Reviews Finger Brake Dies

SWAG GOOSENECK DIES, FIT THE 12 & 20 TON FINGER BRAKES ONLY

  • The SWAG gooseneck dies are able to bend up to 1/4" thick material..
  • Gooseneck Dies for bending custom "U" Shaped Brackets..
  • Dies come in individual 1/2" thick segments to be welded in desired finger lengths..
Check Stock

Baileigh 72-Inch Manual Hand Brake (HBR-7222)

  • The SWAG gooseneck dies are able to bend up to 1/4" thick material..
  • Gooseneck Dies for bending custom "U" Shaped Brackets..
  • Dies come in individual 1/2" thick segments to be welded in desired finger lengths..
Check Stock

TEMCo Industrial Universal Automotive Tube Flaring Tool Set Includes Push Connect Double Flare Fuel and Trans Cooler Dies TH1911

  • Dies and adapters to fabricate push connect fittings for 1/4, 5/16 and 3/8".
  • flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
  • Dies and adapters to fabricate GM fuel line flare, brake lines and transmission 5/16 and 3/8".
  • GM transmission cooling line 3/8" and 1/2".
  • Dies and adapters to fabricate metric bubble flare 4.75, 6, 8, and 10mm.
  • Dies have an enlarged compression area to grip the dies better.
  • Flaring tool set includes a Stabilizing Arm for easy tube forming.
Check Stock

VEVOR Brake Line Flaring Tool, 37 & 45 Degree Single, Double, and Bubble Flares for 3/16', 1/4', 5/16' and 3/8' Tube Size, Suitable for Soft Metal of Copper Lines

  • Four Tube Expanding Size: This brake line flaring tool includes 4 dies in the following sizes: 3/16 inch (4.75mm), 1/4 inch (6.35mm), 5/16 inch (8 mm), 3/8 inch (9.5 mm). It creates 37° and 45° single, double, and bubble brake flares in seconds. Reduce the friction on flares to ensure your vehicle operates at optimal performance..
  • Applicable Materials: This double flare brake tool is suitable for expanding copper and aluminum piping. It is an excellent tool for repairs on vehicles or taking lines off of a vehicle. Whether you're working on brake lines, transmission cooler lines, or fuel lines, our flaring tool will help you create the flares you need quickly and easily..
  • Leakproof Connection: With the turret-style design, the professional brake line flaring tool keeps all your dies ready. They are available and within immediate reach with the convenient turret carrier, greatly saving you the hassle of fumbling for small parts or losing them..
  • Vise-Mounted: The brake line flare tool is compatible with a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under a car). The 6.3-inch (16 cm) T-handle screw clamp can hold the die and tube in place firmly without vibration. After repairing, your vehicle will be ....
Check Stock

TGR Professional Brake Line Flaring Tool- 45 and 37 Degree Set Single and Double Flares

  • Quickly create single or double flares on 4 different sizes of tubing. Great for making perfect flares on brake lines, transmission cooler lines and....
  • Includes dies for 3/16”, 1/4”, 5/16”, 3/8” tubing..
  • Easy operation. Creates Single Flares and Double Flares.
  • Kit includes dies for both 45 and 37 degree flares.
Check Stock

ZDS Shimano ST-EF51 3x8 Speed 24 Speed Shifter Brake Lever Combo for Mountain Bike

  • ✔A pair of combination shift / brake levers, compatible with 8-speed cassettes / freewheels and 3-speed cranks.
  • ✔The 2-finger aluminum brake lever can be adjusted to your own needs within reach.
  • ✔Easy to install, compatible with V-brake and cable disc brake(Mechanical disc brake).Aluminum lever and brake cables made of stainless steel with good quality.
Check Stock

4LIFETIMELINES Flaring Tool – Professional Turret Brake Line Flare Tool – 5 Tubing Sizes – Compatible with Stainless Steel Copper Coils

