Reviews Fiber Optic Splicing Closure

Jonard Tools RST-8514 FTTH Riser Cable Slitting Tool

  • [Professional Design]: Fibrlok Fiber Optic Mechanical Splice is designed to accommodate 250-900µm buffer sizes..
  • [Features]: Fibrlok Fiber Optic Mechanical Splice is known for its low reflection characteristics of -35dB and has a thermal stability of -40°C to 80°C.
  • [Easily installed]: High rate of success for installation and easy installation, the average connecting time is 150 seconds.
  • [Application]: Applicable for optical fiber splicing and restoration for damaged lines.
  • fiber axial solid fit, reducing the performance degradation caused by the loss of matching fluid.
Check Stock

FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves for SUMITOMO with 36000 Cleaves and Coating Diameter: 250μm - 900μm 12 Position Blade Cold Connection Tools Fiber Equipment Used in FTTH

  • FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves Used in FTTH, Applicable fibers: Single-Mode or Multimode Silica optical fiber.★ Cold Connection Tool Equipment Bare fiber diameter:125um,Coating diameter:250-900um.
  • Cleaving angle: 0.5-0.8 degrees with single fiber..
  • Replicable Blade: Contained 16 Position Rotatable blades, Blade life: Provides approximately 48000 times (100*16*3) cleaves.★ Durability & Compact body: High hardness aluminum alloy materials, Lightweight and rugged design for longer life and increased durability..
  • Scientific Design: The fiber cleaver Built-In Fiber Holder can hold 250μm and 900μm fiber with a readable scale for accurate cleave lengths from 5 to 20mm and also has a built-in trash can for easy disposal..
  • High Precise Cleaving: Provides a cleave with a cutting angle of less than 0.5°for optimal fiber preparation for fusion splicing, Coating Diameter: 250um ~ 900um buffer fiber. Large & small adjustable knife, easy to operate. Non-slip bottom,easy to use..
  • Wide Application: Ideal for field splicing applications, splicing trucks, laboratories, fiber technicians, fiber splicers, and anyone that needs to cleave a fiber optic cable prior to performing a fusion splice..
Check Stock

Fiber Optic Fusion Splicer with 4.3-inch Touch Screen, Optical Fiber Fusion Splicer Kit Features 7s Splicing and 18s Heating- 6481 Series

  • Key Technical Facts Matter – 1) 4 high precision motors.
  • 2) 7s fast splicing, 18s highly efficient heating.
  • 4) 5mm fusion for ultra-short cleave length.
  • 6) 300 groups of splice modes, 100 groups of heating modes, 10000 groups of fusion records storage.
  • Easy to Operate, Wide Compatibility – 1) 4.3-inch touch screen with graphical interfaces for smooth operation.
  • 2) All-in-one fixture meets fusion demands of multiple optical fibers, jumpers and rubber-insulated wires.
  • 4) Multiple fusion modes and heating modes are available.
  • Other Features – 1) High Precision Ceramic V-groove and ceramic presser foot, ensure fiber loading becomes more convenient and accurate, also easy for clean and maintenance.
  • 2) Intelligent Heat Shrink, the heater won’t work until the fiber is detected by the embedded sensor to avoid scalding.
  • Pluggable large-capacity lithium-ion battery – 6800mAh built-in battery satisfies 220 times of splicing and heating, good for longer field work.
Check Stock

Fiber Optic Wands (Box of 48) - Fiber Optic Wand with 3 Light Modes (White)

  • White Fiber Optic Wands - Bulk Box of 48 Fiber Optic Wands.
  • WHITE FIBER OPTICS: Elegant white glowing fiber optic strands make these fiber optic wands popular for wedding send-offs, anniversary celebrations and white dress events. These Fiber Optic Light Sticks are 13 1/2 Inches in length. This package includes 48 bright fiber optic light stick wands..
  • 3 LIGHT MODES: Each White Fiber Optic Wand has 3 different light modes that include Steady Light Mode, Fast Flashing Mode and a Slower Flashing Mode..
  • BATTERIES INCLUDED: White Glowing Fiber Optic Wands each come with pre-installed batteries and are ready to go right from the package. Simply remove the battery protection tab and press the button to turn the White Fiber Optic Wand on..
  • USES: Fiber optic wands for Wedding Send Off, LED Sparkle Sticks, Festivals, Christmas Party Light Wands, New Years Glow Wands, Concerts, Sporting Events, Glow Party Light Sticks and Entertainment. Fantastic for Glow Party Celebrations and as light up sparkler glow wands for wedding send off..
Check Stock

