Reviews Fire Hose Sign

Fire Exit Sign, Do Not Block Door Signs, Keep Clear at All Times Sign, 10 x 7 Inches Rust Free Aluminum, Weather/Fade Resistant, Easy Mounting, 2 Pack

  • HIGHLY READABLE – The Design of Red on White makes our Fire Exit Sign to attract the attention of People,and is the better way to remind all People that here is Fire Exit ,Do not Block this door all times..
  • HIGH QUALITY ALUMINUM–Our Fire Exit Sign is 10 x 7 Inches rectangle, made of sturdy and strong rust-free aluminum..
  • LONG LIFESPAN - Our Fire Exit Sign can withstand inclement weather without fading. Outdoor service life up to 5 years..
  • EASY INSTALLATION - This Fire Exit Only Do not Block Sign4 pre-drilled holes for easy mounting on any surface including walls, fence，poles and gates.Do Not need for adhesive or special equipment..
  • REFLECTIVE - Our Do Not Block Sign Keep Clear at All Times Sign have Engineer Grade reflectivity that makes sure they can be spotted at night..
Check Stock

NOVINO Fire Hose Nozzle,2 inch NPSH Heavy-Duty Industrial Fire Hose Constant Flow Fog Nozzle with 2pcs 2" Aluminum Camlock Fitting Coupling Fire Equipment

  • Premium Quality Thermoplastic 2 inch NPSH thread fire hose nozzle attached to 2 x 2 inch NPSH threads female / male camlock. The stem of fire nozzle is made by brass and the camlock fittings is made by aluminum to make sure corrosion resistance and durable.
  • Fit for:The 2 inch NPSH fire hose nozzle is only for standard 2"inch NPSH/NPT thread hose ,NOT for NH/NST thread. Female 2" NPSH will only connect to a male 2" NPSH/NPT.
  • Use for: The 2 inch fire hose nozzle works great for fire hose and fire hose racks for lined&unlined fire hose. Spraying large consistent volumes water on fire fighter fireman station for extinguishing fires , also green house applications to put out fires,evaporate cooling,dust suppression,watering for green house,garden,yard,orchard when you need high volume water output.
  • Adjustable spray size: By rotating the industrial constant flow fog nozzle to control on and off and adjust spray size (straight stream and conical fog).
  • Maximum 100 psi water operating pressure,≈60 GPM gallons per minute(about), ≈70 feet distance,NPSH:National Pipe Str....
Check Stock

SpringSpray 1-1/2\ NST/ NH Fire Hose Nozzle Brass Fire Equipment Heavy Duty Industrial Fog Nozzle

  • ✅ EXACT SIZE - 1-1/2" (38 mm) adjustable fog nozzle. Female 1-1/2" NH/NST will only connect to a male 1-1/2" NH/NST. IDM of 1.5" NST/NH nozzle is 1.8585" and conforms to NFPA 1963 Standard for Fire Hose Connections 2014 Edition. If you need 1-1/2" NPSH nozzle, this 1-1/2" NH/NST nozzle will be too big for your hose. Please check the thread of your hose before order.
  • ✅ MULTIPURPOSE APPLICATION - Recommended for fire hose and fire hose racks for lined or unlined fire hose. This fire nozzle is for attaching to a fire hose and for extinguishing fires. This spray nozzle is for fire fighter fireman station, also could be for green house applications, dust suppression, and evaporate cooling.
  • ✅ PREMIUM MATERIAL - Brass housing and brass stem, brass material for resistance to high temperature and impact, and for resistance to corrosion. Excellent watering equipment. 1-1/2" cast brass adjustable fog nozzle.
  • ✅ EASY TO CONTROL - By rotating to control on and off and adjust spray size, adjusts from straight stream to fog for multipurpose use. Industrial constant flow fog nozzle. Approximate gallons per minute (GPM) - 85. Maximum 100 psi pressure (water only). Provides consistent volume at any spray angle. Capable of complete shutoff, straight stream or any d....
Check Stock

SpringSpray 1-1/2\ NST/NH Fire Hose Nozzle Spray Polycarbonate Jet Fog Industrial Fireman 1.5\ Nozzle 75 gpm Fire Equipment