  • 5 TUBING SIZES: The 4LIFETIMELINES heavy duty turret brake line flare tool allows you to create 45 degree highly precise double, single and bubble flares in 5 sizes of tubing, 3/16″, 1/4″, 5/16″, 3/8″ and 4.75mm..
  • COMPATIBLE MATERIALS: This brake flaring tool can work with stainless steel, steel and nickel copper tubing, being a smart and practical solution for brake lines, fuel lines and transmission cooler lines..
  • EASY TO USE: Unlike similar products on the market, this professional flaring tool features a quick-release T handle ensuring fast holder die changeovers for a smooth and user-friendly experience..
  • CONVENIENT TURRET CARRIER: Keep all your dies ready, available and within immediate reach with the convenient turret carrier, which saves you the hassle of groping for small parts or losing them!.
  • PRECISION IS KEY: Keep your brake flares and brake system safe and at optimal length with this highly precise and accurate flaring tool, which requires minimal time, effort and cost!.
Check Stock

BYNIIUR 19 Pcs Watch Press Set, Watch Repair kit with 18mm-50mm Fitting Dies for Watch Back Case Remover Closer, and Battery Replacement

  • Package Included: 12 pieces assorted dies, one watch case holder , one adjustable watch back remover tool, one watch back opening tool knife, tweezers, one piece cleaning cloth,6 finger coats and detailed instructions..
  • High Quality Watch Repair Kit: The watch press is made of cast metal to ensure strength, the arm of the press is spring loaded it keeps the press in the open position.The dies are made of ABS plastic, which will not scratch the watch or mar crystals..
  • Different Size Dies to Fit Your Watch: 12 assorted dies suitable for the watch sizes from 50/48mm 46/44mm 42/40mm 38/36mm 34/33mm 32/31mm 30/28mm 26/24mm 23/21mm 20/18mm..
  • Watch Back Case Remover Tool: Come with adjustable watch back case removal opener, its tempered tips can be adjusted from 13 mm to 56 mm, you just simply placing the blade under the case back and pry it off easily..
  • Come with instruction for easily use: BYNIIUR Watch Press comes with a detailed manual that will guide you how to use these tools. If you are still confused, please feel free to contact BYNIIUR for help, we will offer you resolutions with....
Check Stock

ZTZ MTB MTB Hydraulic Disc Brake Set, Hydraulic Disc Brakes, Left Rear/Right Front, Four-Piston Bicycle Brakes PM/is Adapter Fit for MTB BMX

  • 【Material】 3D Forged 6061 aluminum alloy + 7075 T6 quenched..
  • 【Easy braking】 Mountain bike hydraulic oil brake, dual-piston brake, no matter how fast the speed, how steep the terrain, how wet the environment, gently pull the brake lever to stop immediately..
  • 【Easy to Install】Left Rear, Right Front (installation). Two-way brake. Adjust the brake grip by adjusting the screw to find the right touch. Front and rear brakes are equipped with a conversion seat AB column frame for universal installation is more convenient.Length of front cable: 800mm，Rear cable:1400mm.
  • 【Four Piston】The dual-brake four-piston directly transmits the oil pressure to the brake block to improve the braking efficiency，15% higher braking efficiency than ordinary hydraulic brakes.
  • 【Three-finger brake lever】 The three-finger brake lever is designed according to the human body. The brake is easy to operate, the front and rear, left and right are in line with the usage habits, and the long enough oil pipe can adapt to almost all models..
Check Stock

MEROCA M4 Four-Piston Oil Brake Oil Disc Road Bike Mountain Bike Hydraulic Disc Brake 1 Pair(Left Front Right Back)

