Reviews Fiberglass Printed Circuit Boards

TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering

  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively..
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas..
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time..
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards..
Check Stock

BW-100 Freeze Spray - Diagnostic Cold Spray - For electronics, components, PCBs and More - Non-Flammable | 7 oz/200g | Pack of 3

  • EASILY DIAGNOSE: Spray on surface. Locate intermittently faulty electrical and electronic components and cool printed circuit boards. Spray to cool down.
  • APPLICATION: Use as a coolant on different thermal intermittent, computers, office equipment, electronic equipment, electronics, video/audio/communication equipment, circuit boards, plant machinery, lab equipment, and more.
  • VERSATILE USES: Quickly remove gum stuck to a fabric or other such adhesives plastered onto any other surface.
  • HOW TO USE: Remove security tab on the head for use. 5inch extension tube attached for easier use on unreachable areas. Spray short blasts.
  • MATERIAL COMPATIBILITY: Plastic safe (Please test on small area for compatibility before use).
Check Stock

Tenma 21-8240 Vacuum Desoldering Iron

  • 30 Watt: Powerful enough to remove common soldering mistakes found on small devices. Heats up quickly..
  • Easy Operation: Designed for right or left-hand operation. Quickly heats up and uses a strong vacuum pump to remove solder..
  • Lays flat: When not in use or when in-between jobs, the desoldering pump lays lat with the hot tip elevated to prevent from unwanted burns.
  • Used to correct mistakes with small boards on PCBs, re-solder mechanical keyboard switches, remove relays and other components from printed circuit boards, unsoldering old wires, desoldering computer parts like motherboards, clean alloy on smd components and more..
Check Stock

AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick 2.0mm/2.5mm/3.0mm Width 1.5m Length with Flux - Desoldering Vacuum Pump Solder Removal Tool

  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand.
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size.
  • geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs.
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable.
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering.
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size.
Check Stock

JVC KS-DR1004D 400 Watt 4-Channel Bridgeable Amplifier for Car & Marine and RZR/ATV/UTV/Cart Motorsports

  • VERSATILE: JVC’s marine and motor sports receivers and amplifiers feature compact size for versatile installation even in tight spaces.
  • DURABLE: Built tough with Conformal coated main PCBs (printed circuit boards) offer additional protection against moisture and condensation from damaging the product.
  • VARIABLE HPF & LPF: Compared with fixed type switching, more precise sound adjustment is possible to match your preferences.
  • SMALL BUT POWERFUL - Compact 4-channel amplifier for car, motorcycle, and boat 45 watts RMS x 4 at 2 to 4 ohms. 90 watts RMS x 2 bridged at 4 ohms Class D amp technology that is CTA-2006 compliant.
  • QUALITY SOUND - Separated circuit boards of the Pre-amp and Power-amp sections to reduce radiation noise, A Large Low Pass Filter coil provides stable, high quality sound with no distortion even when playing at high volume.
Check Stock

Micro Drill Bits - 10Pcs 0.3mm to 1.2 mm Tungsten Carbide PCB Print Circuit Board Tip Rotary Tool Jewelry CNC Engraving Drill Bits Set for PCB Circuit Board, Dremel PCB Jewelry Making (0.3-1.2mm)

  • PREMIUM MATERIAL - These mini drill bits are made of tungsten steel,carbide tipped drill bits with high hardness,high wear resistance, resistance to bending, anti-impairment.Replacements for your CNC machines and any Handheld tools..
  • MEET YOUR NEED - Cutting edge diameter of these PCB Drill Bit Set: 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2mm..
  • SHARP EDGE - End Mill Sets can milling groove and clean surface,a large scraps discharge space,little resistance and smoothly during the scraps discharge.These sets of tool can work quickly and cleanly..
  • IMPROVE ACCURACY - The end milling engraving bits with shape cutting edge,reduce cutting force and prevent drill broken,improve the drilling accuracy.Attention: Don't use on too hard material,like high hardness iron..
  • WIDE APPLICATION - The PCB drill bit sets are great for punching at printed circuit boards,cutting and engraving and worked on Acrylic, PVC, Nylon, Resin, Fiberglass,etc..
Check Stock