Fiber Optic Jacket Stripper Coaxial Cable Stripping Cutter Tool Cable Cutter Crimper 45-163 + 45-162

  • ADJUSTABLE BLADES - This fiber optic buffer tube stripper has adjustable blades that you can set for any depth to ensure nick-free jacket entry into fiber optic buffer tubes.
  • EASY TO USE - This fiber optic stripping tool provides a comfortable and secure grip that helps make the fiber optic stripping process easy and efficient.
  • FIBER OPTIC STRIPPER - CATV UTP/STP Fiber optic stripper used for stripping simplex fiber and a variety of fiber optic cable. 45-162: for (0-1/8") / (0-3.2mm) Coaxial Cable, 45-163: for (1/8-7/32") / (3.2mm - 5.6mm) Coaxial Cable..
  • WIDELY APPLICABLE - Fiber optic tools can also be used to screen twisted pair cable, Twisted stranded cable, CATV cable, CB cable, SO, SJ, SJT and other types of flexible power cord.
  • UNIQUE DESIGN - 45-162 / 163 coaxial stripper is easy to carry and use. It is very suitable for family or daily use..
Check Stock

SKYSHL Core Alignment 4.3inch Touch Screen FTTH Optical Fiber Fusion Splicer (With 5pairs Electrodes,Fiber Cleaver and Tool Set) Handheld SM MM DS NZDS Fiber Splicing Machine (SS414F)

  • ★Core Alignment Fusion Splicer★--SKYSHL SS414F is a core alignment fiber fusion splicer with advanced image processing technology.
  • in order to ensure high-precision fiber core-to-fiber core alignment and splicing, SS414F adopts high precision CMOS camera, optical system and servo system.
  • and use high-precision CNC machining of optical fiber fixing clips, V-shaped grooves and other metal parts..
  • ★Fast splicing and heating★--The SKYSHL SS414F welding machine uses a powerful high-speed motor and a high-performance CPU, which can achieve a fast splicing time of 6 seconds and a heating time of 13 seconds (fast mode), which greatly improves the work of the engineer Efficiency.
  • SS414F fusion splicer is very suitable for data center, Metro, LAN and FTTx fiber projects..
  • ★4.3-inch touch screen design and durable appearance design★--SS414F optical fiber fusion splicer is equipped with a 4.3-inch TFT touch screen, which is simple and intuitive to operate. The SS414F optical fiber fusion splicer adopts a lightweight and sturdy aluminum alloy shell and an integrated silicone protective cover, which makes it resistant to impact, windproof, waterproof and dustproof, so as to meet the requirements of various harsh environments..
Check Stock

Winzwon Car Led Lights Interior 4 Pcs 48 Led Strip Light for Car with USB Port APP Control for iPhone Android Smart Phone Infinite DIY Colors Music Microphone Control

  • ▸【10 Meters (32.81ft) Optic Fiber Band Car Ambient Lights Interior】 Sewing edge: 3.0mm. Led Power: 1W (DC 12V)..
  • ▸【Flexible & Cuttable Optic Fiber Cable】 With 0.5mm thickness fin easily fix the fiber optic into the gag of door panel. With 1mm clip makes the fiber optic coincide with the gap of door panel, firm, not easily fall off. The optic fiber pipe can be cut for your needs..
  • ▸【Simple Fiber Optic Installation】 Step 1: Using the scraper to fix the fiber optic into the gap of door panel. Step 2: When cutting, make sure that 12mm is fully inserted into the light source, and then cut the fin. Step 3: Fix it with a screwdriver, take care not to tighten it, otherwise it will not transmit light..
  • ▸【Usage】 For all kinds led fiber optic illumination engine and decoration such as optical fiber hanging lamps, ar interior decoration, Artistic adornment in graphical and 3D artistic design.
  • Interior fiber optic light decoration of KTV, pubs, coffee houses, hotels and restaurants and so on..
  • ▸【Safe to Use】 IP68 Waterproof, Environmental protection, low power consumption, high brightness, extremely low heat, touchable and safe for children. Package included: only 6mts optic fiber (not including the LED light sources)..
Check Stock