  • 1.EASY BRAKING:Bicycle Hydraulic Disc Brake,Three-Dimensional oil Cylinder, Easy To Deal With Steep Slopes, off-Road, And Forest Roads. In The Most Complex Road Conditions, You Can Brake With A Single Pinch..
  • 2.DURABLE:High-Strength Aluminum Alloy Brakes, The Calipers Are Not Easy To Be Damaged, and More Wear-Resistant. The Resin Pads Have Good Heat Dissipation and Braking Effects. Reduce Maintenance Times, Lightweight Design, and More Secure And Safe Riding..
  • 3.FOUR-PISTON DOUBLE-BRAKE:The oil Plug Directly Transmits The oil Pressure To The Brake Block To Keep The Brake Stable And Make The Brake Transmission More Efficient. Flexible Control, Convenient Braking, Non-Slip And Not Let Go..
  • 4.EASY TO INSTALL:It It Is Basically Suitable For The Installation of Models on The Market. Left and Right Front and Rear (Installation), Two-Way Braking. Adjust The Brake Lever By Adjusting The Screw To Find The Correct Touch..
  • 5.THREE-FINGER BRAKE HANDLE:but The Three-Finger Brake Handle is Designed According To The Human Body. The Brake Is Easy To Operate, And It Conforms To The Usage Habits. If You Have Any other Questions, You Can Contact Us, And We Will Help You Within 24 Hours..
Check Stock

MEROCA Oil Brake Bicycle Brake Hydraulic Disc Brake Bilateral Brake Mountain Bike Universal Brake Oil Disc 1 Pair（Left Front Right Back）

  • 1.【Easy Braking】 Bicycle Hydraulic Disc Brake, Three-Dimensional oil Cylinder, Easy To Deal With Steep Slopes, off-Road, And Forest Roads. In The Most Complex Road Conditions, You Can Brake With A Single Pinch..
  • 2.【Durable】High-Strength Aluminum Alloy Brakes, The Calipers Are Not Easy To Be Damaged, and More Wear-Resistant. The Resin Pads Have Good Heat Dissipation and Braking Effects. Reduce Maintenance Times, Lightweight Design, and More Secure And Safe Riding..
  • 3.【Four-Piston Double-Brake】 The oil Plug Directly Transmits The oil Pressure To The Brake Block To Keep The Brake Stable And Make The Brake Transmission More Efficient. Flexible Control, Convenient Braking, Non-Slip And Not Let Go..
  • 4.【Easy To Install】It It Is Basically Suitable For The Installation of Models on The Market. Left and Right Front and Rear (Installation), Two-Way Braking. Adjust The Brake Lever By Adjusting The Screw To Find The Correct Touch..
  • 5.【Three-Finger Brake Handle】 but The Three-Finger Brake Handle is Designed According To The Human Body. The Brake Is Easy To Operate, And It Conforms To The Usage Habits. If You Have Any other Questions, You Can Contact Us, And We Will Help You Within 24 Hours..
Check Stock

MEROCA M4 Four-Piston Oil Brake Oil Disc Road Bike Mountain Bike Hydraulic Disc Brake 1 Pair(Left Back Right Front)

  • 1.EASY BRAKING:Bicycle Hydraulic Disc Brake,Three-Dimensional oil Cylinder, Easy To Deal With Steep Slopes, off-Road, And Forest Roads. In The Most Complex Road Conditions, You Can Brake With A Single Pinch..
  • 2.DURABLE:High-Strength Aluminum Alloy Brakes, The Calipers Are Not Easy To Be Damaged, and More Wear-Resistant. The Resin Pads Have Good Heat Dissipation and Braking Effects. Reduce Maintenance Times, Lightweight Design, and More Secure And Safe Riding..
  • 3.FOUR-PISTON DOUBLE-BRAKE:The oil Plug Directly Transmits The oil Pressure To The Brake Block To Keep The Brake Stable And Make The Brake Transmission More Efficient. Flexible Control, Convenient Braking, Non-Slip And Not Let Go..
  • 4.EASY TO INSTALL:It It Is Basically Suitable For The Installation of Models on The Market. Left and Right Front and Rear (Installation), Two-Way Braking. Adjust The Brake Lever By Adjusting The Screw To Find The Correct Touch..
  • 5.THREE-FINGER BRAKE HANDLE:but The Three-Finger Brake Handle is Designed According To The Human Body. The Brake Is Easy To Operate, And It Conforms To The Usage Habits. If You Have Any other Questions, You Can Contact Us, And We Will Help You Within 24 Hours..
Check Stock

ABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube

  • [Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
  • [Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
  • [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
  • 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
  • [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
  • Each die block is 1.7 inches (4.3 cm) long.
  • Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
  • [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1....
Check Stock