  • ✅ EXACT SIZE - 1-1/2" (38 mm) adjustable fog nozzle. Female 1-1/2" NH/NST will only connect to a male 1-1/2" NH/NST. IDM of 1.5" NST/NH nozzle is 1.8585" and conforms to NFPA 1963 Standard for Fire Hose Connections 2014 Edition. If you need 1-1/2" NPSH nozzle, this 1-1/2" NH/NST nozzle will be too big for your hose. Please check the thread of your hose before order.
  • ✅ MULTIPURPOSE APPLICATION - Recommended for fire hose and fire hose racks for lined or unlined fire hose. This fire nozzle is for attaching to a fire hose and for extinguishing fires. This spray nozzle is for fire fighter fireman station, also could be for green house applications, dust suppression, and evaporate cooling.
  • ✅ PREMIUM MATERIAL - Polycarbonate housing for resistance to high temperature and impact. Brass stem for resistance to corrosion.
  • ✅ EASY TO CONTROL - By rotating to control on and off and adjust spray size, adjusts from straight stream to fog for multipurpose use. Industrial constant flow fog nozzle. Approximate gallons per minute (GPM) - 75. Maximum 100 psi pressure (water only). Provides consistent volume at any spray angle. Capable of complete shutoff, straight stream or any degree of conical fog.
  • 100% SATISFACTION SERVICE - We have a professional fire nozzles de....
Check Stock

SpringSpray 1-1/2\ NST/NH Fire Hose Nozzle Brass Fire Equipment Heavy Duty Industrial Jet Fog Spray Nozzle

  • ✅ EXACT SIZE - 1-1/2" (38 mm) adjustable fog nozzle. Female 1-1/2" NH/NST will only connect to a male 1-1/2" NH/NST. IDM of 1.5" NST/NH nozzle is 1.8585" and conforms to NFPA 1963 Standard for Fire Hose Connections 2014 Edition. If you need 1-1/2" NPSH nozzle, this 1-1/2" NH/NST nozzle will be too big for your hose. Please check the thread of your hose before order.
  • ✅ MULTIPURPOSE APPLICATION - Recommended for fire hose and fire hose racks for lined or unlined fire hose. This fire nozzle is for attaching to a fire hose and for extinguishing fires. This spray nozzle is for fire fighter fireman station, also could be for green house applications, dust suppression, and evaporate cooling.
  • ✅ PREMIUM MATERIAL - Brass housing and brass stem, brass material for resistance to high temperature and impact, and for resistance to corrosion. Excellent watering equipment. 1-1/2" cast brass adjustable fog nozzle.
  • ✅ EASY TO CONTROL - By rotating to control on and off and adjust spray size, adjusts from straight stream to fog for multipurpose use. Industrial constant flow fog nozzle. Approximate gallons per minute (GPM) - 85. Maximum 100 psi pressure (water only). Provides consistent volume at any spray angle. Capable of complete shutoff, straight stream or any d....
Check Stock

Fire Hydrant Adapter, 2-1/2\ NST (NH) Female x 2\ NPT Male Brass Fire Hose Hydrant Adapter with Pin Lug Fire Equipment Fitting Nipple for Fire Hydrants, Hoses, Pipes

  • 【Size】Brass fire hydrant adapters with 2-1/2" National Standard Thread (NST) female on one end for connecting to the hydrant and a 2’’ NPT male on the other end for connecting to a hose. Perfect for attaching to fire hydrant..
  • 【Material】Brass fire hydrant fitting is made of brass for corrosion resistance, ductility at high temperature and low magnetic permeability, they are more heat-resistant than aluminum rigid fire hose and hydrant adapters..
  • 【Easy Operation】Brass fire hose adapter with pin type lugs for quick connect and disconnect, easy to use. These fittings will not rotate as a hose is moved, making them less likely to loosen or break than swivel adapters..
  • 【Application】Brass fire adapter fittings used for connecting fire hose, pvc pipe and other low pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military and civil protection..
  • 【Quality Warranty】We did 100% inspection before these brass fire hydrant adapter leave our factory, if you have any problem with these products after you receive them, please feel free to contact us, we will give you a solution..
Check Stock

