Reviews Filter Removal Tool

TOYOTA Genuine OEM 00279-0WQTE-01 Oil (4 QUARTS)

  • STRONG AND DURABLE: This oil filter wrench is made of high-quality aluminum alloy, ensuring strength and durability. The surface of the oil filter cap removal tool is treated with a high quality black anodized finish, anti-rust and anti-corrosion to prolong the service life of the tool..
  • APPLICATION: Install the 64mm 14 flute cup style oil filter wrench on the filter cover, it can clamp and provide maximum torque with multiple contact points to rotate the extremely tight oil filter cover, and cooperate with a 27mm socket or 3/8” (10mm)drive ratchet wrench to loosen it..
  • APPLICABLE MODELS: Oil filter cover removal tool is suitable for most car models, such as Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and More vehicles equipped with 2.5L to 5.7L engine that that use Toyota's cartridge style oil filter system. But the filter wrench does not fit the car with disposable conventional spin-on filters and 1.8L engine oil filter cap..
  • DESIGN: The bottom edge of the oil filter wrench has 4 slots for a perfect match with the vehicles using 15620-31060, 15620-36010, 15620-36020 oil filter housing covers. The tooth-like s....
Check Stock

2Pcs Universal 12 Inch Oil Filter Pliers 2-1/2 to 4-1/2 Inch and Adjustable 3 Jaw Oil Filter Wrench 2-1/8 to 4-1/2 Oil Filter Change Removal Tool Set

  • Package Include - The oil filter wrench set includes a 12 inch long handle grip pliers, and an adjustable 3 jaw 2 way oil filter wrench removal tool for install oil filters and remove..
  • Oil Filter Plier - The long handles plier has a 12 inch long handle, the max jaw open is about 2-1/2 to 4-1/2 inch(63.5 to 115mm), with right angle teeth for grip and a 3-position slip joint design for quickly adjusts to size. Good for almost all of your family vehicles..
  • 3-Jaw 2-Way Oil Filter Wrench - This adjustable oil filter removal tool manufactured from durable carbon steel and is made specifically to be used to remove oil filters ranging from 2-1/8 inch to 4-1/2 inch (54-116mm).
  • The wrench Set are made of hardened steel, high hardness and strength. After drop forged, heat treated steel with rust-resistant finish, durable enough for long time service..
  • Universal Tool - This oil filter wrench remover tool set would help you do the job easily. Recommended for most common size car and stuck engine oil filters. As long as the filter is not too small, it will remove most filters..
Check Stock

Motivx Tools Oil Filter Removal Tool - Adjustable Wrench for 2.5" - 3.25" Small Diameter Spin-On Oil Filters

  • ...X2330 oil filter wrench removes small 2.5” - 3.25” diameter traditional spin-on or canister style oil filters. The wrench features a tooth style design for a secure grip that won't slip and lets you easily and safely remove the filter..
  • HEAVY DUTY CONSTRUCTION – This removal tool features a .050” captured spring as opposed to the flimsy .020” spring found on other wrenches. The jaws are built tough using nickel plated 4130 chromoly steel and attached to the 3/8” thick solid steel top plate. Low profile design gives you access to tight access spots..
  • EASY TO USE – Simply slide the jaws of the wrench over the filter while slightly rotating to the right (tighten). Once the wrench is seated in place on the filter, use a ratchet and 3/8" extension to begin ratcheting the wrench counter-clockwise (loosen). The jaws will grip the stuck filter tightly and begin loosening it..
  • PROFESSIONAL QUALITY - Motivx Tools is a specialty tool company located in the United States and we take great pride in our products. These oil filter wrenches are backed by a limited lifetime warranty and excellent customer service..
Check Stock

THIKPO 3/8 inch 64mm 14 Flute Oil Filter Wrench for 2.5-5.7L Engines with Toyota's Cartridge Style Oil Filter System, Oil Filter Cap Removal Socket Tool for Toyota, Lexus, Scion

