Reviews Fender Pilot Light Assembly

Partsam Set RED AMBER LED Trailer Fender Bullet 3/4" Led Clearance Marker Light Left Right

  • Partsam SET(RIGHT&LEFT) Bright Red and Amber LED Trailer Fender Marker Lights.
  • Pre-wired assembly mounts on top or side of fender.
  • Pre-wired fender light assembly mounts on top or side of your fender to mark the widest point on your trailer. The bracket has 1 amber front clearance light and 1 red rear clearance light. For trailers over 80" wide. Sealed, waterproof lenses..
  • Amber LED light points toward front of trailer to act as front clearance light.
  • Red LED light faces rearward to act as rear clearance light.
  • 2-Wire design - includes ground wire and lead wire for power(Black is positive and White is negative).
  • Installs on left fender (driver's side) of trailer & right fender (passenger's side) of trailer, NO SCREWS INCLUDED.
  • LED Fender Lamps utilizing low profile single-diode LED lamps mounted into an equally low profile housing these lamps are durable, attractive and inexpensive.The LED lights are 3/4" Round. Housing dimensions: please check the pictures in the listing.
Check Stock

Upgraded 9003542 Natural Gas Pilot Assembly 9003542 Pilot Assembly Replacement for Natural Gas Water Heater,100109295 18324-190 Water Heater Parts Compatible with A.O.Smith Kenmore State GS and GSX

  • Excellent Quality：Upgraded 9003542 nat gas pilot assembly use high-quality raw materials which has undergone extensive testing by suppliers to ensure longer durability. 9003542 pilot assembly can perfectly solve the problems of water heater pilot light kept going out and water heater not heating due to thermocouple damage.Part may differ in appearance but is a functional equivalent to prior parts including:183824-190,9003530 pilot assembly..
  • Widely Applicable & Perfect Fit:9003542 natural gas pilot assembly can perfectly replace 183824-190, 9003542005,100109295 pilot assembly. Fits following brands and models:Kenmore water heater parts▶▶153333315HA, 153333316HA, 153333345, 153333346, 153333347, 153333445, 153333446, 153333447, 153333850,etc. A.O. Smith water heater parts ▶▶A.O. Smith FCV40, FCV50, GCV30, GCV50, GCVH30, GCVT40, GCVT40Q, GVR40, XCV30, XCV40, XCV50, XCVH30, XCVL40, XCVT40, XCVT40L,etc. State GS and GSX water heater parts▶▶ GS665HRRT100, GS665YRRT100, GS665YRRT101, GSX65HRRT100, GSX65YRRT100, etc..
  • Easy to Install:9003542 water heater pilot assembly is very easy to install. Shutting gas off, pull entire burner assembly. Take out the 2 screws on the mounting plate and remove old thermocouple and spark ignition. Gently unr....
Check Stock

Partsam RED Amber LED Trailer Fender Bullet 3/4" Led Clearance Marker Light Front Rear - Clear Set, Trailer Fender Lights, Trailer Fender Clearance Lights Assembly with Bracket Trailers Over 80" Wide

  • Partsam SET(RIGHT&LEFT) Bright Red and Amber LED Trailer Fender Marker Lights.
  • Pre-wired assembly mounts on top or side of fender.
  • Pre-wired fender light assembly mounts on top or side of your fender to mark the widest point on your trailer. The bracket has 1 amber front clearance light and 1 red rear clearance light. For trailers over 80" wide. Sealed, waterproof lenses..
  • Amber LED light points toward front of trailer to act as front clearance light.
  • Red LED light faces rearward to act as rear clearance light.
  • 2-Wire design - includes ground wire and lead wire for power.
  • Installs on left fender (driver's side) of trailer & right fender (passenger's side) of trailer.
  • LED Fender Lamps utilizing low profile single-diode LED lamps mounted into an equally low profile housing these lamps are durable, attractive and inexpensive.The LED lights are 3/4" Round. Housing dimensions: please check the pictures in the listing.
Check Stock

Partsam 2x 4 LED Clearance Trailer Fender Lights Amber Front Red Back 4 Diodes RH / LH

