Reviews Fep Cable

Siraya Tech 2 Pcs NFEP Film - A4 Size (210 X 297mm) Better Durability Fewer Layer Lines Accurate Print Results Great for Resin Printing Better Performance Over FEP for LCD DLP 3D Printers

  • Higher Print Success - Siraya Tech NFEP Film is an upgraded version of the FEP film. It is made of stronger materials and can create more accurate and smooth prints. It greatly improves the success rate of printing. Siraya Tech NFEP Film is very suitable for resin printing and has better performance than FEP film..
  • Better Durability - Siraya Tech NFEP Film allows users to print out high-quality 3D models multiple times without changing the film frequently. Siraya Tech NFEP Film is more durable and long-lasting than traditional FEP film..
  • Fewer Layer Lines - Siraya Tech NFEP Film has a higher-quality surface than FEP film so that the generated print model does not have too many serious layer lines, and more high-quality models can be printed..
  • Accurate Print Results - Siraya Tech's high-quality NFEP film was originally developed for laser SLA printers and large-format MSLA. Its peeling performance is better than standard FEP film, and more accurate printing results can be obtained..
  • Faster Print Speed - Siraya Tech NFEP Film is faster than ordinary FEP film printing models because our NFEP Film has ultra-high ultraviolet light transmittance, which can allow an appropriate amount of ultraviolet curing..
Check Stock

LANKEGU 3 PCS nFEP Film 260x200x0.127mm NFEP Film Sheet, nFEP(PFA) Release Film fo ELEGOO Saturn, Saturn S, Photon Mono X, Mono X 6K, M3 Plus, Sonic Mighty 4K 8.9-9.25 inch LCD Resin 3D Printers

  • NFEP film is big improvement over traditional fep film: Better durability, fewer layer lines, accurate print results, Great for Resin Printing..
  • High print success rate: NFEP Film offers excellent peel performance over standard FEP film. As such you will have much less failed prints as compared to using FEP films, and prints don't stick to nfep nearly..
  • High transmittance: The 3D release nfep film has high transmittance, and the transmittance is over 95%, which makes the printed products more perfect and provides product quality..
  • Easy to install, thinner than fep: simply follow the instructions comes with the package, you can easily replace the NFEP film in a few minutes. (NOTE: NFEP is softer than standard FEP and thus easier to scratch.Please use caution when installing and cleaning.).
  • NFEP Film is the best choice for printing a perfect model: 260*200*0.127mm nFEP(PFA) Release Film fit fo rELEGOO Saturn, Saturn S, Photon Mono X, Mono X 6K, M3 Plus, Sonic Mighty 4K 8.9-9.25 inch resin 3D Printers..
Check Stock

5PCS FEP Film 260x200x0.15mm, Release Film for Anycubic Photon Mono X 6K/ELEGOO Saturn/phrozen Sonic Mighty 4K/ 8.9 inch UV 3D Printer

  • 【Compability】Suitable for Anycubic Photon mono X/Photon S/ELEGOO Saturn/Creality LD-002H/QIDI Technology S Box and other 8.9 inch UV 3D printers..
  • Quantity: 5 pieces. Special FEP release film for 3D printing, using ultra-high purity FEP resin. It is made of hot melt extruded cast film. Has excellent non-stick, high temperature resistance, electrical insulation, mechanical properties, wear resistance and other characteristics..
  • 【High Transmittance】With over 95% light transmittance, this ultra-transparent film ensures high stability of UV lightning..
  • 【High Temperature Resistance】Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
  • 【Easy to Installation】 Easy to install, there are simple and easy-to-understand tutorials on the package to guide you to replace the FEP film..
Check Stock

6PCS Creality FEP Film Release Films 200 x 140 x 0.15mm for ELEGOO Mars/Mars 2 Pro/Mars 3/ANYCUBIC Photon/Photon Mono 4K/Phrozen Sonic Mini 4K/Creality Halot-one/LD-002R/LD-002H LCD SLA DLP 3D Printer

