14k Yellow Gold Filled Cable Pendant Chain Necklace (1.3 mm, 18 inch)
- ELEGANT, DURABLE, AFFORDABLE. A high quality gold jewelry alternative that showcases a cable chain necklace style and captures the brilliant shine of genuine yellow gold for a modest value.
- AN EVERYDAY GOLD JEWELRY. This gold filled cable chain necklace is perfect for everyday wear as it will complement and add elegance to casual and formal attires and it will look great by itself or with a gold pendant, and it will also match other gold jewelry such as earrings and bracelets or layer it with minimalist or statement necklaces and chains.
- This gold filled pendant chain necklace is available in widths of 1, 1.3, 1.5 or 2.1 millimeter and it is offered in various lengths.
- the 1 and 1.3 millimeter chains are secured with a spring ring clasp while the 1.5 and 2.1 millimeter chains are completed with a sturdy lobster claw clasp.
- GIFT GIVING READY. An elegant black packaging house this beautiful gold fashion jewelry for women ready to be given as gift for Valentine's Day, birthday, anniversary, Mother's Day, graduation, holidays or other special occasions.
Check StockCable Matters 100-Pack 8mm Strain Relief Boots for Large Diameter Cable in Black
- Strain relief booTS for large diameter cable supports 23-24 UTP Cat 6, 6A, or outdoor cable with an outside diameter up to 7.5mm.
- Difficult to find RJ45 strain relief boots pair with RJ45 cable termination plugs for larger cables.
- Cat 6 cable compatible strain relief boots are used for terminating bulky 23 AWG Cat 6 or Cat 5e unShielded network cable with a large outside diameter.
- Snagless design protects the RJ45 clip on modular connectors from damage.
- Slips over the clip to protect the modular connector when routing the cable.
- Sturdy cable boots in a Cost effective 100-pack support the weight of a heavier cable such as a Cat 6A cable with a thick spine or a gel-filled outdoor rated able.
- compatible with the Cable Matters Cat 6 RJ45 Modular Plugs for Large Diameter cables (Model 180064).
Check StockDwyer DigiMag Series DM-1000 Differential Digital Pressure Gauge Range 0-5 WC
- Air and non-combustible, compatible gases..
- Removable terminal block for 16 to 26 AWG..
- Cable gland for 0.114 to 0.250" (2.9 to 6.4 mm) diameter cable..
Check StockDwyer DigiMag Series DM-1000 Differential Digital Pressure Gauge, Range 0-10\WC
- Air and non-combustible, compatible gases..
- Removable terminal block for 16 to 26 AWG..
- Cable gland for 0.114 to 0.250" (2.9 to 6.4 mm) diameter cable..
Check StockDwyer DigiMag Series DM-1000 Differential Digital Pressure Gauge, Range 0-25\WC
- Air and non-combustible, compatible gases..
- Removable terminal block for 16 to 26 AWG..
- Cable gland for 0.114 to 0.250" (2.9 to 6.4 mm) diameter cable..
Check StockDoor Pressure Gauge Push-Pull, 0-35 Lbs with Plastic Protective Tube
- Air and non-combustible, compatible gases..
- Removable terminal block for 16 to 26 AWG..
- Cable gland for 0.114 to 0.250" (2.9 to 6.4 mm) diameter cable..
Check StockDwyer DigiMag Series DM-1000 Differential Digital Pressure Gauge, Range 0-0.25\WC
- Air and non-combustible, compatible gases..
- Removable terminal block for 16 to 26 AWG..
- Cable gland for 0.114 to 0.250" (2.9 to 6.4 mm) diameter cable..
Check StockMagnetic Charging Cable Coil Charging Cable Magnetic USB Charging Cable Magnetic Fast Charging Cable Black-3.3FT
- 【Fast Charging Magnetic Cable】 This unique magnetic data cable is a cord that's filled with little magnets that keep it super organized and tidy..
- 【Soft and Durable】 They're reinforced with our flexible, protective silicone tubing and made with premium, high-grade materials. Cables are also....
- 【Charging and Data-Transmission】 Whether you’re charging your phone or transferring data, this magnetic phone charger cable provides faster,....
- 【Magnetic Phone Charger Cord】 Magnetic phone cord is made of high-quality magnetic accessories, reinforced by our soft protective silicone tube,....
- 【Neat and Beautiful】 Easily coil your cable for a neat and tidy charge or data transfer session. And it might be the most beauty charging cable....
Check StockCat6 UTP 1000FT Ethernet Cable Outdoor Direct Burial Gel Flood 23AWG Bare Copper
- High speed Cat6 Outdoor Ethernet cable UV resistant/Direct burial Gel filled 23AWG Solid Bare Copper.
- PE UV protected jacket prevents damage due to sunlight exposure.
- Gel-filled jacket provides moisture protection when used in direct burial environment.
- EIA/TIA 568 compliant Category 6 rated to 100Mhz for high performance Ethernet networks.
- 1,000 feet (305 meters) Black Jacket / Wooden Reel.
Check StockHEATIT HISD 18-feet Pipe Heating Cable with Built-in Thermostat
- Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues..
- Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
- Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
- Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When t....
Check StockHEATIT HISD 15-feet Pipe Heating Cable with Built-in Thermostat
- Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues..
- Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
- Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
- Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When t....
Check StockDEWENWILS Roof Heat Cable, 18ft Heat Tape for Pipe, Gutter, Roof, Self-Regulating Cable Pre-Assembled, UL Listed
- Designed for water filled plastic (including PEX) and metal supply pipes only. Do not use on drain lines, fuel lines, hoses, empty water pipes, steam lines or gutters. Three year limited warranty. If you have any question about the product, please contact us and we will try our best to help you..
- Quick and easy to install. Minimum pipe length is 3 feet. Cable will be applied straight along the pipe, and will protect pipe from 3/8" to 1 1/2" in diameter..
- Save energy. 120 Volt, 7 watts/ft. 2 ft 18/3 cold lead with plug.The build-in thermostat automatically turns the heating cable on below 42.8° F (6° C) and off above 55.4° F (13 ° C)..
- UL approved. Durable polyurethane as inner insulation and weather resistant PVC (high-low temperature) for outer protective jacket. Never allow heating cable to touch, acorss , spiral or overlap itself at any point..
- Testing the cable before installation. Uncoil the cable, plug in the cable. Wrap a bag of ice around the thermostat. The thermostat will turn the cable on when the temperature below 42.8° F. Wait about 20 minutes. The cable should now feel warm to touch. Then turn it off..
Check StockHEATIT HISD 12-feet Pipe Heating with Built-in Thermostat, Black
- Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues..
- Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
- Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
- Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable in....
Check Stock