  • SET Pre-Wired Fender Clearance Trailer Light Assembly - RH & LH..
  • This dual-light, pre-wired assembly for the fender functions as both the amber front and red rear clearance lights for trailer applications more than 80" wide..
  • The assembly contains two lights with 4 Diodes each on a black, molded plastic bracket..
  • The bracket mounts on the top or side of most fenders to mark the widest point of the trailer..
  • Both Driver Side & Passenger Side are included(Red is positive and black is ground)..
Check Stock

Motorcycle Fender Motorcycle Mudguards CVO Style Rear Fender Fit for Harley Touring Street Glide 09-13, White

  • ...on hardware. It can effectively block mud and sand splashes and remind the vehicles behind you when your car is driving..
  • Package includes: 1 X set of LED rear fender system. Installation instructions are not included. Please make sure that this accessory is suitable for your motorcycle before ordering. Professional assembly is recommended..
Check Stock

Motorcycle Fender Motorcycle Mudguards CVO Style Rear Fender Fit for Harley Touring Electra Glide Road Street Glide FLHR 14-20, Red

  • .... It can effectively block mud and sand splashes and remind the vehicles behind you when your car is driving..
  • Package includes: One set rear fender system(As Picture Shown). Installation instructions are not included. Please make sure that this accessory is suitable for your motorcycle before ordering. Professional assembly is recommended..
Check Stock

Partsam LED Trailer Fender Light Set/2 - Double Face 4" LED Marker Clearance Lights 7Diode

  • Pair Double-face dual-light Pre-Wired Fender Clearance Trailer Light Assembly - Driver Side & Passenger Side. Wonderful and perfect lights to mount on your truck or trailers side fenders.
  • Function as: both the amber front and red rear clearance lights for trailer applications more than 80" wide. amber Clearance light facing forward and red Clearance light facing backwards.
  • Size: 8-1/4" long x 4" wide x 1 3/4" high approx. LED Qty: 7 Diodes on each light.The LED lights are 3/4" by 4" approx.Each LED is directly wired and water-tight sealed..
  • Each light is on a black, molded plastic bracket.great replacement for traditional light units on trailer.
  • perfect replacement for an enclosed trailer fender lights.
  • Both Right Side and Left Side are included.Typical trailer light, works as you would imagine.
  • Day and Night they are highly visible which make for safer traveling.
Check Stock

Meter Star Lpg Propane Gas Heaters/Ovens Replacement Parts Flame Pilot Burner Assembly Kit with Tubes

  • 【3 WAY PILOT ASSEMBLY】- 10002264 NG 3 way pilot assembly is composed of fixes bracket, gas pilot tube, thermocouple, igniter wire and thermopile..
  • 【PERFECT COMPATIBLE】- The Propane and Natural Gas Pilot Assembly fit for Majestic,Temco,Vermont Castings, Dutchwest, Monessen fireplace and stoves,can perfect compatible with the specified models,please check the models we listed below..
  • 【PREMIUM MATERIALS】- Natural Gas Pilot Assembly is made of premium material, it is durable and have a super long service life. When you install it do not over-bend the copper pipe. So as not to cause unnecessary losses..
  • 【REPLACES PARTS NUMBER】- Directly replaces this parts number:10002265 230-1781 4021-736 2103-011 2103-010..
  • 【3-YEAR Warranty】- This fireplace gas pilot assembly comes with a 3-year warranty. If you have any dissatisfaction, please tell us immediately to ask for a new or refund within 90 days from the purchase date. We will give you a satisfactory solution within 12 hours..
Check Stock

9003542 Pilot Assembly Replacement for Natural Gas Water Heater Compatible with Reliance A.O.Smith Kenmore State GS and GSX Replaces 100109295,9003542005 12-month warranty

  • 【NEW Upgraded Replacement】- This 9003542 is a new upgraded water heater pilot assembly. Made of premium material. It's designed for Natural gas water heaters and has a temperature setting of 190 degrees, have stable and durable performance..
  • 【High Quality Replacement Part】- 9003542 NAT gas pilot assembly include 22" gas pilot tube, 22-1/2" thermocouple, 21-1/2" ignitor. It's a perfect replacement for your natural gas water heater, make your water heater work normally again..
  • 【Perfect compatibility】- This pilot assembly compatible with Reliance, A.O.Smith, Kenmore, State GS and GSX natural gas water heaters, replaces part number 100109295, 183824-190, 9003530, 9003542005 and AP4867015, can perfect compatible with the specified water heater models, such as 6-30-Yors, 6-30-Yors-d, 6-30-Yort-d FCV, GCV, GVR, XCV and XVR serials.
  • please check the complete models we listed below..
  • 【About Installation】- Prepare tools: screwdriver, pliers.
  • Before you replace the NAT gas water heater pilot assembly, you should cut the gas supply, and take necessary protection measures. Please notice that do not bend the gas pilot tube repeatedly to avoid break it..
  • 【12-month Warranty】- Our 9003542 pilot assembly is made of premium material and have a super lon....
Check Stock

