Reviews Filament Coiling Machine

Snapmaker PETG 3D Printer Filament 1.75mm, 1kg Spool (2.2 lbs) - Dimensional Accuracy +/- 0.03mm, Fit Most FDM Printer (Blue)

  • Filament Dryer and Remove Moisture: Comgrow Dry Box is designed to keep filament dry and remove moisture from kinds of filaments. Internal heating during printing provides a dry storage environment for 3D printer filaments, keeps the filament dry. Avoid entanglement, clogging, poor adhesion and layer migration caused by the dampness of the printing wire.(Note: Only used for the drying of 3D printer Filament).
  • Real-time monitoring of temperature and humidity: Adjustable temperature range 40°~ 50 °C, setting time from 6 hours to 12 hours.2-inch LCD screen and touch buttons make it easy to operate, it is more comprehensive and clear of the information display.Press the power button to start, hold the function button(M) to change the dry time and the temperature setting..
  • Large storage volume: Comgrow dryer box can store 2 rolls of filaments with a width of less than 70mm at the same time or 1 roll of filaments with a width of less than 150mm.Works perfectly with all standard filament diameters 1.75mm/2.85mm..
  • Great sealed filament box: The outlet structure adopts a silicone cable sheath and Teflon tube, the outlet is smooth and can be covered with a plug when not in use.The upper cover has a snap button structure, and the sealing performance is good..
Check Stock

AMOLEN 3D Printer Filament, PETG Filament 1.75mm PETG Multicolor Rainbow, 3D Printing Filament 1KG/2.2lb

  • 【3D FILAMENT DRYER AND STORAGE】Dry Box is designed to keep filament dry and dehumidify various kind of filaments, Heating during the printing Provide a dry storage environment for 3D printer filament..
  • 【24 HOURS KEEP FILAMENT DRY】The large-area heating block can ensure that the contact area between the filament and the filament is continuously rotated in the dry hot box to remove water. The best bearing, thereby reducing all resistance on the filament of the 3D printer.
  • 【EASY TO USE】The filament drying oven has a 2-inch LCD screen and only two buttons (set temperature and time), the default oven drying time is 6 hours, short press the left button to reduce the drying time. Temperature, short press the right button to increase the temperature..
  • 【MAXIMUM CAPACITY】Support the maximum capacity: Φ210*85(H)mm, and the diameter of consumables line: 1.75mm/2.85mm/3.00mm.The Dry Box is compatible with 99% of 3D printing filaments and 3d printer..
  • 【AVOID INTERRUPTION】 Drying box has a quiet sound even when running, and can be used with various FDM printers. We provide a 6-month warranty for the whole machine, if you have any questions about the operation of the product, please feel free to contact us..
Check Stock

AMOLEN PLA 3D Printer Filament, PLA Filament 1.75mm Silk Shiny Filament Red Gold Filament, 3D Printing Filament 1KG/2.2lb

  • PLA SILK SHINY FILAMENT- Good pla silk filament combine silk gold and shiny red, stunning color, print finished will give you an amazing printing object..
  • STRONG COMPATIBILITY-Perfectly compatible with 99% FDM 3D Printer & 3D Pen.Comgrow Creality Ender,ANYCUBIC,Creality 3D,SUNLU,ERYONE,MYNT3D,3Doodler,1.75mm pla filament consistent diameter,dimensional accuracy +/-0.03mm.
  • PREMIUM QUALITY- High quality silk pla filament with high purity and without no bubbles,no jamming,no warping,melt well, feed smoothly, outstanding printing appearance.
  • VACUUM & REUSABLE BAG- Vacuum packaging with desiccant to keep it dry and keep out dust, a reusable bag with sealing strip, pla filament can be put back into bag after used.100% no tangle,machine auto wind,fixed hole steady.a perfect storage condition..
  • HASSLE FREE - AMOLEN is focus on innovative and better quality PLA filament.Defective filament can be reissued or refunded fully.We provide professional 3D printing technical guidance and good 24/7 customer service.
Check Stock

JGAURORA Upgraded A5S 3D Printer Pre-Assembled with Metal Frame Large Build Size Heated Bed 305x305x320mm Desktop 3D Printers Filament Sensor (A5S)

  • JGAURORA A5S 3d printer is an updated version of A5, printer size: 305*305*320mm (12*12*12.6in), content 250g PLA filament.
  • Updated:1.Change the connection method use SD card.
  • 2.Mainboard: A5S is self-developed mainboard, high precision and good heat dissipation.
  • 3.A5S adds automatic memory, intelligent warning function.
  • 4.A5S using certified power, cost is three times higher than normal, add one more protection.
  • Filament Run Out Detection:the machine beeps when filament runs out to remind you to change new filament quickly, if filament run out for 1 hour, will stop heating nozzle, resume after filament re-load.
  • BDG Heated Platform: Allows you remove prints flexible and keep cleaner,won't need masking tape and glue stickers..
  • Fast Assembly: come with three modular, the frame, Y-axis box and the filament rack, less than 30 min to complete the assembling..
Check Stock