FTTH Fiber Optic Tool Kit 18 in 1 with Fiber Optical Power Meter and 1KMVisual Fault Locator and Cable Cutter Stripper Tool 6C Fiber Cleave Multi-Function Equipment Tool

  • aluminum alloy visual fault locator fiber optic cable tester meter for CATV test Universally connector for test different ST,SC,FC interfaces.
  • Handheld fiber optical power meter FC SC cable tester, Wavelength range: 800~1700,Power measurement range: -70~+10.
  • 6C High Precision Fiber Cleaver is an instrument for high precision fiber cutting.It is a multi-purpose optical fiber cutter, the product uses the 16 cutting points and has a longer service life ..
  • FTTH fiber optic drop cable stripper is used to peel 250FTTH fiber optic drop cable stripper is used to peel 250FTTH fiber optic drop cable stripper is used to peel 250 coating of 125 fiber optic coating of fiber optic coating of fiber optic.
Check Stock

Fiber Cutter Stable Performance High Automatic Blade Return Lightweight Fiber Cutter (Orange)

  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do term use..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Check Stock

Ethernet Cable Fiber Optic

  • The Residential Solution - Our SC APC fiber optic ethernet cable extender is the Fiber cable of choice for Fiber to the home Networks.
  • Compatible with - Verizon Fios, ATT internet cable, Google Fiber, Century link, UniFi Dream machine and more FTTH Fiber optic networks & hardware.
  • 50% Thicker Jacket - Our 3mm cable is more robust than the standard network fiber optic cable which is 2mm. This SC APC Singlemode fiberoptic cable meets all UL, cUL, IEC & RoHS.
  • Fiber Optic Connector Included - SCAPC Adapter included with each cable for easy extension or connection from incoming PON fiber cable.
  • Save Money - Don’t spend $100+ on expensive single mode sc replacement cable installations when you can DIY for a fraction of the cost.
Check Stock

Fiber Cutter, Fiber Cleaver Aluminum Alloy Tungsten Steel ABS Unbreakable Portable High Accuracy for Net Installation

  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
Check Stock

Bangun SC/APC to SC/APC Fiber Optic Internet Cable, Armored Single Mode Patch Cable, Fiber Optic Jumper Optical Patch Cord - SIMPLEX - 9/125um - OS1/OS2 Compatible, LSZH White, 1m

  • Replacement fiber optic cable for ATT Fiber modem/router, Verizon Fios. This Optical Fiber cable suitables for all networks, CATV, FTTH, FTTB and FTTP systems, it is commonly used for Verizon Fios, Google Fiber and more FTTH in-home Fiber optic network optimizations and extensions. Most customers use our SC/APC to SC/APC cables for in house ONT (Optical network Terminal) relocation. They use this fiber patch cable to re-route their Fiber Optic Networks or extend their fiber internet cable..
  • Stronger Fiber Optic Cable with Armored: Stop struggling with patch fiber cable been chewed by your pet. This fiber jumper cable built-in a stainless steel tube inside to protect the inner core(fiber glass) from damage like pet chew. Also use protective LSZH outer jacket to strengthen the structure of cable. It retains all the features of a standard patch cord, but is much stronger. Pressure resist and Wear resist..
  • White Fiber Optic Internet Cable specially designed for needs of white application of home Fiber Optic Installers. White fiber patch cables can match your white equipment and white trim. We designed this white patch cables to meet customers need of decor colors. ....
Check Stock

Fiber Cleaver, Aluminum Alloy, Tungsten Steel, ABS, Stable Performance, Fiber Cutter, High, Low Error, Light Weight for Maintenance (Black)

  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Check Stock