70366 Pilot ODS for Vent Free Propane Gas Wall Heaters for Mr Heater Enerco Heatstar

  • The 70366 Pilot ODS assembly was used on many of the unvented LP Gas wall heaters made by Enerco under the Mr Heater and Heatstar labels..
  • These models include: MHBF10LP, MHIR10LP, TSBF10LP, TSIR10LP, MHBF30LPT, HSBF10LP and others..
  • The 70366 Pilot ODS assembly has Dual Wire 33 Inch long thermocouple with the silver and brown transmitter wires..
  • The proper ODS Pilot Assembly must be used for the correct model number heater..
  • Please check the model and part number in your owner’s manual before ordering this ODS Pilot Assembly..
Check Stock

NEW SUN LED Trailer Fender Lights Pre-wired Dual Face LED Trailer Clearance Marker Lights Amber & Red - RH&LH

  • LED trailer fender light dual sided functions as both front and rear clearance marker light for trailers trucks.
  • Pre-wired assembly mounts on top or side of trailer fender, universal for any 12V vehicles.
  • 2-Wire design grounds through the mounting hardware, both driver side/passenger side.
  • Sonically sealed, durable polycarbonate housing and lens are waterproof.
  • 4 Bright bulbs provide dependable light and can be easily replaced.
Check Stock

Polar Lights Star Trek TOS U.S.S. Enterprise w/Pilot Edition Parts 1:350 Scale Model Kit

  • QUICK SPECS: 1/350 Scale, Over 200 Parts. 32” long. Molded in gray plastic with clear parts, water-slide decal sheet and pictorial assembly instructions. Skill level 2 – Suggested for modelers age 10+ PAINT AND GLUE REQUIRED..
  • FEATURES APLENTY: The kit includes a full shuttle bay and tiny bridge. It is engineered to accept the Polar Lights 1:350 scale U.S.S. Enterprise Light Kit (sold separately). The kit includes a large full-color decoration guide..
  • LARGE FORMAT: This 32” long kit is based on extensive research of the original filming miniature for authenticity. It includes a full -color assembly and decoration booklet..
  • ICONIC SPACESHIP: Build the iconic U.S.S. Enterprise from STAR TREK: THE ORIGINAL SERIES in 1 of 3 ways: 1st Pilot, 2nd Pilot or Production versions..
Check Stock

SP20075 Pilot and Igniter Assembly Replacement Kit Natural Gas Water Heater Assembly Fit for Rheem GE Smartwater Heater Water Heater Parts Replace GG50T06AVH00 AS39845 22V40PF1

  • ...-40F, 42V50-50F, 22V30S-30F, GE smartwater heater natural gas water heaters.
  • Replacement Part Number: Replace GG50T06AVH00 AS39845 22V40PF1, Fits for 22V40 PROF, 42V40 PROF, 22V50 PROF, 42V50-40 PROF, 42V40SPROF, 42V50SPROF, RHG PRO40-40F, RHG PRO50-40F, RHG50-50F.
  • High Quality Materials: our natural gas water heater assembly are made of high quality raw materials and have passed strict factory tests to ensure product quality. Help you solve the problem that the water heater cannot work normally due to the damage of the thermocouple, and the indicator light of the water heater cannot be on all the time.
  • Simple Installation: The pilot assembly replacement kit comes with an installation manual, and several simple installation steps can be easily replaced in 15-30 minutes. During installation, do not bend the gas pilot tube excessively, especially in cold environment, to avoid damaging the gas pilot tube.
  • Package Includes: pilot assembly, burner door gasket, screws, clips and instructions. Before replacement, please carefully check whether the product matches your water heater. If you have any questions, please feel free to contact us.
Check Stock