AMOLEN PLA 3D Printer Filament,PLA Filament 1.75mm Shiny Filament Color Change Purple Blue,3D Printing Filament 1KG/2.2lb

  • 【Color Change PLA Shiny Filament】---The PLA shiny purple blue change at different angles, presenting an amazing color, which is very suitable for printing beautiful objects for display or as gifts.
  • 【Strong Compatibility】---Perfectly compatible with 99% FDM 3D Printer & 3D Pen.Comgrow Creality Ender,ANYCUBIC,Creality 3D,SUNLU,ERYONE,MYNT3D,3Doodler,1.75mm pla filament consistent diameter,dimensional accuracy +/-0.03mm.
  • 【Premium Quality】---High quality pla filament with high purity and without no bubbles,no jamming,no warping,melt well, feed smoothly, outstanding printing appearance.
  • 【Vacuum & Reusable Bag】---Vacuum packaging with desiccant to keep it dry and keep out dust, a reusable bag with sealing strip, pla filament can be put back into bag after used.100% no tangle,machine auto wind,fixed hole steady.a perfect storage condition..
  • 【Hassle Free】---AMOLEN is focus on innovative and better quality PLA filament.Defective filament can be reissued or refunded fully.We provide professional 3D printing technical guidance and good 24/7 customer service.
Check Stock

Zeberoxyz 3D Printer Filament Holder Rotate Spool with Base Filament Mount Rack Bracket Used for TPU/PLA/ABS/Nylon/Wood 3D Printing Material--Not Included Filament (Rotate Spool with Base)

  • 【3D FILAMENT DRYER AND STORAGE】Dry Box is designed to keep filament dry and dehumidify various kind of filaments, Heating during the printing Provide a dry storage environment for 3D printer filament..
  • 【24 HOURS KEEP FILAMENT DRY】The large-area heating block can ensure that the contact area between the filament and the filament is continuously rotated in the dry hot box to remove water. The best bearing, thereby reducing all resistance on the filament of the 3D printer.
  • 【EASY TO USE】The filament drying oven has a 2-inch LCD screen and only two buttons (set temperature and time), the default oven drying time is 6 hours, short press the left button to reduce the drying time. Temperature, short press the right button to increase the temperature..
  • 【MAXIMUM CAPACITY】Support the maximum capacity: Φ210*85(H)mm, and the diameter of consumables line: 1.75mm/2.85mm/3.00mm.The Dry Box is compatible with 99% of 3D printing filaments and 3d printer..
  • 【AVOID INTERRUPTION】 Drying box has a quiet sound even when running, and can be used with various FDM printers. We provide a 6-month warranty for the whole machine, if you have any questions about the operation of the product, please feel free to contact us..
Check Stock

Artistic Wire, Coiling Gizmo, Econo Winder

  • SIZE: 2 rods, 3.0 mm / 0.12 in and 2.0 mm / 0.08 in.
  • INCLUDES: The Coiling Gizmo Econo Winder comes with a manually mounted base with screw, two different sized rods, and instructions..
  • USE: Crank wire around the rod to make various coiled springs and beads. This Coiling Gizmo is suitable for use with all gauges of Artistic Wire to make beaded jewelry and other designs..
Check Stock

Jewellers Tools Gizmo Coiling Jig Craft Beading Wire Wrapping Bead New

  • The pack contains 4 cranking rods 2, 2.5, 3.25 and 4mm, and the bracket frame. You can use the coiling gizmo with all guages of craft wire to make beaded jewellery and other designs..
  • Most other coiling jogs have 2 rods compare before you buy..
Check Stock

JAYO TPU 3D Printer Filament, 1.75mm Flexible TPU 3D Printing Filament Material fit for FDM 3D Printers, Dimensional Accuracy +/- 0.02mm Soft Consumables, TPU Black

  • 【Soft Filament】JAYO TPU FDM 3D Filament has a shore hardness of 95A, higher softness and tension. It is suitable for printing children's toys, shoes, medical supplies and other product models with good stretchability. JAYO filaments have a wide range of uses and gives you more printing choices..
  • 【 Flexible Filament】 TPU Flexible filament is able to withstand much higher compressive. With 600% Fracture Growth Rate, it can be used to print some strong and stable projects. No worry about fracture.
  • 【Dimensional Accuracy & Less-Tangle】JAYO 1.75mm TPU filament is advanced precisely diameter measuring in the manufacturing process. The dimensional accuracy is +/- 0.03mm. Fully automatic machine filament collection to avoid tangle or knot caused by manual winding operation. And you will get a pleasure printing experience and enjoy yourself totally.
  • 【Clog-Free & Bubble-Free】TPU Printingt filament material is completely dried for 24 hours before vacuum packaging. It can effectively protect the TPU filament from moistur and guarantee clog-free and bubble-free. You won't have any trouble of bubble and clogging and just enjoy your delicate printing.
  • 【Printing Effect& Settings】TPU 3D printing material has bright color and smooth surface and with the....
Check Stock

