Reviews Fiberglass Reinforced Plastics

West System 655-8 G/flex Epoxy Adhesive, two 4.5 fl oz.

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

WEST SYSTEM - 655-2QT West System 655-2 QT G/Flex Epoxy Adhesive, Two 1 qt & Dynatron 3 Pack Spreaders, 358

  • Product 1: EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • Product 1: IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • Product 1: OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • Product 1: BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes an....
Check Stock

WEST SYSTEM - 655-2QT West System 655-2 QT G/flex Epoxy Adhesive, two 1 qt

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

Master Appliance 30313 Element Kit for Heat Gun Model Ah-752

  • Industrial quality with powerful high speed universal motor, dial-in temperature setting for specific heat settings, rugged die-cast aluminium housing and attached, rubber-base back for hands-free use.
  • Ideal for activating adhesives, bending plastics, Thawing frozen pipes, removing dents in fiberglass, shrinking heavy gauge shrink-packaging, stretching vinyl, stripping paint and more.
  • Easily replaceable reinforced mica-insulated ceramic heating elements for user-friendly maintenance.
  • 6 ft., 3-wire grounded cordset made with flexible, oil and sunlight resistant rubber jacket.
  • Temperature and power ratings: up to 1000-Degree Fahrenheit/540-Degree Celsius at 17400-Watts. Assembled in the USA using foreign and domestic parts.
Check Stock

FVIEXE 5PCS Bubble Paddle Tool Set of 5, Fiberglass Resin Laminating Bubble Roller Set Fiberglass Roller Aluminum Alloy Mold Resin Composite for Tub Shower Bathtub Boat Repair

  • PREMIUM MATERIAL: The fiberglass roller is made of high-quality aluminum alloy material by mechanical finishing, durable and long time to use..
  • MAIN FUNCTION: These fiberglass resin laminating rollers is used to level and compact the resin coating and drive away bubbles. It is an economical and practical hand pasting tool..
  • ENVIRONMENTALLY FRIENDLY: These aluminum rollers meet the industry standard for durability and ease of cleaning..
  • EASY TO CLEAN: Plastic handles are solvent-resistant for easy cleaning. It can be cleaned in acetone, which can save time and labor, and can effectively improve labor efficiency and product quality..
  • APPLICATION: Bubble paddle tool is widely used in the production of glass steel, glass fiber reinforced plastics, and the inner surface of bubble puncture in your home decoration..
Check Stock

10pcs 13 Inch Fiberglass Cable Wire Running Rod Coaxial Electrical Connectable Fish Tape Pull Kit Fishing Rod Pull Push Tool Electrical Fish Tape Set

  • High Quality: Fish tape cable rods are made of fiberglass material, includes 10pcs fiberglass running cable (13 inch ) with threaded brass connectors, 5pcs connector and 1pc x lead wire..
  • Wide Usage: For running wire through walls, attics, crawl spaces, sub-floors and suspended ceilings, your best choice to finish difficult electric wiring installations by pulling and pushing cords through the toughest spaces easily .The fiberglass cable wire running rod is strong flexibility, but do not bend too hard, or it will break, wear-resistant and anti-oxidation..
  • Excellent Extensibility: This fish tape kit is flexibility(don't over force), rigidity and great insulation, wear-resistant.The extension rods can be connected together to achieve the required length..
  • Convenient To Store: With bright blue color, fiber reinforced plastics wire cable running rods are highly visible and the whole set comes in a lightweight plastic storage pole, very convenient to store..
  • Excellent Toughness: This fish tape is strong flexibility (but do not bend forcibly while using), and the low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.More advantages: wire pulling tools set item is of strong flexibility, wear-resist....
Check Stock

U.S. Chemical & Plastics SMC Resin QT (USC-58215)

  • USC Garage Pouches are your premier single-use solution in the body repair and refinish category, used by DIYers and pros alike.
  • From dents and small repairs on aluminum, steel and fiberglass to repairs around the home on wood, metal and plastics.
  • USC Garage SMC/Fiberglass Filler is a waterproof filler, structurally rated to repair sheet molding compound and works on fiberglass.
  • Its also easier to sand than conventional fiberglass fillers.
Check Stock

West System 650-8 G/Flex Toughened, Versatile, Liquid Epoxy Resin and Epoxy Hardener, Permanent Waterproof Bonding Of Fiberglass, Ceramics, Metals, Plastics, Damp & Woods, 4.5 Ounce x 2 Bottles

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

West Systems G Flex Epoxy Adhesive Tube 655k

  • EXCELLENT ADHESION to hard-to bond woods. This toughened, versatile liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. It can be modified with WEST SYSTEM fillers and additives and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs and a workable cure in 7-10 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass. Can also be used to wet out and bond fiberglass tapes and fabrics..
  • MAKES STRUCTURAL BONDS that can absorb the stress of expansion, contraction, shock, and vibration. G/flex can be used on damp or wet surfaces, and even underwater when applied with specific techniques. Perfect for r....
Check Stock

101PCS Power Rotary Tool Cutting Wheels, Resin Cutting Discs 1/8inch Mandrel Fiberglass Reinforced Cut Off Wheel

  • 101pcs Fiberglass Reinforced Cut Off Wheel with 1 Mandrels Included (1/8 inch Shaft Fits Standard Rotary).
  • This is a cut-off disc - only cuts along its edge. Ideal for cutting, grooving and cutting all kinds of metal and fine wood, plastics and ceramics.
  • With low heat generation and thin cutting line, the cut off wheels are applicable to electric drills, hanging grinders, electric grinders, etc..
  • Keep a light touch, as the wheel will break under a lot of pressure.
  • They can be used to cut metal, plastic, chassis modification, thin metal circuit board and DIY production after connected with mandrels, and are ideal for olive cutting..
Check Stock

SOLAREZ Fastest UV Cure All-Purpose Repair Putty - Polyester Fiber Reinforced Cement DIY Epoxy Seal 3.5 Oz High Strength! Fix Anything in Minutes! Fiberglass Wood Metal Plastic Tile ~ USA Made

  • A mixture of high-strength, fiber reinforced polyester resin and amazing solar-activated catalyst..
  • Will remain liquid until direct sunlight hits it..
  • Quickly repairs Fiberglass, Wood, Metal, & Plastics.
  • These resins cure exceptionally dry unlike other UV cure resins that cure tacky..
  • Note: Not for use on EPS (styrofoam) cores..
Check Stock

AMRS-303-30370 303 Aerospace UV Protectant - 1 gallon

  • Acts as beautifying liquid sunscreeen for fiberglass, vinyl, rubber, plastics and sailcloth.
  • Immediately restores original color and gloss to faded fiberglass without buffing.
  • Periodic spray on and wipe off applications, usually every 45 to 60 days of exposure.
Check Stock

Rust-Oleum 211338 Specialty Spray Paint for Plastic, 12 oz, Black

  • Ideal for use on indoor/outdoor plastics including PVC, resin, fiberglass, polypropylene, polystyrene and vinyl plastics.
  • Oil based formula applies directly to plastic with no primer needed.
  • Dries to touch in 20 minutes and covers up to 10 sq. ft. per can.
  • Long lasting, durable spray paint promotes superior adhesion.
  • Provides excellent color retention and soft gloss finish.
Check Stock