  • This 3/8" 64mm 14 flute Toyota oil filter cap removal tool is made of premimum 6065 aluminum alloy, which make it tough enough to provide great power to rotate and replace the extremely tight original oil filter cap..
  • Surface of the oil filter wrench is treated with a high quality black anodized finish to prevent corrosion. It greatly increases friction and durability of the tool, and will highly extend the serves life..
  • This THIKPO oil filter wrench is used for vehicles that use 15620-31060, 15620-36010, 15620-36020 oil filter housing cap and 04152-YZZA1, 04152-YZZA4, and 04152-YZZA5 Toyota oil filter system, including the new 2GRFKS 3.5L Tacoma and 8AR-FTS 2.0L in the NX200t and RC200t..
  • The oil filter cap removal tool perfect fit most of vehicles equipped with 2.5L to 5.7L engines, such as Toyota, Lexus , Scion RAV4, Camry, Tundra, Highlander, Sienna, 4Runner, Avalon, Tacoma, IS250, RX350and others which use Toyota's cartridge style oil filter system..
  • WARRANTY from THIKPO - This is NOT a genuine part, it's a aftermarket replacement part. Please feel free to contact us if you have any questions about our products or serves, we will try the best to help you..
Check Stock

Portafilter Basket Removal Tool Stainless Steel Coffee Portafilter Remover Espresso Cleaning Accessories

  • High Quality coffee portafilter basket removal tool made of hardened stainless steel with pry edge for easy filter basket removal from portafilter.
  • Easy to use simply insert and twist to easily remove baskets in no time at all. The size of the portafilter remover tool’s tip is 0.7 cm and the rest of the tool is 8cm long..
  • No more problems to get the baskets out of your portafilters. The high quality Portafilter removal tool Makes removing portafilter baskets quick, easy & safe.
  • End hole for attaching a keyring or a clip. Portafilter Basket removal is Significantly safer than using improvised objects such as knives or screwdrivers which can slip.
  • Our product pictures are real and shot by professionals. However, due to differences in computer/mobile displays, there can be variations of color between the actual product and your screen.
Check Stock

OEMTOOLS 25323 10” Master Oil Filter Locking Pliers, Universal Fit, Locking Grip, Heavy Duty Adjustable Wrench for Easy Oil Filter Removal

  • Adjustable Oil Filter Removal Tool: Jaw capacity to fit spin-on filters between 2 1/8 Inches to 4 1/2 inches or 55-120 millimeters.
  • Intelligently Designed: The design of locking pliers secures its grip on the oil filter, so you can focus entirely on applying pressure and torque to remove the filter.
  • Secure Grip: The machined jaw teeth of the locking pliers provide a sure grip and easy removal without damaging filters.
  • Unlock mechanism makes it easy to disengage.
  • Precise Application: Adjust and lock in the grip of the pliers to remove any margin for error during the oil filter removal process.
  • Built to Last: This heavy-duty oil filter adjustable wrench is made of high-quality steel.
Check Stock

NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case

  • ... work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
  • Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum opening approx: 9.3CM/3.66IN.NexADD fuel line clip removal tool suitable for use in large space.Fuel line hose clamp pliers designed to compress the quick disconnect lugs without damaging connector.Suitable for VW, Audi, Fiat, GM,Vauxhall,Mercedes and other makes and models..
  • 9" Length Fuel Filter Calipers ★- Releasing connections on fuel pipes or replacing fuel filters.Bent jaws designed for removal and replacement of connections on fuel pipes.Spring loaded action for easy one-handed operation.Drop forged high carbon steel for durability,additional black oxide finishing improves corrosion resistance of surface.NexADD 9" length fuel filter calipers have more uses than l....
Check Stock

A.A Fuel Filter Install Removal Tool Wrench for Mercury Verado/Optimax 91-896661

  • Fuel Filter Installation/Removal Tool For Mercury Optimax and Verado Engines..
  • The tool works with filter part # 35-8M0020349, 35-8M0060041..
Check Stock

12 Pieces Faucet Aerator, 4 Sizes Faucet Replacement Part Insert Aerator, 4 pcs Faucet Cache Aerator Removal Tool Key Wrench, Male 16.5 18.5 21.5 24mm Tap Aerators, Flow Restrictor

  • 【12 Pcs of 4-Sized Faucet Aerator Insert Parts】This Cache Aerators Replacements includes 12 pieces faucet filter cache aerator, covering 4 sizes recessed aerator key for Male 16.5mm/ 18.5mm/21.5mm/24mm Faucet Thread Size..
  • 【4 Pcs Faucet Aerator Removal Keys】Great aerator removal tool for faucet aerator replacement. Fit for Male 16.5mm/ 18.5mm/21.5mm/24mm insert aerator..
  • 【High Quality ABS Material】Cache faucet aerator keys with aerator removal tool are made of durable ABS, strong and sturdy. Reliable material with good workmanship ensures it can last for a long time use..
  • 【Easy to Install】Sink aerator set with water keys comes with wrench tools allow you to complete removal and installation in minutes. No need to have a plumber. Faucet aerator removal tool is easy for your daily use..
  • 【Faucet Aerator Wrench】12 Pcs aerator replacement parts and 4 pcs removal tool can be fitted to kitchen sink faucets, bathroom taps and lavatory faucets spout head, compatible with Neoperl, Moen, Kohler, American Standard, Danze, and Groche Cache Faucet Aerators..
Check Stock

