Reviews Fitting Hose Hydraulic

TIKSCIENCE Bleed Tube with Bridge Tube for Seastar Hydraulic Steering Systems Hydraulic Steering Filler Kit

  • Application - Hydraulic steering filler bleed tube kit fit Seastar hydraulic steering systems.
  • Package Includes: Bleed kits include bridge tube and bottle to tube, used to replenish the steering system fluid of ships, hose with screw cap which....
  • Save Your Money - Hydraulic steering filler kit used to replenish oil for the ship's steering system fluid, entire steering system remains sealed....
  • Simple to Use - Connect the steering fluid bottle to the fitting with the adapter hose and vent the bottle per the instructions on the hose and bottle....
  • Service - Undergoes more stringent testing than aftermarket products, you will get a 90-day shelf life for our store. If you have any questions about....
Check Stock

Hydraulic A/C Hose Crimper Hydraulic A/C Crimping Tool Hydra-crimp for Barbed and Beaded Hose Fittings

  • Repair AC Hoses on the Vehicle.Automotive AC hose crimping tool is apply for beadlocking fitting and barrier A/C hose..
  • The lightweight hand-held hydraulic hose crimper is very portable and ideal for shop and field applications..
  • This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice.
  • The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws.
  • The Hose Crimper Kit comes with a complete set of dies covering hose sizes:6 SRB, 6-8 SRB, 10 SRB,12 SRB, #8, #10,#12.
Check Stock

Esco 10202 Pro Series Combination Bead Breaker Kit with 5 Quart Hydraulic Pump

  • Includes model #10101 Combi Hydraulic Bead Breaker.
  • 5 quart hydraulic pump with durable metal reservoir and aluminum air motor.
  • 8 ft. hydraulic hose with swivel fitting and coupler.
  • Kit includes air pressure regulator that regulates the inbound air pressure to 110 psi which prevents damage to the seals and hydraulic system.
  • Works on all single, two and three piece wheels.
Check Stock

Esco 10820 Pro Series Combi Bead Breaker Kit with Pump

  • Includes model #10895 Combi Bead Breaker.
  • 5 quart hydraulic pump (10,000 psi) with durable aluminum air motor.
  • 8 ft. hydraulic hose with swivel fitting and coupler.
  • Kit includes air pressure regulator that regulates the inbound air pressure to 110 psi which prevents damage to the seals and hydraulic system.
  • Works on all single, two and three piece wheels.
Check Stock

6505-08-08 Hydraulic Fitting 1/2\ Female JIC Swivel X 1/2\ Male Pipe Carbon Steel

  • 6505-08-08 HYDRAULIC FITTING 1/2" FEMALE JIC SWIVEL X 1/2" MALE PIPE (Tube O.D. / Hose I.D. Size).
  • THREAD SIZES FOR 6505-08-08 HYDRAULIC FITTING 3/4"-16 FEMALE JIC SWIVEL X 1/2" MALE PIPE.
  • THIS PART NUMBER IS OFTEN REVERSED IN THE INDUSTY. PLEASE VERIFY THE THREAD SIZES BEFORE PURCHASING.
  • TO MEASURE THREAD SIZE, CALIPERS WORK BEST.
Check Stock

Hydraulic Hose Crimper Hydra-Krimp 71500,Manual AC Hose Crimper Kit Air Conditioning Repaire Handheld,Hydraulic Hose Crimping Tool with 7 Die Set for Barbed and Beaded Hose Fittings

  • Repair AC Hoses on the Vehicle.Automotive AC hose crimping tool is apply for beadlocking fitting and barrier A/C hose..
  • The lightweight hand-held hydraulic hose crimper is very portable and ideal for shop and field applications..
  • This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice.
  • The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws.
  • The Hose Crimper Kit comes with a complete set of dies covering hose sizes:6 SRB, 6-8 SRB, 10 SRB,12 SRB, #8, #10,#12.
Check Stock

Mastercool Blue 71500-A Hydra-Krimp AC Hose Crimper,Black

  • ACCEPT NO IMITATIONS, Mastercool’s US designed A/C crimper has been the standard for over 25 years.
  • IDEAL FOR SHOP AND FIELD APPLICATIONS, the mobility of the 71500 allows the technician to work directly to repair or fabricate a/c hoses on the....
  • HYDRAULIC BODY CREATES OVER 10,000 PSI OF PRESSURE allowing technicians to recrimp existing hose assemblies that might have a leak.
  • MASTERCOOL’S DIES ALLOW FOR AN OE DESIGN 6 SEGMENTED CRIMP to ensure no leaks.
  • EASY TO USE HYDRAULIC HAND-HELD PUMP crimps the hose fitting in under 10 pumps.
Check Stock

Mophorn 150HP Hydraulic Outboard Steering Kit Boat Marine System

  • 150 HP Hydraulic Steering Kit: The HK4200A-3 hydraulic outboard boat steering kit includes a balanced steering cylinder, a low-friction helm, two lengths of 20ft hose, and a fill kit. It will perfectly replace your aging or broken equipment..
  • Built-in Two-way Lock Cylinder: Output force: 409.7 kgf. The cylinder has a built-in two-way locking valve, which eliminates rebound torque during torsion. The robust barrel design and the sealing system can withstand the harsh environment..
  • Max. 150HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The low friction helm for smooth and comfortable steering. And it has a replaceable shaft seal that can be easily replaced..
  • Cut-to-length Hoses: Our high-strength nylon hose is equipped with quick-fit 1/4'' pipe fitting for easy and fast installation and multiple re-uses. Each hose is 20' long and can be cut for your specific installation, accommodating most boats..
  • Great Partner for Your Boat: Our hydraulic steering kit is for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables — and outboard....
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • ...er cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect male, 1pc 6AN to 5/16" hose adapter fitting..
  • 5.Professional installation recommended: PTFE hose ....
Check Stock

VEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System

  • Hydraulic Outboard Boat Steering Kit: The hydraulic outboard boat steering kit includes a steering cylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
  • Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
  • Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
  • Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
  • Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offsho....
Check Stock

Mardatt 7 Pcs Automobile Hose Remover Pliers and Hook Set Include Brake Line Pinch Pliers, Separator Pliers, Fastener Remover Hook, Pipe Repairing Tool for Auto Radiator Vacuum Hoses Trim O Ring

  • ...hoses, transmission lines, heating lines, or any other rubber hose for installation joints in real time..
  • 【Multi Function】Work great for removing all kinds of difficult dismantling pipes, such as air pipes, power auxiliary pipes, cooling oil pipes, water pipes, etc. Also perfect for pulling o- rings & gaskets on hydraulic fittings, breaking a seal on a stuck hose, brake hoses/fuel hoses/gas lines/coolant hoses/radiator hoses, lawn mower gas lines and vacuum clamps & hydraulic piston seals, clear out a grease fitting, ect..
Check Stock

NA Black Hydra Krimp 71500 AC Hose Crimper

  • The lightweight hand-held hydraulic press is very portable..
  • Crimping pipes and fittings in an easy and labor-saving way..
  • The kit is applicable for beadlocking fitting and barrier A/C hose..
  • The dies snap quickly into the press fixture requiring no pins or screws..
  • Wide Application: The hydraulic crimper is ideal for shop and field operations, crimping pipes and fittings in an easy and labor-saving way. Customize....
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • ...wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..
Check Stock