Happy Tree 2" NPSH Fire Hose Nozzle Brass Fire Equipment Heavy Duty Industrial Fog Nozzle

  • ...es consistent volume at any spray angle. Constant flow fog nozzle capable of complete shutoff, straight stream or any degree of conical fog. Maximum 100 psi pressure (water only) at ambient temperature (70 degree F). Flow Rate 108 gpm.
  • 【Multipurpose Use】Recommended for fire hose and fire hose racks for lined or unlined fire hose. This fire nozzle is for attaching to a fire hose and for extinguishing fires. This spray nozzle is for fire fighter fireman station, also could be for green house applications, dust suppression, and evaporate cooling.
  • 【Premium Material】Brass stem for resistance to corrosion. Excellent watering equipment. 2" cast brass adjustable fog nozzle.
  • 【Quality Warranty】We did 100% inspection before these brass fire equipment leave our factory. if you have any problem with these products after you receive them, please feel free to contact us, we will give you a solution immediately.
Check Stock

EXCELFU LP Propane Gas Fire Pit Stainless Steel Burner Ring Installation Kit, 12 inch

  • Fire Pit Burner Ring: 12 inch round fire ring with 1/2 inch female gas inlet, rated for up to 150,000 BTUs. Made of durable #304 stainless steel for maximum rust resistance and long lifespan..
  • Stylish Design: New cross-bar design for better gas distribution and made your fire pit enjoyable..
  • Safety&Secure Connection: Fiber reinforced propane hose with solid brass fittings for corrosion resistance, ductility at high temperatures and prodive airtight sealing..
  • Easy Installation: CSA Certified 5 feet connect hose and 5 feet propane hose with type-1 (QCC-1) propane tank connections. Long extension hose meet your needs for fire pit installation..
  • Buy with Confidence: Every propane fire pit kit is backed by 18-month warranty. If you are not satisfied with your purchase, just contact with us and our Customer Service Team will help you..
Check Stock

LEGO City Great Vehicles 60061 Airport Fire Truck

  • Accessories include 2 realistic water elements, breathing apparatus, an angle grinder and an axe.
  • Features Airport Fire Truck and a burning jet engine.
  • Burning jet engine features fire elements.
  • Airport Fire Truck features a rotating, top-mounted water cannon, a reel-out, side-mounted fire hose and opening rear engine hatches.
  • Point the water cannon at the flames and put out the fire! Reel out the fire hose and help douse the flames!.
  • Airport fire truck measures over 3" high, 9" long and 2" wide.
  • Jet engine measures over 1" high, 1" wide and 1" deep.
Check Stock

SpringSpray 1-1/2\ NPSH Aluminum Camlock Fitting Coupling With Heavy-Duty Industrial Fire Hose Nozzle Fire Equipment Constant Flow Fog Nozzle

  • ✅ EXACT SIZE -Thermoplastic 1-1/2 inch nozzle with NPSH threads attached to a 1.5 inch aluminum female camlock. Female 1-1/2" NPSH will only connect to a male 1-1/2” NPSH/NPT. IDM of 1.5" NPSH nozzle is 1.78".
  • ✅ MULTIPURPOSE APPLICATION - Recommended for fire hose and fire hose racks for lined or unlined fire hose. This fire nozzle is for attaching to a fire hose and for extinguishing fires. This spray nozzle is for fire fighter fireman station, also could be for green house applications, dust suppression, and evaporate cooling.
  • ✅ PREMIUM MATERIAL - Polycarbonate housing for resistance to high temperature and impact. Brass stem for resistance to corrosion. Aluminum camlocks for resisting corrosion and tarnishing.
  • ✅ EASY TO CONTROL - By rotating to control on and off and adjust spray size, adjusts from straight stream to fog for multipurpose use. Industrial constant flow fog nozzle. Provides consistent volume at any spray angle. Capable of complete shutoff, straight stream or any degree of conical fog. Aluminum 1-1/2" camlock and nozzle has the option of a shut-off, fog pattern or a straight stream.
  • ✅ 100% SATISFACTION SERVICE - We have a professional fire nozzles development team. If you have any questions about compatibility or any dissatisf....
Check Stock

