Reviews Fiber Optical Video Convertor

LinSeek hdmi Audio Extractor, 4K Hdmi Audio Extractor Splitter, HDMI to HDMI +Audio(Optical/Coaxial/ 3.5mm Audio Jack), HDMI 4K@30hz Video Audio Converter Adapter for PS4, Xbox,TV

  • ...for various HDMI source devices.HDMI Input: Roku 4, Blu-ray player, Laptop, PS3/4 Pro, Apple TV, DVD, Xbox,HD player etc.HDMI output: Full HD TV, Monitor, Projector. Audio/ Coaxial/Optical Output: headphone, speakers, amplifier, 5.1CH system , bar speakers, or other sound systems.
  • HDMI to HDMI + Audio separator is a convertor and can realize HDMI video signal output to the TV, Also support the Audio output In this way the interface of Audio / Coaxial / Optical. It offers solutions for digital entertainment center, Hotel, HDTV retail and show site, HDTV, STB, DVD and Projector factory, noise space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments. Etc.
Check Stock

Primeda-tronic 8 Channel Analog Video Over Fiber Optic Converters with RS-485 Data,ST Fiber Connector, Single Mutlimode Fiber up to 0.93Miles (1.5Km), A Pair

  • This video over fiber optic is used to send 8 channels of analog video signals through one optical cable to remote display devices. Optical interface: ST..
  • Suitable fiber type: universal multimode fiber. Long transmission distance up to 1500m(0.93 miles) by a multimode fiber. With RS-485 data (reverse direction) for remote control PTZ..
  • Applicable for Analog cameras, Compatible for PAL, NTSC, SECAM Video format automatically . Note: Not support 1080P/960P/720P TVI/CVI/AHD HD Cameras and SDI camera..
  • LED indicators can dynamic feedback link connection state and fault detection to easily monitor network status..
  • Plug and Play, High Quality and Stable, Cost effective, Greatly save your engineering cabling cost..
Check Stock

Cord Magic: The Ultimate Guide to Knot Magic and Spellcrafting with Fiber for Beginners (Magic Spells)

  • Mini Converter Optical Fiber automatically switches between any SD, HD, 3Gb/s HD-SDI video standards and each direction can be completely independent..
  • Mini Converters support embedded SDI and HDMI audio and several models let you separately embed or de-embed analog or digital audio..
  • Mini Converters support 24-bit analog and AES/EBU audio and use standard 1/4" audio jacks so you don't need custom cables!.
  • You get bi-directional SDI to optical fiber conversion, with each direction independent of each other. Optical fiber cables span distances up to 28 miles without any deterioration to the signal..
  • Unlike other converters, a universal power supply is included with international socket adapters for all countries..
Check Stock

FiberCablesDirect - 0.5M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 0.5 Meter (1.64ft) | Length Options: 0.5M-300M | 1g 10g sfp+ 10gbase lc/lc dplx Yellow PVC ofnr lc-lc

  • Fiber Cable Description: OS2 LC to LC Fiber Patch Cable 0.5 Meter | 10Gig Duplex Single Mode fiber optic cable, 9/125 Corning optical fiber, yellow, OFNR (riser rated), 2.0mm outer diameter, zip-cord reinforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance, General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 0.5 Meter (1.64 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflec....
Check Stock

FiberCablesDirect - 1M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 1 Meter (3.28ft) | Length Options: 0.5M-300M | 1g 10g sfp 10gbase lc/lc dplx yellow zip-cord pvc ofnr lc-lc

  • Fiber Cable Description: OS2 LC to LC Fiber Patch Cable 1 Meter | 10Gig Duplex Single Mode fiber optic cable, 9/125 Corning optical fiber, yellow, OFNR (riser rated), 2.0mm outer diameter, zip-cord reinforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance, General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 1 Meter (3.28 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) ....
Check Stock

StarTech.com HDMI Over Fiber Extender (LC) - 4K 60Hz HDMI 2.0-3300ft (1km) Over Single Mode - 1000ft (300m) Over Multimode Fiber Optic Cable - Transmitter/Receiver AV Converter Kit (ST121HD20FXA)