Hakko-CHP-170 Micro Cutter - Red & NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098\ Width, 10' Length

  • Depaneling tool separates printed circuit boards (PCB) in multiple circuit board production.
  • 40kg cutting force uses shearing action to prevent delamination of the board material.
  • Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces.
Check Stock

NINDEJIN 910pcs M3 Male Female Hex Brass Standoff Spacer with Pan Head Screw Nut and Washer Assortment Kit PCB Motherboard Standoff Screw Nut Assorted Kit

  • [Hex Brass Standoff Spacer Assorted Kit]: This kit includes male to female, female to female hex brass standoff spacer, with pan head screw, hex nut, washer, it's convenient for your electronics working, such as printed circuit board and motherboard..
  • [Quality of Standoff Screws]: Standoff spacers are made of brass, screw, nut and washers are nickel-plated, have good corrosion resistance and are passivated for enhanced protection. They may be mildly magnetic. The flat sides of the hex ensure a firm grip when tightening with a wrench..
  • [Motherboard Standoff Screw Using]: In electronics, they are frequently used to raise a printed-circuit board above a surface. Standoffs are ideal fasteners for keeping printed circuit boards both stationary and elevated away from surfaces, such as the interior of a computer chassis..
  • [Standoff Screw Nut Assorted Kit Package ]: Included Male-female, Female-female series, Hex nuts, and flat washers. These fasteners stored in a transparent plastic box, convenient for your storage and use..
  • [NINDEJIN After-sales Service]: If you have any problems with NINDEJIN screws assortment kit, please contact us by email or Q&A, we will give you a professional service and reply to you within 24 hours. We will provide Lifetime technical su....
Check Stock

Hakko CHP DP-24-N Depaneling Tool, Printed Circuit Board (PCB), 2.4mm Width, 2.5mm Isthmus Cut, 40kg Cutting Force

  • Depaneling tool separates printed circuit boards (PCB) in multiple circuit board production.
  • 40kg cutting force uses shearing action to prevent delamination of the board material.
  • Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces.
Check Stock

Weller WES51 Compatible Heat-Set Insert Installation Tips for M2, M2.5, M3, M4, and M5 Inserts Used for Connecting 3D Printed Parts.…

  • Designed and manufactured in the USA. The original long shank tip for the WES51/WESD51 iron. If you see others with these shapes not made by Virtjoule, they are copy cats. Longer shank than other tips allows you to reach deeper into 3D printed parts and tight corners to install heat-set inserts without touching your iron and melting the plastic..
  • Installation tip works better than soldering iron tip since conical tips can catch on the insert and accidentally pull the insert out while melting the plastic and ruining the part..
  • Tip sizes include M2, M2.5, M3, M4, and M5. M2.5 is a popular hole size for Raspberry Pi circuit boards. M3 is a popular size for Arduino circuit boards..
  • Compact tip cradle included to keep them together when they're not being used..
  • Wide size range gives you lots of flexibility to choose the right insert for your 3D printing project..
Check Stock

Elenco Practical Soldering Project Kit

  • Gain valuable experience working with printed circuit boards.
  • For 30 years Elenco has been using their strong engineering and design skills to develop reliable, affordable electronic test equipment, tools, and....
Check Stock

Elenco FM Radio Kit

  • Build this kit to assemble a monophonic FM receiver (88-108mhz) with electronic auto-scan.
  • Will help you understand the basics of working with printed circuit boards.
  • Become familiar with a variety of electronic components.
  • For 30 years Elenco has been using their strong engineering and design skills to develop reliable, affordable electronic test equipment, tools, and....
Check Stock

uxcell 5 Pcs Red DIP Switch 1Positions for Circuit Breadboards PCB

  • 1 Positions ( 1 Row 2 Pins)，Package Content: 5 x DIP Switch.
  • 1Way 2 Row Dip Encode Switch, Red color..
  • This DIP switch is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific situations.Widely used in data processing, communication, remote control and anti-theft alarm system need to manually automatic programming products..
  • Widely used in circuit boards, breadboards and all pcb projects, perfect as a toggle or on off switch for your projects..
Check Stock