  • HIGH TRANSMITTANCE - The 3D release film, with high transmittance of over 95%, makes more perfect printing. Thickness: 0.15mm. Size information: 200 x 140mm. Package: 6 PCS Film..
  • WIDE COMPATIBILITY - Fit for ELEGOO Mars/Mars 2 Pro/Mars 3/ANYCUBIC Photon/Photon Mono 4K/Phrozen Sonic Mini/Phrozen Sonic Mini 4K/Halot-one/LD-002R/LD-002H/CL-60/Wanhao UV/MonopriceMini Deluxe/Nova3D/EPAX X1. Note: Not Fit for Halot one plus/Photon Mono S 3D Printer. Please confirm whether this FEP Film is compatible with your 3D Printer Before buying..
  • HIGH PURITY FEP - Special FEP release film, using ultra-high purity FEP resin. It is made from hot melt extruded cast film. It has excellent non-stick, high-temperature resistance, insulation, wear resistance, and other characteristics..
  • HIGH-TEMPERATURE RESISTANCE - Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
  • STABLE RELEASE FORCE - FEP melts at high temperature, passes through the extrusion equipment, and is poured into a similar plane to form with uniform thickness. Long-lasting durability, and stable release force. Strong ductility, excellent ductility, ductility up to 300%..
Check Stock

5PCS FEP Film 200x140x0.15mm, Release Film for Elegoo Mars 2 Pro/AnyCubic Photon/Photon Mono/Creality LD001/All 5.5 inch UV Resin 3D Printer

  • 【Compability】Suitable for all desktop LCD/SLA/UV 3D Printer which print size no more than 200 x 140mm, such as ELEGOO Mars 2 Pro/Anycubic Photon /Photon Mono/Creality LD-001..
  • Quantity: 5 pieces. Special FEP release film for 3D printing, using ultra-high purity FEP resin. It is made of hot melt extruded cast film. Has excellent non-stick, high temperature resistance, electrical insulation, mechanical properties, wear resistance and other characteristics..
  • 【High Transmittance】With over 95% light transmittance, this ultra-transparent film ensures high stability of UV lightning..
  • 【High Temperature Resistance】Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
  • 【Easy to Installation】 Easy to install, there are simple and easy-to-understand tutorials on the package to guide you to replace the FEP film..
Check Stock

Cooler Master MasterLiquid ML120R Addressable RGB Close-Loop AIO CPU Liquid Cooler, 120 Radiator, Dual Chamber Pump, Dual MF120R Fans, Independently-Controlled ARGB LEDs for AMD Ryzen/Intel 1151

  • 120mm Radiator: low profile dual chamber addressable RGB pump with dual addressable RGB fans for push and pull air flow. Air flow – 66.7 CFM. Noise level – 30.0 decibels.
  • Addressable RGB fans and pump – color option can be controlled through Cooler Master software cm Plus.
  • Removable pump cap: never worry about installing the pump upside down. Pop out the cap and place it. Done..
  • Includes: Wired addressable RGB Controller for non RGB motherboards for customize colors.
  • Sleeved FEP Tubing’s – sleek black outer sleeves with FEP Tubing’s inside for durable lasting and flexibility.
  • Includes 1-to-3 addressable RGB Splitter cable for multiple ARGB fans.
  • Cpu socket support: Intel – LGA2066, LGA2011-v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD – AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1.
Check Stock

Cooler Master MasterLiquid ML240R Addressable RGB Close-Loop AIO CPU Liquid Cooler, 240 Radiator, Dual Chamber Pump, Dual MF120R Fans, Independently-Controlled ARGB LEDs for AMD Ryzen/Intel 1151

  • 240 millimeter Radiator low: profile dual chamber addressable RGB pump with dual addressable RGB fans for push and pull air flow.
  • Addressable RGB fans and pump: Color option can be controlled through Cooler Master software centimeter Plus.
  • Removable pump cap: never worry about installing the pump upside down.
  • Includes: Wired addressable RGB Controller for non RGB motherboards for customize colors.
  • Sleeved FEP Tubing’s: sleek black outer sleeves with FEP Tubing’s inside for durable lasting and flexibility.
  • Includes 1 to 3 addressable RGB Splitter cable for multiple ARGB fans.
  • Refer to the PDF attached below in technical Specification for user Manual.
  • Cpu socket support: Intel: LGA2066, LGA2011 v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD: AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1.
Check Stock