Hyper Pet Chewz Dog Toys for Large Dogs Dog Ball Dog Bone & Dog Stick Dog Chew Toys [Lightweight Resilient EVA Foam Dog Toy is Safe on Teeth Easy to Clean & Floats on Water for Interactive Play]

  • DOUBLE LAYER CONSTRUCTION: Double layered construction & double stitched for durability the Hyper Pet Fire Hose Flyers are okay to get a little 'ruff'....
  • MADE OF FIRE HOSE MATERIAL: Made from durable, real fire hose material it’s the perfect dog toy for dogs who really get into the game. As with any....
  • FLOATS: The unique Fire Hose Flyers dog toy design floats. This makes it the perfect dog toy to bring to the lake, pool or ocean on those hot summer....
  • DOG SQUEAKY TOYS: The squeakers inside will delight your pet with every squeeze, promoting hours of interactive play as your dog tosses, fetches,....
  • UNIQUE FUN CHARACTERS: The Fire Hose Collection from Hyper Pet comes in multiple sizes, designs, colors and fun characters for your pet to choose....
Check Stock

Hisencn Drop-in Fire Pit Kit 36 x 12 Inch, Fire Pit Insert H Burner with Spark Ignition and Propane Hose Kit for Propane Fire Pit, Fire Table Insert, Indoor or Outdoor Decorative Fireplace

  • 【Dimension＆Material】- 36" x 12" drop-in fire pit pan rectangular, fire pit insert H-shaped burner rated BTU Max : 150,000. ►Made of 304 stainless steelensure its long-lasting use. Withstand high temperature and not easy to bend. Resist corrosion. Fuel distribution ports are precision drilled for smoother gas flow and better flame. ►Safety Package: With EPE pearl cotton in the package to prevent it bend during the transportation..
  • 【Package Upgrade】- Fire pit kit includes 1x Fire pit pan and 1 x fire pit insert H burner. ►Propane hose kit includes 5 feet regulator hose, 4 feet connect hose. ►Fire pit gas burner spark ignition kit includes stainless steel mounting plate, 1/2" shut-off ball valve, 1/2" air mixer valve, 1/4 Chrome Qtr-Turn key valve with 3" key and spark Ignitor (battery not include) with leads & ground wire..
  • 【Thoughtful Design】 - Not whistling noise, all of our flame holes are precession drilled not punched so the gas can flow smoother and create better flame. ►The holes at the bottom will drain water and prevent water from accumulation. ►The iron box collects gas for easy ignition. ►Complete accessories and easy to install into your fire pit..
  • 【Used for Indoor Outdoor Decorative Fireplace】- All of th....
Check Stock

SpringSpray 2\ NPSH Heavy-Duty Industrial Fire Hose Nozzle with 2 x Aluminum 2 inch Camlock Fittings Couplings Fire Equipment Constant Flow Fog Nozzle

  • ✅ EXACT SIZE -Thermoplastic 2 inch nozzle with NPSH threads attached to 2 x 2 inch aluminum female / male camlock with NPSH threads. Female 2" NPSH will only connect to a male 2" NPSH/NPT. IDM of 2" NPSH nozzle is 2.24".
  • ✅ MULTIPURPOSE APPLICATION - Recommended for fire hose and fire hose racks for lined or unlined fire hose. This fire nozzle is for attaching to a fire hose and for extinguishing fires. This spray nozzle is for fire fighter fireman station, also could be for green house applications, dust suppression, and evaporate cooling.
  • ✅ PREMIUM MATERIAL - Polycarbonate housing for resistance to high temperature and impact. Brass stem for resistance to corrosion. Aluminum camlocks for resisting corrosion and tarnishing.
  • ✅ EASY TO CONTROL - By rotating to control on and off and adjust spray size, adjusts from straight stream to fog for multipurpose use. Industrial constant flow fog nozzle. Provides consistent volume at any spray angle. Capable of complete shutoff, straight stream or any degree of conical fog. Maximum 100 psi pressure (water only). Approximate gallons per minute (GPM) - 60. Approximate distance - 70 feet.
  • ✅ 100% SATISFACTION SERVICE - We have a professional fire nozzles development team. If you have any questions about compat....
Check Stock