Reviews Firmware Configuration

Drone Racing League: 2017 eSports Tryouts

  • 【ExpressLRS 2.4G Protocol】BETAFPV ExpressLRS 2.4G LiteRadio 2 SE radio transmitter is the World's First ELRS radio controller. It comes with build-in ELRS 2.4G TX, which can achieve long-range flying with your drones.
  • 【BETAFPV Configurator】This transmitter supported BETAFPV Configuration with the function of radio controller setup, Full function of the ExpressLRS configuration, Channel mixer for fix wing drones, and firmware update.
  • 【Performance】This ELRS 2.4G protocol radio transmitter built-in 1000mAh 1S battery, you can charge it by type-c cable instead of replacing battery. It has a total of 8 channels. Supports 3 RF powers of 25mW, 50mW and 100mW, and packet rates of 50Hz, 150Hz, 250Hz and 500Hz.
  • 【FPV Simulator】This transmitter has the function of FPV simulator like other versions of LiteRadio 2, which can act as a USB Joystick when connected to a personal computer, suitable for FPV novices to play FPV simulators like EREADRONE.
  • 【About Bind】The stock firmware of the TX module manufactured by our company is ELRS V1.0.0-RC5(the fifth release candidate version) and the Lite receiver and Micro TX Module is V1.1.0.
  • Please note that the firmware version of the Transmitter and the receiver or the TX module should be the same one and the....
Check Stock

BETAFPV ELRS LiteRadio 2 SE Radio Transmitter Remote Controller with Built-in 1000mAh 1S Battery for FPV RC Racing Drones Multirotor Sim Joystick Calibration - Mode 2 Left Throttle

  • 【ExpressLRS 2.4G Protocol】BETAFPV ExpressLRS 2.4G LiteRadio 2 SE radio transmitter is the World's First ELRS radio controller. It comes with build-in ELRS 2.4G TX, which can achieve long-range flying with your drones.
  • 【BETAFPV Configurator】This transmitter supported BETAFPV Configuration with the function of radio controller setup, Full function of the ExpressLRS configuration, Channel mixer for fix wing drones, and firmware update.
  • 【Performance】This ELRS 2.4G protocol radio transmitter built-in 1000mAh 1S battery, you can charge it by type-c cable instead of replacing battery. It has a total of 8 channels. Supports 3 RF powers of 25mW, 50mW and 100mW, and packet rates of 50Hz, 150Hz, 250Hz and 500Hz.
  • 【FPV Simulator】This transmitter has the function of FPV simulator like other versions of LiteRadio 2, which can act as a USB Joystick when connected to a personal computer, suitable for FPV novices to play FPV simulators like EREADRONE.
  • 【About Bind】The stock firmware of the TX module manufactured by our company is ELRS V1.0.0-RC5(the fifth release candidate version) and the Lite receiver and Micro TX Module is V1.1.0.
  • Please note that the firmware version of the Transmitter and the receiver or the TX module should be the same one and the....
Check Stock

PDP Victrix Pro BFG Wireless Controller for PS5

  • ...en PlayStation 5, PlayStation 4, and PC (using X input) devices. Immerse yourself in the highest possible audio quality through the controller’s 3.5mm Headset Jack, compatible with Sony 3D Audio on PS5..
  • Complete Customization - The Left Module can be flipped 180 degrees to play with the standard PlayStation stick configuration as well as offset sticks. Fans of fighting games can swap in the Fight Pad module, to replace the Right Stick with six microswitch buttons..
  • App Update Coming Soon - The Pro BFG is fully customizable and mappable out-of-the-box, please reference the Product Guide below for more information on button mapping and configuration..
  • Firmware Update - A new firmware update is available for your Pro BFG Controller and Dongle to extend battery life to 20 hours of play and improve wireless stability. Download the Victrix Control Hub.
  • Four Mappable Back Buttons & Multi-Position Clutch Triggers - Map the back buttons on the fly with the LED Profile Button, then save and store up to 3 unique profiles on the controller. The patented clutch triggers have 5 different stopping points, allowing players to tune them to their specific liking..
Check Stock