Cooler Master MasterLiquid ML360P Silver Edition Addressable RGB Close-Loop AIO CPU Liquid Cooler, 360 Radiator, AIO SF360R Fan, Independently-Controlled LEDS for AMD Ryzen, Threadripper/Intel 1151

  • 360mm Radiator – Aluminum silver finish 360mm Radiator to remove excess heat from the CPU and cool with maximum efficiency. Air flow – 45 CFM. Noise level – 30 decibels.
  • Integrated fan design – integrated three 120mm fans into one 360mm square frame unit for a quick install and reduce loss of airflow to the radiator.
  • Dual dissipation – our low-profile dual chamber pump enhances performance and durability over our last-gen single chamber pump designs..
  • Fewer wires to worry about – Easy cable management with just 2 connectors for the integrated 360mm fan design.
  • Addressable RGB LED – addressable RGB LEDs on the pump and fans for full color customization that can be controlled through Cooler Master software master plus+.
  • Sleeved FEP – underneath sleek black sleeves, FEP material beats rubber tubing in keeping Liquid where it belongs – inside the cooler.
  • Cpu socket support – LGA2066, LGA2011-v3, LGA2011, LGA1151, LGA1150, LGA1155, LGA1156, AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1.
Check Stock

FEP Film (Ultra Pure FEP) / 1 MIL (.001\) (.025mm) Thick / (12\ Wide x 10' Long Roll)

  • Fluorinated Ethylene Propylene (FEP) Film.
  • Use at least 5 MIL or 10 MIL Thick FEP FILM w/ 3D Printers.
Check Stock

FEP Film (Ultra Pure FEP) / 5 MIL (.005\) (.127mm) Thick / (12\ Wide x 10' Long Roll)

  • Fluorinated Ethylene Propylene (FEP) Film.
  • It is recommended to use at least 5 MIL or 10 MIL Thick FEP FILM w/ 3D Printer Applications.
Check Stock

FEP Film (Ultra Pure FEP) / 2 MIL (.002\) (.05mm) Thick / (12\ Wide x 10' Long Roll)

  • Fluorinated Ethylene Propylene (FEP) Film.
  • It is recommended to use at least 5 MIL or 10 MIL Thick FEP FILM w/ 3D Printer Applications.
Check Stock

Sovol 3D Printer Resin Vat Anodized Aluminium with FEP Film & Steel Ring Preinstalled Durable Metal Frame Resin Tank with Double Silicone Covers for ELEGOO Mars ANYCUBIC Photon 3D Printer

  • Sovol 3D resin vat fits for ELEGOO Mars/ Mars Pro/ Mars 2/ Mars 2 Pro/ Mars C, Anycubic Photon/ Photon S/ Photon Mono/ Photon Mono Se , QIDI TECH....
  • Made of anodized aluminum and durable design for long term usage. Clear and wear-resistance measurements, easier to use and convenient for printing.....
  • With double silicone covers, keep the resin vat and FEP film away from dust, scratch, UV light source or direct sunlight. Perfect for resin storage..
  • 2021 New design single steel ring with upgraded FEP film, less effort to drill and install, no difference on function. If you need to replace the FEP....
  • Perfect spare resin vat when you need to change resin color faster and have a better printing experience..
Check Stock

5PCS FEP Film Release Film for ELEGOO Mars/ANYCUBIC Photon/Photon S/HALOT-ONE LCD SLA DLP 3D Printer, 200 x 140 x 0.15mm

  • 【Compability】Suitable for all desktop LCD/SLA 3D Printer which print size no more than 200 x 140mm, such as ELEGOO Mars, AnyCubic Photon/Photon S, Creality LD-001..
  • Quantity: 5 pieces. Special FEP release film for 3D printing, using ultra-high purity FEP resin. It is made of hot melt extruded cast film. Has excellent non-stick, high temperature resistance, electrical insulation, mechanical properties, wear resistance and other characteristics..
  • 【High Transmittance】With over 95% light transmittance, this ultra-transparent film ensures high stability of UV lightning..
  • 【High Temperature Resistance】Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
  • 【Excellent Ductility】Excellent elongation performance, ductility up to 300%, good flexibility, bending 10000 times..
Check Stock