  • HDMI OVER FIBER EXTENDER KIT: Extend an Ultra HD (UHD) 4K 60Hz HDMI 2.0 signal + 7.1 CH audio up to 3280ft (1km) over single mode or up to 985ft (300m) over multimode fiber cabling w/ an LC connector.
  • RELIABLE VIDEO TRANSMISSION: Fiber connection allows for uncompressed and uninterrupted video transmission & Electromagnetic interference (EMI) immunity and optical isolation for reliable signal integrity.
  • 3x Status LEDs for power/optical link/HDMI link.
  • SERIAL AND IR EXTENSION: Extend serial or IR signals over the fiber cable.
  • IR control extension kit includes 2x IR Receivers & 2x IR Blasters (IR remote not included).
  • RS-232 terminal block connectors for device or display control (up to 115.2Kbps).
  • EASY INSTALLATION: Point to Point connection between AV transmitter and receiver.
  • No IP configuration/drivers/network equipment required.
  • Durable steel housing w/ built-in mounting hardware for a tidy installation.
Check Stock

C2G 41372 4K UHD High Speed HDMI Active Optical Cable (AOC) Plenum, CMP Rated, Gray (75 Feet, 22.86 Meters)

  • HIGH SPEED – Supports 4K Ultra HD (UHD) resolution, 3D, Deep Color, Dolby True HD, DTS-HD Master Audio, and CEC control for a bright, clear video experience.
  • PLENUM RATED – CMP-Rated jacket is low smoke producing, and highly fire resistant, and is often required for audio/video installations in educational, hospital and other commercial settings. This cable is required for any installations in plenum air spaces, where no metal conduit is used..
  • ACTIVE OPTICAL CABLE TECHNOLOGY – Fiber optic strands provide clear, audio and video quality. Fiber, unlike copper, eliminates any possible interference that can disrupt or degrade the AV quality even at longer distances..
  • NO EXTERNAL POWER REQUIRED – The active optical cable (AOC) draws power from the HDMI source so there is no need to purchase an additional device to supply power to this cable.
  • PACKAGING – To ensure you receive the highest quality products C2G packages all product in C2G branded packaging.
Check Stock

FiberCablesDirect - 3M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 1g 10g sfp 10gbase lc/lc dx Yellow Zip-Cord PVC ofnr lc-lc

  • Fiber Cable Description: OS2 LC to LC Fiber Patch Cable 3 Meter | 10Gig Duplex Single Mode fiber optic cable, 9/125 Corning optical fiber, yellow, OFNR (riser rated), 2.0mm outer diameter, zip-cord reinforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance, General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Mode Type: OS2 (9/125 Singlemode) – 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications....
Check Stock

RiteAV - Direct Burial/Outdoor LC-LC 2-Strand Fiber Optic Cable - Multimode (50/125) - 75M (246ft)

  • ...tion: 5m(16ft) SC/APC to SC/APC Fiber Patch Cable OS2, SC cable single mode is 9 / 125 μ m. 10GBASE-L (1310 nm), 10GBASE-E (1550 nm). Sheath material: LSZH fiber Color: yellow. The outer diameter is 2.0mm.
  • The model of this fiber is a 5m- 16ft SC/APC - SC/APC single- mode optical fiber fiber with fiber diameter of 2.0mm and LSZH. It is very durable for indoor use and meets all UL, CUL, IEC and ROHS standards. This optical fiber patch cord is very suitable for home and office. It is used to connect 1g/ 10g/ 40g/ 100g Ethernet cables..
  • This SC/APC - SC/APC fiber patch cord is used in Gigabit Ethernet, fibre channel, LAN, data center, building installation, Wan, commercial and other high-density applications. We have been verified by the authority of the industry that the single-mode optical fiber jumper completely meets the needs of optical fiber professionals..
  • Our optical fiber jumper has high-quality materials: the optical fiber jumper is made of environmentally friendly LSZH material. The jumper is soft and has a strong texture. It will not fade or break, nor will it deform and withstand high temperatures. Ceramic connec....
Check Stock

Mini 3G-SDI Video Extender with SDI Loop Output 1080P 3G-SDI Fiber Converter Extension of Distances Up to 20km Over Single-Mode Optical Transceiver with Tally or Reverse RS485

  • 3G-SDI Optical Transceiver supports 1-channel 3G/HD-SDI Video (audio embedded) & Tally or Reverse RS485 signal transmitted via fiber optical cable, and monitor the signal locally over a 3G/HD-SDI loop output.
  • HD Fiber Converters includes one transmitter and one receiver for 1080P 3G/HD-SDI signal, transmits video signals up to 20km over a single fiber optic cable.
  • Each channel includes 8-channel audio embedded, automatic cable equalization, used for all rate below 3.2 Gb/s (Belden 1694A).
  • Directly compatible with 3G/HD-SDI camera systems, support hot swap and hot plug.
  • Handle all Pathological patterns, fully digital non-compression broadcast level transmission.
Check Stock