Put Ü First

  • COMPITABLE with PS5 and NEW XBOX SERIES X/S CONSOLES! You can use Xbox One controller to play games on PS5, Xbox Series X/S, PS4, Switch, Xbox one and....
  • Wireless Control (for PS4/Switch/Xbox one): You can play PS4, Switch and Xbox one with Xbox one controller wirelessly..
  • Support Motion Control (for PS4/Switch), Turbo and Remap function: You can set the button configuration by yourself..
  • Audio function: Use your headset on Xbox One controller. (for PS4/Xbox one, Headset compatibility improvement for latest firmware.)..
  • New function after firmware update(V1.4): Wireless use on PC (via Bluetooth, Windows 8 and above suggested, no headset support) / Wired use on Xbox....
Check Stock

TRIGORILLA ANYCUBIC RAMPS 1.4 Control Board Panel Motherboard Shield for Arduino Reprap Prusa Mendel

  • ❀ Fully assembled & tested, no soldering required.
  • ❀ Designed to fit the entire electronics needed for a RepRap in one small package for low cost.
  • ❀ Using a dedicated power supply chip, support 12V-24V power input, the voltage converter chip Ramps solve the heating problem.
  • ❀ Accept 24V input, the same system power can heat the bed current is reduced to 1/4, an effective solution to the hot bed MOS pipe heat problems.
  • ❀ The firmware can use open source firmware Marlin, ramps1.4 identical configuration and can directly replace Ramps1.4.
Check Stock

Zyxel 10 Port 1000/10G-BASE-T Smart Managed Switch Plus 2 Combo SFP+/RJ45, 12 Total Ports [XS1920-12]

  • Upgrades your network to 10GbE connectivity easily and economically.
  • Simplified configuration with user-friendly web-based management GUI.
  • Flexible 10G connection to 10G servers and network storage through both copper and fiber.
  • ZyXEL One Network experience enables simple network management and maintenance.
  • Dual firmware imaging and configuration ensure network availability.
Check Stock

Zyxel 24-Port Gigabit PoE Switch | Smart Managed | Rackmount | 24 PoE+ Ports with 130 Watt Budget [GS1900-24EP]

  • PORT CONFIGURATION - Fast networking performance with 24 Gigabit Ethernet ports.
  • SMART POWER - "Consumption Mode" allocates power efficiently, allowing the PoE budget to power more devices. Smart PoE+ 802.3af/802.3at support with a max of 30W per port (130W total budget).
  • SMART MANAGED - Get up and running in minutes: Web-based setup wizard enables simple and fast configuration and management.
  • LAYER 2 FEATURES - VLAN, QoS, IGMP Snooping, Link Aggregation (LAG), IPv6 and DoS prevention enable better security and management.
  • ENTREPRISE GRADE WARRANTY - Limited Lifetime warranty and free firmware upgrade support.
Check Stock

YJYGR TriGorilla Main Board Motherboard + 5X V2.0 TMC2209 Driver with Mega2560 & RAMPS1.4 Function for 3D Printer Driver Modules Driver Board

  • Simple to install: Integrated with the mighty function of the Mega2560+ramps 1.4 kit, Great reduce the wiring problem, more convenient connection, and more stable..
  • Convenient to use: TriGorilla motherboard support LCD2004 and LCD12864 without using adapter, and there are two choices for main board power supply,you can choose DC power supply connection or directly from the terminal, it is convenient to use..
  • TriGorilla use CP2102 chip as a serial port communication, communication not only stable,but also avoid the repeated to install the driver(There will be increased “COM” port when replacing the traditional 2560 board,so while those people who need to batch purchasing test, the “COM” increases to a certain value will lead to can’t upload the firmware problem.).
  • Excellent compatibility: Firmware can use the same configuration as ramps1.4, the marlin firmware which runs in Mega2560+ramps 1.4 kits can directly running in TriGorilla board..
  • We are a professional Amazon store. If you have any questions, you can contact us at any time. We sincerely create a good buying experience for every customer who comes to each store..
Check Stock

