H100 Belts, 1/2\ Pitch, 0.75\ and 1\ Wide

  • Fixed pulleys are sized to avoid overloading cooler motors that are installed without using an Ammeter.
  • Always use pulley size recommended by cooler manufacturer.
Check Stock

Mytee Products Snatch Block with Hook WLL 2 Ton 3 Sheave 3/8 Inch Wire Rope Wrecker Roll Back Recovery

  • The snatch block is a pulley system with covered and protected yet removable sides..
  • Snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point..
Check Stock

Mytee Products Snatch Block with Hook WLL 8 Ton 6 Sheave 3/4 Inch Wire Rope Wrecker Roll Back Recovery

  • The snatch block is a pulley system with covered and protected yet removable sides..
  • Snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point..
Check Stock

Mytee Products Snatch Block with Hook WLL 4 Ton 4 1/2\ Sheave 1/2 Inch Wire Rope Wrecker Roll Back Recovery

  • The snatch block is a pulley system with covered and protected yet removable sides..
  • Snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point..
Check Stock

Genuine Gates 36113 DriveAlign Belt Drive Idler/Tensioner Pulley

  • Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.Additional hardware included with most idler pulleys to make installation easier..
  • Original Equipment (OE) Exact - Looks and fits just like the OE Bearing meets or exceeds OE specifications and is designed for application-specific speed and load requirements.
  • Steel or thermoplastic construction provides high durability for extended life.
  • Industry's best light-duty coverage and consistently first to market for late model application coverage.
  • Vibration damping system extends life of tensioner and other accessory components.
Check Stock

OTC 4754 Universal Pulley Holder Wrench with Interchangeable pins

  • Universal design fits many different sized pulleys having slots or holes, such as camshaft pulleys and crankshaft pulleys.
  • Wrench is adjustable from 1-1/2 to 8-5/8 inches, allowing it to work with a wide variety of pulleys.
  • Includes 4 different sets of interchangeable step pins.
  • Long handle enables you to easily hold the pulley when tightening or loosening retaining bolts.
  • Rugged blow-molded storage case keeps set components contained and organized so they are ready to use when you need them.
Check Stock

Shoulder Exercise Pulley Wall Mount Bracket Shoulder Pulley Wall Bracket Fixed Wall Support(1 Stainless Steel Pulley)

  • Pulleys can be rotated 360 degrees, large handles are easy to grasp,send a non-slip glove.
  • The 2.4m rope can be adjusted easily for proper fit.
  • Effectively relieves soreness in the shoulders and arms and improves the flexibility of arm.
  • Bracket and pulley are made of stainless steel, the total weight is 1.3kg.
  • The length of the bracket is 40cm, with two expansion screw fixed on the wall, can withstand the weight of 100kg.
Check Stock