AMOLEN 3D Printer Filament, PLA Filament 1.75mm,Glow in The Dark Multicolor Rainbow, Change Every 5 Meters, 3D Printing Filament +/- 0.02mm,1kg/2.2lbs

  • PLA GLOW IN THE DARK MULTICOLOR - Every 5 meters color change with blue,green,purple,pink, like rainbow in the dark.After exposure to the strong sunlight or UV light for only 30 minutes, the pla filament will have a amazing glow effect. It’s better to print large model,so that all the luminous colors will be displayed.Because the number of glowing color and its glowing effect depend on the printing grams and model..
  • HIGH QUALITY GLOW FILAMENT - Amolen use the most advanced glow materials, PLA raw materials come from USA. 1.75mm pla filament consistent diameter and high dimensional accuracy..
  • VACUUM & REUSABLE BAG: Vacuum packaging with desiccant to keep it dry and keep out dust, a reusable bag with sealing strip, pla filament can be put back into bag after used.100% no tangle,machine auto wind,fixed hole steady.a perfect storage condition..
  • HIGH COMPATIBILITY : Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler. 1.75mm pla filament diameter, accuracy +/- 0.03mm. Don't worry it does not apply to your printer..
  • WARRANTY & AFTER-SALES SERVICE: Amolen is focus on high quality 3D PLA filament, defective filament can be reissued or refunded fully.We provide professio....
Check Stock

ERYONE Filament Dryer Box for 3D Printer Filament,Filament Storage Holder,Spool Storage Box,Keeping Filaments Dry,Compatible with 1.75mm 2.85mm 3.00mm Printer Filament

  • 【Filament Dryer and Storage】The Eryone Dry Box keeps the filament dry and removes moisture from various filaments, giving you better print results and can be used to dry the filament for storage,Sealed protection, comprehensive dustproof..
  • 【Real-Time Monitoring of Temperature and Humidity】The filament drying oven has an LCD screen that displays the humidity and temperature inside the drying oven in real time..
  • 【Even Heating】The unique design of the built-in fan in the box, the air circulates, so that the filament is heated more evenly,Desiccant (not included in the package) is put into the drying box to improve drying efficiency and can be recycled..
  • 【Easy To Use】Three temperature adjustment, users can adjust the temperature of the drying box according to different 3d filament types, ambient temperature, humidity and other factors.Set temperature 40°C-45°C, 45°-50°C, 50°C-55°C..
  • 【High-Quality After-Sales Service】We provide a 12-month warranty for the whole machine with built-in instructions, if you have any questions about the operation of the product, please feel free to contact us..
Check Stock

JAYO 3D Printer ABS Filament 1.75mm, 1kg× 5 Bundles of ABS Consumable,Accuracy +/- 0.02 mm, Impact and Abrasion Resistant, Fit Most FDM Printers, ABS Black+White+Gray+Red+Blue 5kg(11lbs)

  • 【Strong and Durable ABS Filaments】JAYO ABS FDM 3D Filament is a material of strong and tough thermoplastic polymer—great for creating parts which need to be resistant to high temperatures, such as children toys, shoes, daily supplies, ect. No risk of sun or hot melting.
  • 【Accuracy & Less-Tangle】JAYO ABS filament is advanced precisely diameter measuring in the manufacturing process. The dimensional accuracy is +/- 0.02 mm. Fully automatic machine filament collection to avoid tangle or knot caused by manual winding operation. Give you a pleasure and smooth printing.
  • 【No Clog & No Bubble】1.75mm ABS filament spool is clog-free and bubble-free for completely dried for 24 hours before vacuum packaging. It can effectively protect the ABS filament from moisture. You won't worry about bubble and clogging, just enjoy a smooth printing.
  • 【Printing Settings】The JAYO ABS filament material recommended nozzle temperature is 240-270℃, and bed 85℃, which can make ABS melt well and get a better printing effect.
  • 【Five colors】ABS 3D printing filament have 5 regular colors, black, white, gray, blue and red. Meet your daily printing needs. And ABS White can be dyed with other colors well. JAYO Filament unlocks your creativity.
Check Stock

BIGTREETECH Filament Runout Sensor Smart Filament Detector 1.75 mm Filament Break Detection Module in 3D Printer Accessories for SKR Mini E3 Octopus V1.1 3D Printer Control Board

  • ❤【Auto Filament Runout Sensor】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament..
  • ❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH..
  • ❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament..
  • ❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/GEN L control board..
  • ❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer..
Check Stock