ZyXEL VMG4825 B10A - WIRELESS AC/N VDSL2 COMBO WAN (VDSL+GBE WAN) MODEM GBE GATEWAY AC

  • PORT CONFIGURATION - Fast networking performance with 24 Gigabit Ethernet ports.
  • SMART POWER - "Consumption Mode" allocates power efficiently, allowing the PoE budget to power more devices. Smart PoE+ 802.3af/802.3at support with a max of 30W per port (130W total budget).
  • SMART MANAGED - Get up and running in minutes: Web-based setup wizard enables simple and fast configuration and management.
  • LAYER 2 FEATURES - VLAN, QoS, IGMP Snooping, Link Aggregation (LAG), IPv6 and DoS prevention enable better security and management.
  • ENTREPRISE GRADE WARRANTY - Limited Lifetime warranty and free firmware upgrade support.
Check Stock

CHUNSHENN 3D Printer Mainboard， TriGorilla Main Board Motherboard + 5X V2.0 TMC2209 Driver with Mega2560 & RAMPS1.4 Function for 3D Printer

  • Simple to install: Integrated with the mighty function of the Mega2560+ramps 1.4 kit, Great reduce the wiring problem, more convenient connection, and....
  • Convenient to use: TriGorilla motherboard support LCD2004 and LCD12864 without using adapter, and there are two choices for main board power....
  • TriGorilla use CP2102 chip as a serial port communication, communication not only stable,but also avoid the repeated to install the driver(There will....
  • Excellent compatibility: Firmware can use the same configuration as ramps1.4, the marlin firmware which runs in Mega2560+ramps 1.4 kits can directly....
  • We always attach great importance to our customers. Please feel free to contact us If you find any defects on the product..
Check Stock

Zyxel 8-Port Gigabit PoE Switch | Smart Managed | Desktop/Wallmount and Fanless | 8 PoE+ Ports with 70 Watt Budget | VLAN, IGMP, QoS | Lifetime Warranty [GS1900-8HP]

  • PORT CONFIGURATION - Fast networking performance with 10 Gigabit Ethernet ports.
  • SMART POWER - "Consumption Mode" allocates power efficiently, allowing the PoE budget to power more devices. Smart PoE+ 802.3af/802.3at support with a max of 30W per port (77W total budget).
  • SMART MANAGED - Get up and running in minutes: Web-based setup wizard enables simple and fast configuration and management.
  • LAYER 2 FEATURES - VLAN, QoS, IGMP Snooping, Link Aggregation (LAG), IPv6 and DoS prevention enable better security and management.
  • ENTREPRISE GRADE WARRANTY - Limited Lifetime warranty and free firmware upgrade support.
Check Stock

12V 24V 3D Printer Motherboard Accessories kit MKS Base V1.6+MKS TFT 2 Layer 32 Bit Color Screen Mega2560 Ramps1.4 Compatible for Marlin/Smoothieware/Repetier firmware

  • Combining all the functions on one board solves the cumbersome and troublesome problem of the Ramps1.4 combo interface..
  • The board uses a high quality 2 layer board and is specifically optimized for heat dissipation. The ramps are 2 layer boards..
  • It adopts dedicated power chip and supports 12V-24V power input to solve the heating problem of Ramps voltage conversion chip..
  • The firmware can use the open source firmware Marlin, the configuration is exactly the same as ramps1 4, which can directly replace Ramps1.40..
  • Using the 4982 as a motor drive, it has the same performance as the 4988, but with a SOP package, the heat dissipation is better..
Check Stock

Dell 53D7M Ready Rails For PowerEdge R620

  • ...d your monitor or under your desk with the optional, secure VESA Mount, that offers complete flexibility with the built-in 0.8-meter cable.
  • Optimize Your Workspace: Work without disruptions utilizing a single firmware on our most manageable docks ever. Plus, with Dell Client Command Suite and Microsoft System Center Configuration Manager, you can quickly and easily update your firmware without rebooting your dock.
  • Secure Manageability: Keep your information safe with MAC Address pass-thru and remote port-disablement. Plus, with features like PXE Boot, Wake-on-LAN, and more, it’s easier than ever to stay productive while managing your dock.
Check Stock