EWK 36mm Oil Filter Wrench Socket for Cartridge Type Oil Filter on Ford, VW, Audi, BMW, Mini, Porsche

  • 【 Easy Removal 】 EWK 36mm oil filter removal tool features 6-point hex to prevent rounding-off the filter canister. The 6 flat sides allow the oil filter wrench to grip the filter cartridge tightly and prevents binding..
  • 【 Perfect Fit 】 Compatible with Ford F250 6.0, F250 6.4, various BMW, Mercedes, Mini, VW, Audi, Volvo, Porsche and some Duramax engine vehicles with a 36mm oil filter cap..
  • 【 Low Profile Design 】 The oil filter socket is slim and thin which allows easier access to confined spaces. And the special 6-points hex wall holds securely on the oil filter without slippage..
  • 【 Heavy Duty 】 The durable 36mm oil filter wrench is constructed of quality CR-V Steel with manganese phosphate coating to resist rust and corrosion..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

OEM 25320 2-1/2-Inch to 4-5/8-Inch Oil Filter Pliers/Wrench

  • ADJUSTABLE OIL FILTER REMOVAL TOOL: These adjustable wrench pliers have the jaw capacity to fit spin-on filters from 2-1/2 inches to 4-5/8 inches.
  • Oil filter tool boasts a 20-degree jaw bend for more applications.
  • INTELLIGENTLY DESIGNED: Our filter wrench pliers feature a slip joint handle design that quickly adjusts to various sizes.
  • Oil filter wrench pliers accommodate the most common sizes among car and small engine filters.
  • SECURE GRIP: These engine oil filter wrench pliers come with machined jaw teeth that provide a sure grip without damaging filters.
  • Steel jaws on these oil filter wrenches make it quick and easy to remove even the toughest oil filters.
  • WORK IN TIGHT SPACES: Our automotive oil filter pliers include cushioned handles for safety and comfort.
  • Oil filter remover handles are nonslip, making it the best oil filter wrench pliers for working in tight spaces.
  • BUILT TO LAST: These heavy-duty oil filter adjustable wrench pliers are made of high-quality steel that is designed to last a lifetime.
  • Oil filter puller is designed with professional auto mechanics and heavy-duty applications in mind.
Check Stock

Motivx Tools Oil Filter Drain Tool Compatible with Toyota, Lexus and Scion Vehicles with Cartridge Style Oil Filter Systems

  • Cleaner Oil Changes - This tool fits Toyota 2.0L to 5.7L engines that use the cartridge style oil filter system. It makes the oil change process much cleaner by draining the filter housing prior to removal preventing oil spills..
  • Avoid The Mess - Simply screw the tool into the drain valve on the oil filter housing, then tighten the knurled nut to drain the housing. Once the housing is drained it can be removed to replace the filter without the usual mess..
  • High Quality Construction - This drain tool will provide years of service thanks to it's heavy duty construction. The 3 piece all metal body connects to a 30” long silicone drain hose that allows you to direct the oil into your oil disposal container..
Check Stock

Universal Oil Filter Wrench Adjustable 3 Jaw Oil Filter Removal Tool Range 2-3/8 to 3-7/8 inch with 1/2'' Adapter 3/8'' Square Drive Socket

  • Universal Tool - This oil filter removal tool fits oil filters ranging from 60mm to 98mm (Oil filters Range 2-3/8 inch to 3-7/8 inch). A removable 3/8-inch reducer is available for larger clearance and can be used with a 3/8-inch square drive tool..
  • 3 Jaw Design - Eastyard "claw" type oil filter wrench, ensures, with it's 3 Jaw grip, a more firm hold on the oil filter. Claws fits tighter as more torque is applied..
  • High Performance Material - 3 jaws adjustable oil filter wrench are crafted with top grade steel structure, which provides the advantage of durability and wear resistance. Finished with black-oxide coating to resist rust & corrosion..
  • Compact Design - This car filter oil change tools provides a low clearance, helping users dislodge filters even in tight spaces..
  • Bonus Gift - The oil filter wrench set includes 1/2”-3/8” drive adapter that can fit 1/2 and 3/8 inch square driver ratchet which can meet different demand..
Check Stock