Fibergaga-1m(3ft) OS2 SC/APC to SC/APC Fiber Patch Cable Single Mode Fiber, Simplex, Length Option: 0.5M(1.6ft)-75M(246ft) 9/125μm Fiber Optic Cable

  • fiber information: 1m(3ft) SC/APC to SC/APC Fiber Patch Cable OS2, SC cable single mode is 9 / 125 μ m. 10GBASE-L (1310 nm), 10GBASE-E (1550 nm). Sheath material: LSZH fiber Color: yellow. The outer diameter is 2.0mm.
  • The model of this fiber is a 1m- 3ft SC/APC - SC/APC single- mode optical fiber fiber with fiber diameter of 2.0mm and LSZH. It is very durable for indoor use and meets all UL, CUL, IEC and ROHS standards. This optical fiber patch cord is very suitable for home and office. It is used to connect 1g/ 10g/ 40g/ 100g Ethernet cables..
  • This SC/APC - SC/APC fiber patch cord is used in Gigabit Ethernet, fibre channel, LAN, data center, building installation, Wan, commercial and other high-density applications. We have been verified by the authority of the industry that the single-mode optical fiber jumper completely meets the needs of optical fiber professionals..
  • Our optical fiber jumper has high-quality materials: the optical fiber jumper is made of environmentally friendly LSZH material. The jumper is soft and has a strong texture. It will not fade or break, nor will it deform and withstand high temperatures. Ceramic connector, with low signal loss, can be used more safely..
  • We have focused on optical fiber jumpers for 15 years. Each cable is ....
Check Stock

HDMI Audio Extractor Converter, 4K@60Hz HDMI to Toslink SPDIF + RCA(L/R) Stereo Analog Out, Audio EDID Management, HDR10, HDCP 2.2, 18Gbps Bandwidth, AV Access HDMI 2.0 Audio Splitter

  • 【[email protected] HDMI 2.0 Audio Extractor 】 Professional [email protected] audio convertor supports audio extraction from HDMI signal and converts it to Optical Toslink SPDIF audio output or a high quality analog 2-Channel stereo output. It outputs analog 2CH 3.5mm stereo or digital S/PDIF 2.1/ 5.1CH surround sound..
  • 【Audio EDID Management】HDMI to HDMI and Audio convertor supports audio EDID mangement, there are 3 options to choose, audio of HDMI out, audio of SPDIF out and audio of audio out..
  • 【Professional Configuration】Audio splitter supports high resolution up to [email protected] (YUV 4:4:4 8bit). It supports standard HDMI 2.0 with HDR10 and 3D effect. It supports HDCP 2.2/1.4. It allows CEC passthrough..
  • 【Fantanstic Audio Passthrough】Supports fantastic audio passthrough, it supports atoms, True HD, Digital, DTS Digital, DTS HD Master, DTS 7.1&5.1CH. It simply extracts audio from HDMI and drive it through 2CH stereo or AV receiver without connecting television..
  • 【Certification and Protection】HDMI audio extractor splitter is certificated by FCC and CE. It provides built-in Surge/ Lightning Protection and Superior ESD Protection: +/- 8KV (Air-gap discharge) +/- 4KV (contact discharge) to prevent thunder strikes. 1-Year-Warranty f....
Check Stock

SC/UPC Fiber Optic Attenuator 10dB, 2 Pack，in-Line Attenuator, Male/Female, Single-Mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB

  • ✅SC/UPC Fiber Optic Attenuato: SC/UPC Male to SC/UPC Female, 10dB, Singlemode fixed, Ceramic Core material, 2 Pack. Provide SC adapters to ensure the connection between fiber patch cable..
  • ✅Low Insert-loss & High Return-loss: Polarization dependent loss ≤0.2dB and Return Loss: ≥ 50dB. Using an attenuator to prevent over saturating an optical receiver when the optical power is too high and ensures low bit error rates preventing damage to receiving fiber optic equipment..
  • ✅Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
  • ✅Feature: Light weight, small volume, high accuracy, good stability and convenient operation..
  • ✅Attenuator Application: Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver..
Check Stock